How to change a reminder mode in Nokia E7?

Hello! I am sorry for the English. I use the translator.
I need to appoint business which should proceed in a current of several days in calendar E7. I want to receive reminders each three hours while business will not come to the end. If I press the button to repeat during the next reminder, phone repeats a reminder in 5 minutes. How to make, that the repeated reminder has occurred in 3 hours? Thanks.

You can't. The maximum snooze delay is 60 minutes. You can set it in Options > Settings > Alarm snooze time.
Since 1610

Similar Messages

Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandana

user11225122 wrote:
Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>SHUT IMMEDIATE;
SQL>STARTUP MOUNT
SQL>ALTER DATABASE ARCHIVELOG;
SQL>ALTER DATABASE OPEN;
SQL>ARCHIVE LOG LIST;
SQL>SHOW PARAMATER SPFILE;
YOU WILL FIND THE LOCATION OF SPFILE
SQL>

How to change to local mode of IviDmm with GPIB connection?

Hallo,
I want to change to local mode of my hardware(HP34401A). I am using IVI for Comunication. There is a function in VISA but how can I get the VISA handle from the IVI handle?
thanks
Babak

Hi Babak,
viGpibControlREN
Purpose:
Controls the state of the GPIB Remote Enable (REN) interface line, and optionally the remote/local state of the device.
C Syntax:
ViStatus viGpibControlREN(ViSession vi, ViUInt16 mode)
Parameters:
vi
IN
Unique logical identifier to a session.
mode
IN
Specifies the state of the REN line and optionally the device remote/local state. See the Description section for actual values.
For more information see the NI VISA help file
Br,Sergei
"Only a life lived in the service to others is worth living..." - Albert Einstein

How to Change to AHCI mode on MSI P965 Neo MB

I have a P965 Neo MS-7235 (V1.x) Mainboard. My Bios is the Phoenix Award but I am not sure which version as I did not update it since I bought it about 4 years ago. (I will check & update this post if necessary).
I am not able to change to AHCI mode in the Bios as I am unable to find any options to do this change. My Wind 7 device manager shows Intel ICH8 2 ports serial ATA storage controllers.
Please advise. Should I update my Bios.? If so, how?
Thanks in advance.

The ICH8 chipset used on your mainboard does not support AHCI. There is nothing that can be done about it. No BIOS Update will ever change that.

[iPhone] How to change Portrait / Landscape mode.

I am tring to change view mode between portrait and landscape mode.
UIViewController has two UIViewes and I want them to be shown as a landscape mode.
I found the property of interfaceOrientation in UIViewcontroller.
but it is readonly.
Is there a way to change view orientation not with info.plist but with code.

You can call setStatusBarOrientation on the UIApplication class and then set your landscape view.

How to change from archive mode to noarchive mode

Hi,
I am running 10gR2 on Windows.
Does any one know the steps to change the database which is current in archive mode to noarchive mode?
Thanks

shutdown immediate
startup mount
alter database noarchivelog;
alter databae open;
archvie log list -- to check whether the archive mode is turned off or no.
Make sure you backup the database before and after.
Jaffar

How to change the power mode in Win 7

Hello,
I'm not really good in english (I'm dutch) only when i talking about games or something not at technical stuff but i'll try to explain
Since a couple weeks i have windows 7 running on this laptop.
First i had vista but that was bad. Windows 7 is working much better.
Anyway i did update my laptop with the drivers from this site.
When i was running it i was missing something.
On the right hand side where you can chance your "energy schedule" you can choose between low performence and balanced.
Well on vista i had also high performence but not now.
Is there an update for where i can chance that?
If so please can someone tell me where to find that update.
greetings,
me
took me 10 minuts to post this because of Your message contains profanity or inappropriate language.
In the interests of your fellow forum users, we would ask you to amend your message.

Hi
Windows 7 is a little bit different as Vista OS.
But you can change the settings in Power Options which can be found in Control Panel.
Go to Control Panel -> Power Options
There you can find these both options; Low performance and balanced performance.
The high performance is hidden you will need to click on the arrow which would open the option where the high performance mode is placed.
But you can also create an own power mode;
On the left you can find the option: Create power mode (or something like that.. sorry its just translated)
There you could find a option which allows you to choose the high performance.

X-Fi Elite Pro - how to change from Entertainment mode to Audio Creation m

Upon installation of my X-Fi Elite Pro, I was asked to choose one of three options, namely Entertainment, Audio Creation, and Gaming.
I chose Entertainment, simply because I listen to vast amount of music. However, I am also a Digital Music Creation student, so the Audio Creation mode is also appealing. Apparently each of these modes uses different hardware on the X-Fi PCI card.
The trouble is this - is there any way to change the mode in the installed Creative software, or do I have to run the entire installation process every single time I want to change the settings? That's a 20-minute round-trip.

atheos,
You can change mode whenever you wish, just go to Start> All Programs> Creative> Soundblaster X-Fi > Creative Mode Switcher. You can use that to select which mode you need, when you need it. For instance, if you are about to launch a game, switch to game mode first, or if you want to do some recording/audio creation, switch to the audio creation mode.
Cat

How to change 8800 reminder melody?

