How to change a multipage PDF to a fixed percentage?

I need to change all pages (have tables with different h. and w.)
How to save this PDF to 80% for example?
Thanks.

Maybe with imposition software (e.g., Quite Imposing).
Otherwise return to the authoring file(s) -- edit there -- output fresh PDF(s).
Be well...

Similar Messages

  • How to change text in PDF doc. which is a musical score

    Hello,
    I'm new here, so please excuse me if I do or say something I shouldn't.
    I need to change the words in a musical score because the font is too small. OCR recognition doesn"t work because there are illustrations that are different from images or text... Is there a way to get in there and make the changes I need to do?
    Any help greatly appreciated.

    Thanks for the reply, but I have Adobe Reader 9 Pro. Will it still not 
    work ?
    Le 29 sept. 2011 à 29 sept. 11 - 16:09, Claudio González a écrit :
    Re: How to change text in PDF doc. which is a musical score
    created by Claudio González in Adobe Reader - View the full discussion
    Unfortunately, not with the free Reader.
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/3944833#3944833
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/3944833#3944833
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • How to I get multipage pdf file placed in my document to conform to the document that I set up?  I have InDesign cc and the pdf pages are placed outside of my document?

    How to I get multipage pdf file placed in my document to conform to the document that I set up?  I have InDesign cc and the pdf pages are placed outside of my document?

    Hi Rave,
    InDesign cc couldn't open the script, I get an error message that it is not a supported file type.  I tried this first before using the "place multipage pdf" in my InDesign document.  The script which comes with InDesign cc works, but places the pages outside of the document.  That's what I'm trying to figure out how to do.  I had no trouble doing this in PageMaker 15 years ago.  I don't know why it doesn't work on my computer??
    Thanks,
    Yerbamansa

  • How to view a multipage PDF in the form of a contact sheet?

    There are plenty of discussions over how to place a multipage PDF into an InDesign document ONE PAGE PER PAGE. But I fail to find out if there is a way (within a CS2 environment) to place a multipage PDF continuously as "thumbnails" either 1 : 1, or scaled down, filling each page in the document in a way similar to the Data Merge tool, for example - so as to create a contact sheet of the PDF pages.
    The only way I see is to place the PDF the usual way, export the document as individual images, and then make a contact sheet using Bridge or Photoshop - which I find rather inconvenient.
    Any hint, please?
    Thank you, Pataka

    In Acrobat Pro print to Adobe PDF.
    In the settings for Layout choose for instance
    16 pages per paper sheet.
    One get's a PDF with one or more new pages,
    which can be placed in ID if necessary.
    Sometimes that's called printing N-up, here 16-up.
    Best regards --Gernot Hoffmann

  • How to change numbers of PDF file in Adobe Acrobat Pro Extended #9

    I just combined 3 PDF files that had their own numbering into one. I have searched how to change this file into a consecutive numbering with no success. I do the steps outlined to open the Number options, but when filling in the blanks, and making choices, nothing changes on the pages ... just in the thumbnail section.
    HELP!

    Post your question in a forum for Acrobat. Adobe Reader can't change page numbers.

  • How to change contents of PDF

    Hello,
    I want to know is there any way by which i can change content of pdf.
    please tell me

    thanks..
    I have done that. using iText it is helpfull.
    Still there is a bit of problem.
    When I open the file adobe pdf is unable to open the file .
    where are foxyplayer can view it correctly with edited content so please can you
    show me possible changes to do so.

  • How to change Margins in PDF?

    Thank you in advance for your assistance. I am evaluating 8.0 Professional on my pc (XP SP2 w/ 3.5GB of RAM and 2.5GHZ CPU). I want to see if the Professional can modify margins of pdf files that I get from various places but I am not finding anything in the documentation or via google. This should be an easy thing to do, like in MS Word you go to "Page Setup" and change the margins. I cannot find this functionality in Acrobat 8.0. Can someone please tell me how to modify the margins? The document in it's present configuration wastes paper and leaves alot of it blank when it could be printed on. Trying to be a conscientious worker by not wasting paper and Acrobat is not cooperating with me.
    Thanks,
    Erik

    Dear Dimitri,
    That is super - a simple command.
    I just wish the folks at Adobe would do the same for those doing printouts.  When you are dealing with historical documents, many taken from microfilm, generally there is no consideration as to binding margins.  If one wants to wax philosophical on this, while technology changes ever so rapidly, one thing that is always viewable is the printed page or photo.  A classic exanple of technological change is sound recording.  We started out with cylinders.  Next came records, first 78 rpm, then 45 rpm for individual songs and 33 rpm for longer pieces.  Casette tapes and 8-track tapes were next, followed by CD's.  Now we have mpegs.  The conundrum was exemplified in one of the early Superman movies, wherein the history of Krypton was recorded on green crystals.  Technology is constantly changing, which compromises the ability to play back what has been recorded in the past.  At the National Archives and Records Administration in College Park, MD, some of the researchers' copies of motion pictures are on antique 1" Beta tapes.  The machines to play these, antiques in and of themselves, are in terrible shape.  The primary copies, however, are still on film, although one wonders how long these, too, will last.  I presume that these are stored under refrigeration.
    We can see the issue in condensed time with the development of computer operating systems and software.  While Microsoft has generally attempted to provide retroactivity, a document written in the newer versions of Office may be a .docx, whereas older software doesn't recognize this.  Fortunately, most friends are willing to downgrade their copies so I can read them.  Support for Windows XP will eventually vanish.  While this OS can continue to be used by those that have it, replacing peripherals such as scanners and printers may make this problematic.
    But, actual photos and printed pages are readable with the Mark 1 eyeball, regardless of how they are produced.
    Regards,
    Richard

  • How to create a multipage PDF with same template but dynamically varying data?

