How to change a Server with DC role to a member of a DC

Dear All,
I have a Server which is connected on the Local Network.
My server consists of 5 VM's.
I would like to make my Host Machine a DC and the all the VM's as the member of this Host DC. (I can do this...No Problem)
What I am worried about is, Later If I need to add my Host Machine Dc as a member of DC
of Local Network Domain Controller.
This means If i need to change the role of my DC to the role member of another DC!
Is it Possible? If possible then how to do it.
Thankyou and Regards,
Ahmed

Hi Ahmed,
Thanks for your reply.
Since your questions are related to Hyper-V, I am sorry to say that I am not an expert for Hyper-V. I recommend you to ask in Hyper-V forum below and you will get professional assistance there:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver&filter=alltypes&sort=lastpostdesc
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How to change ASE server name in windows

how to change the server name in Adaptive server enterprise running on windows

Windows is going to require a few more steps if ASE is running as a service.
Update all registry entries containing <servername> with <newservername>:
HKLM\SOFTWARE\SYBASE\Server
HKLM\SYSTEM\CurrentControlSet\Services\SYBSQL_<servername>[ _BS | _XP ]
NOTE: Doing a registry search on <servername> will bring up a ton of other locations, eg, legacy entries, ControlSet00X, etc ... not sure if all of these have to be changed, too ...
NOTE: Haven't installed any of the latest ASE packages in windows so don't know if SAP's gone an changed the HKLM\SOFTWARE sub-branch name from SYBASE to SAP
=========================
In addition to Ryan's notes:
- any other sysservers entries that refer to the old servername (eg, loopback)
- any remote servers would need to update their external/remote logins, remote servers and/or proxy definitions ... as appropriate
- if the ASE is involved in replication then you're looking at whole 'nother can of worms ... off the top of my head ... rs_databases, rs_idnames, rs_repdbs ... and of course any repdefs/subs that include the ASE name ?
- obviously (?) any monitoring/maintenance/operational jobs ... documentation ...

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

How to integrate File Server with Portal??

Hi all,
can any one tell me that how interegate the File Server With Portal Server??
In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
ie
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class :: class com.sapportals.wcm.repository.NotSupportedException
Exception Message :: Not Implemented
thease are the steps that i have taken
>created HTTP System..
>created WebDAV Repository.
>Created Cache.
>Created KM WebDAV System.
>Created Iview and in iview i have to specify the <b>Path to Initially Displayed Folder</b>
i have specified the folder of file server that i want to display..
but i get the same syntax error ..
infact i dint get that folder in KM.
But when i specify the folder that is present in KM its Work fine..
Now the Scnerio According to me is that File server is not integrated properly
if it would be integrated properly i would be able to see the folder of File server in KM...
am i correct ??
please Guide me to integrated the File Server Properly??
Points will be given for any help..
Regards
Vinit

Hi Vinit,
if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
HTH,
Carsten

How to change default Server NFS version in Solaris 10 ?

How to change default Server NFS version in Solaris 10 ?
I need to change default version of NFS server version, currently i have NFS_SERVER_VERSMAX=2, for changing NFS version i changed this variable in /etc/default/nfs, but still its using version 2,
Please let me know where else i need to change./
Thanks a lot in advance!!!

Did you change the /etc/default/nfs on the server or on the client?
What is NFS_SERVER_VERSMIN set to? The NFS server is allowed to use any version in the span of NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX.
NFS_SERVER_VERSMAX=4
The default of NFS_SERVER_VERSMIN is 2.
And, as mentioned, you will have to restart your NFS server for changes to take effect.
.7/M.

How to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

how to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

You just need to run the Web Server Configuration Tool to connect ColdFusion to IIS. It can be found in the ColdFusion program group off of the Start menu. Be sure to run it "As Administrator".
-Carl V.

How to register Essbase server with Shared Services?

Hello All,
How to register Essbase server with Shared Services?

Hello All,
How to register Essbase server with Shared Services?

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

How to connect message server with application server?

How to connect message server with application server?

Hello Damodar,
The connection is established at the time of installation only !!. At the time of installation you need to specify the Central Instance(message server in most cases unless you have a dedicated message-enque server).
Regards.
Ruchit.