Is there any possibility to change melody of reminder events in organizer (not alarm clock)? It seems that I've searched everywhere in the phone and user guide also gives no answer. Thank you.

no you can't change for reminders..only alarms..
!!!OHOO!!!

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

On iCal,how to change the travel time mode from car to foot?

on iCal (Mavericks), how to change the traveltime mode before an event ? i only have the "time" choice with "5 min, 15 min, 30 min, 1 hour, 2 hours". I would like to choose "foot/walking" , "car" or "Train/bus".

America is only one of 197 countries in the world. So if you do not use a bike, your feet or public services to travel so, maybe 196 other countries do it :-)

How to change Layer Mode in Flash CS3?

Hello,
I would like to know how to change the layer mode to
"multiply" with flash.
I usually use photoshop CS2 to color my lineart. I set the
top layer (the lines) to "multiply" to make the white transparent,
and then apply color on layers underneath.
I want to learn how to color my art on Flash, but I'm still a
noob. I imported my bitmap lineart (inked by hand) and turned it
into vectors (modify>bitmap>trace bitmap). Then I created a
second layer underneath for the color, just like I would do in
photoshop.
But, the first layer's white areas are not transparent, so
the color is not visible.
So basically I just need to know how to change the top
layer's mode to "multiply" so I can see through the white areas .
Any help will be very appreciated.

Nicochi,
> So basically I just need to know how to change the
> top layer's mode to "multiply" so I can see through
> the white areas.
Convert the top layer's artwork (raster or vector, doesn't
matter) into
a movie clip symbol -- select the artwork and go to Modify
> Convert to
Symbol -- and you'll be set. Once the symbol exists, you'll
see mode
choices in the Property inspector.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

How to change connection mode on WEBDB

I would like to ask if anyone know how to change the connection mode on WEBDB from socket to HTTP, aside from configuring the formsweb.cfg is there any parameter I need to modify? Would be advisible to change my connection mode to HTTP? I have 2 remote site that I need to give access to our application (forms/reports) and we are connected using VPN, but unfortunately, our remote site could not display the forms. But in our local network I don't have any problem, everyone can display our forms. Currently my forms server is configure to use socket as my connection mode. Do I have to change my connection mode in order for my 2 remote site to access our forms?
Thank you for your help.
Mathew

You can't. iPod touches do not have a Disk Mode like other iPods.

How to change CMYK art to grayscale?

I am trying to change a CMYK vector file to grayscale in CS4.
I went to Edit/Edit Colors/ Change to Grayscale. The .AI vector art now looks gray on screen, but the title says "Icon.ai@100% (CMYK/Preview)". It still reproduces as a CMYK file and not Grayscale.
I can't place this into a 2 spot colour document. What am I missing?

Here is a recap -
- the vector file was received from the customer as a CMYK PDF file. It is to be placed in a two spot colour flyer.
- I used Illustrator CS4 to open it and convert it to grayscale. It will print black only in the flyer.
It looks grayscale on the screen and yet says "CMYK" in the title.
I am not sure where to look in the palettes to confirm its colour mode.
- When I place the file in my InDesign CS4 document and Package the document, it shows up as a CMYK file. When I delete the file from that document, I end up with one spot colour and one process colour (black) job which is what I want.
So, this vector file is confusing me. How do I tell in Illustrator if it is CMYK or grayscale?
How to change the color mode?
Thank you!

How to Change Password throgh ABAP

Hi All,
Could you please tell me How to change password Through SU01 without having role.
When i am going to click change password button it giving error message you are not authorize to change password.
How to change through Debug mode.
Regards,
Arif

Hi,
Firstly ,you are not supposed to do something that you are not authorised to do.
But still you need access by bypassing the Authorization then here is the way.
Create a Breakpoint in FM RS_TRANSACTION_TEST at line no - 34 .
1.Go to tcode SE93.
2,Enter Tcode as 'SU01'
3.start the debugger by putting '/h' in the command line and then execute.
4.You debugger will stop at line no 34 of FM RS_TRANSACTION_TEST.
5.the value of sy-subrc will be '4' at that point...CHnage the value of su-subrc to '0'. and then execute.
OR use FM - BAPI_USER_CHANGE
Regards,
Vikas

How to change a reminder mode in Nokia E7?

Similar Messages

Maybe you are looking for