    Hello,
    I need to create a multi-page PDF where I need to use the same template but dynamically varying data.
    Eg Scenario:
    1. I have data for 5 material in my ABAP program.
    2. I have a PDF template in SFP which has a 2 page structure.
    3. Based on the number of materials (5 in this case), I need to generate a PDF which will have 10 pages (2 for each material).
    4. the generated PDF should be like the one shown below:
    e.g.  MATERIAL_PDF (pdf name)  
          |  Page1(Mat1[View1].data)
          |  Page2(Mat1[View2].data)
          |  Page3(Mat2[View1].data)
          |  Page4(Mat2[View2].data)
          |  Page5(Mat3[View1].data)
          |  Page6(Mat3[View2].data)
             .. and so on...
    Thanks,
    Aniket

    Isn't it just by setting the two pages into a form ( like an subform in the content ) and put the settings in a proper way?
    There is this setting, that the masterpage comes up everytime the pagecount is done.
    Example
    Page 1 3 5 --> Masterpage 1
    Page 2 4 6 --> Masterpage 2
    And the designview with the flowing data, you can do it by scripting to get to the next page after the pos is finished.
    Unfortunaly I do not got a system atm, so I hope the explaination give you a clue, where to search.
    Regards
    Florian

  • How to change ipod Mini battery sign to a percentage?

    Hey guys,
    just got a 2g ipod mini for my girlfriend (she didn't want a nano) and i want to change the battery meter to read as a percentage.
    I had the page bookmarked but Apple says it is deleted now (they probably cleaned out old posts) so if anyone has the steps or knows how to do this could you please post it?
    i like percentages better, lets me estimate easier.
    thanks for your help
    D

    I don't think you could do that. Besides if that's possible, it'll only be an estimate. So it'll be as good as a graphic estimate.

  • How to make hyperlinks in PDF doc open in a seperate PDF window?

    I created a "Main" PDF document and have various attachments in it including PDF. I created them with Insert, Hyperlink.  That works, however, if I have the main document open in PDF, and I click on one of the hyperlinks to open a PDF document, the main document is closed and the only window remaining open is that of the hyperlink I've accessed.
    I want to change this to have the PDF hyperlink within main document  open in its on window ...can this be done?

    Thanks for the reply, but I have Adobe Reader 9 Pro. Will it still not 
    work ?
    Le 29 sept. 2011 à 29 sept. 11 - 16:09, Claudio González a écrit :
    Re: How to change text in PDF doc. which is a musical score
    created by Claudio González in Adobe Reader - View the full discussion
    Unfortunately, not with the free Reader.
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/3944833#3944833
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/3944833#3944833
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Forums
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • How do I save changes to a PDF with AxAcroPDFLib.AxAcroPDF?

    I am using C# and have created a regular Windows form. I have used COM and registered AxAcroPDFLib.AxAcroPDF. Here is my code;
    axAcroPDF1.LoadFile("myfile.pdf")
    axAcroPDF1.Show();
    MessageBox.Show("Showing...");
    This works fine. But, just like the browser, I cannot save changes to the PDF. I have the full version of Adobe Acrobat installed, Standard 8.0. I also have the Pro. version 7.1.0 on another PC. When I click save I just get prompted to save it locally, just like I was in the browser.
    If I edit these normally, just via Adobe Acrobat Standard, I can save my changes. I cannot do it via the AxAcroPDFLib library.
    How do I save changes to my adobe acrobat pdf file in my program? Thank you for any help. please.

    I did this after I wrote this. I have looked at the documentation but I can't find what I am looking for. Is there another way to open a file for viewing that has the full capabilities or using the normal program...one that uses something besides AxAcroPDFLib.AxAcroPDF. The sample that did have a view used AxAcroPDFLib.AxAcroPDF so it wasn't helpful. All I need is normal program functionality of adobe standard or profession within the application. The users have a full version installed on their PC.
    Thanks again.

  • How to change background color of text in pdf based by font name

    Hi
    How to change the background color of text in PDF based by font name. Is there any option in Javascript. e.g: If PDF containing ARIAL font, the ARIAL text background color needs to be changed in red color for all pages. Same for all fonts with different different color in the PDF.
    Thanks in Advance

    Hi
    1) Is there any possibilities to highlight with different color based on font using javascript
    2) list of font used in PDF using javascript
    3) How to hilight the text using javascript
    Thanks in Advance

  • How do I change my default .pdf viewer in Firefox BACK to Adobe Acrobat ?

    HMRC website forms will not open in foxit. How do I change my default .pdf viewre in Firefox BACK to Adobe Acrobat ?

    AWESOME - PROBLEM WAS, AT THE TIME ADOBE AND FOXIT FILE TYPES WERE NOT APPEARING IN MY TOOLS/OPTIONS/APPLICATIONS TAB - THIS IS A MYSTERY . . . .

  • How do I set up my default viewer to view pdf annotations or how to I change my default pdf viewer to Goodreader?

    When I open a pdf it doesn't show any of it's annotations, comments, etc that someone else may have done on that file.  How do I get iPad's default pdf viewer to show the annotations or how do I change my default pdf viewer to Goodreader?

    AHA, completely different animal, try posting here...
    Using iPad

  • How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

    How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

    Anubha,
    It worked! Thank you so much.
    I'd opened file with the 'Open with' feature then clicking Adobe Reader,
    but that didn't do it. When I used 'Open with', then 'Choose default
    program...', it worked like a charm.
    Again, thank you!
    Jonathan
    On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

Maybe you are looking for