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

How to change stored procedure with Table Valued Parameter

I am not sure how to change the normal stored procedure with Table Value Parameter.Do I have to create a separate Table or do I have to create a datatype. Can you please help me with this
ALTER PROCEDURE [dbo].[uspInsertorUpdateINF]
@dp_id char(32),
@dv_id char(32),
@em_number char(12),
@email varchar(50),
@emergency_relation char(32),
@option1 char(16),
@status char(20),
@em_id char(35),
@em_title varchar(64),
@date_hired datetime
AS
BEGIN
SET NOCOUNT ON;
MERGE [dbo].[em] AS [Targ]
USING (VALUES (@dp_id, @dv_id , @em_number, @email, @emergency_relation, @option1, @status, @em_id, @em_title, @date_hired))
AS [Sourc] (dp_id, dv_id, em_number, email, emergency_relation, option1, status, em_id, em_title, date_hired)
ON [Targ].em_id = [Sourc].em_id
WHEN MATCHED THEN
UPDATE
SET dp_id = [Sourc].dp_id,
dv_id = [Sourc].dv_id,
em_number = [Sourc].em_number,
email = [Sourc].email,
emergency_relation = [Sourc].emergency_relation,
option1 = [Sourc].option1,
status = [Sourc].status,
em_title = [Sourc].em_title,
date_hired = [Sourc].date_hired
WHEN NOT MATCHED BY TARGET THEN
INSERT (dp_id, dv_id, em_number, email, emergency_relation, option1, status, em_id, em_title,date_hired)
VALUES ([Sourc].dp_id, [Sourc].dv_id, [Sourc].em_number, [Sourc].email, [Sourc].emergency_relation, [Sourc].option1, [Sourc].status, [Sourc].em_id, [Sourc].em_title, [Sourc].date_hired);
END;

It's not clear how you would change the procedure. But assuming that you want to replace the existing scalar parameters with tabular input, this is how you would do it. You first create a table type:
CREATE TYPE Insertor_type AS TABLE
(dp_id char(32),
   dv_id char(32),
em_number char(12),
email varchar(50),
emergency_relation   char(32),
option1 char(16),
status    char(20),
em_id char(35),
em_title    varchar(64),
date_hired    datetime)
Then you change the procedure header:
ALTER PROCEDURE [dbo].[uspInsertorUpdateINF] @tvp Insertor_type READONLY AS
And finally you change the USING clause:
   USING (SELECT dp_id, dv_id , em_number, email, emergency_relation, option1, status, em_id, em_title, date_hired
FROM   @tvp) AS [Sourc] ON [Targ].em_id = [Sourc].em_id
The rest is fine as it is.
Erland Sommarskog, SQL Server MVP, [email protected]

How to set VPN server with static IP without DHCP on

I set up a new Mac mini server with OS X 10.9.1 and Server App 3.0.1
My ISP gave me a static bublic IP address.
I have on:
- web server
- mail server
- DNS server
without using DHCP, but now i want to set up L2TP/IPSec VPN server and it requires that i give start IP address of the VPN server.
Can i use VPN server w/out DHCP server on?
If yes, how?
If not, when i turn on the DHCP server, what i have to do with web, mail servers?

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

How to change the constant with which you multiplied a column

Hello,
I'm making a spreadsheet with prices in Dollars and then converting them to Euros. Obviously the exchange rate changes all the time, so I was wondering how I could multiply my column A of dollar prices by the current exchange rate to get my column B of Euro prices and then change the prices when the exchange rate changes.
Is it possible to just give the new exchange rate so that my numbers in column B automatically change?
I know I can just always click c1 = b1*1,34 (for example) and then fill down, and then at a later date remove all the prices again and do C1= B1*1,30 and fill down again but I was wondering whether there was an easier way to change the Constant with which you previously multiplied a column.
Thanks for your help, I hope my question was sort of understandable!
I've looked but couldn't find a similar post, sorry if I missed it!
Larissa

LarissaG wrote:
Hi,
This definitely helps! But is a bit inconvenient when you have lots and lots of rowns in Column A.
Oh well! I better get started.
Thank you!
That's because you are thinking about typing formulas into each an every row by hand. That would be horrendously inefficient and people would despise designing spreadsheets if it had to be done that way.
Using Jerry's example as the starting point,
Type the formula =B3*C$1 into cell C3 and hit enter.
Select cell C3
Drag down on the little circle at the bottom right corner of the selection box to complete the column. Alternatively, you can Copy then select the rest of the column and Paste.

How to change a Server with DC role to a member of a DC

Similar Messages

Maybe you are looking for