How to change agent upload frequency

Hi,
I am looking for a way to change the frequency at which the agent checks the local targets and uploads the information. The reason - say on the Dev database targets, I want to prevent Agent from collecting information frequently and uploading the OMR with lots of information..which I really don't need at the default frequency. Say, if the default is 5 minutes, I would prefer to have the agents on the Dev servers to check the local targets and upload information every 30 minutes....that way OMS/OMR server is not busy working for something which is not critical. How can I manage the frequency....any information or pointers would be appreciated.
Thanks
-Chandra

Chandra,
communication between agent and oms takes place every every couple of seconds. The agent monitors different "targets", e.g. Host target, database target, listener target, etc. Each target can be monitored via target-specific metrics. For example the host target has metrics: cpu util%, etc. Each metric has its thresholds and also it´s specific monitoring interval.
In your case, I would recommend to create a monitoring template for each target type of your dev host. In that monitoring template, you can increase the monitoring interval.
There is in fact a configuration parameter in $AGENT_HOME/sysman/config/emd.properties, called UploadInterval, but that does only regulate how often the metric data is transmitted, to the oms, not how often the metric is measured. Therefore it has no effect on repository size.
Regards,
Martin

Similar Messages

How you change the download frequency for a single Podcast?

I have iTunes 11.1.5 for Mac, and I can't find how to change the down load frequence , aka "check for new episodes" setting for individual podcasts. I've tried using the settings menu in the "My Podcasts" and the "List" podcast view. When I do this, I see these setting:
Keep
Download
Sort Order
Play Order
If I click on the "Defaults..." button, the top setting is "check for new episodes"
I have no problem with being able to change the default download frequency setting, but I am at wit's end with locating where I can change that setting for individual podcasts.

Bump.

MOVED: how to change the cpu frequency/voltage from bios for k8ngm2il(n force 410)?

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=98841.0

Quote from: tech_junkie on 11-July-06, 16:03:26
recently purchased an --msi k8ngm2il(n force 410) motherboard and an amd 64 3200+(venice core) processor..but now i cant overclock the processor from the bios settings,when ever i try to change the fid settings from the bios settings and try to reboot, the settings go back to its default value!so i cant change the settings!! so does that mean that i cant change the fid settings and overclock my processor??please help!!please tell me how do i cahne the cpu frequency??please
do you save the settings before exiting bios? also make sure that you clear your bios once by removing the battery for 10 min, in order to clear all rezidual information.

How to change the Horizontal Frequency?

I can change the resolution, but not the frequency (Hz) why?
Since I live in Sweden, a PAL land, I'd like to make sure my DVDs run at 75Hz. Running a DVD at the default frequence (which doesn't show, and I don't know how to find out) it looks like it converts PAL 50 Hz to 60 Hz, which is terrible.
(and yes I'm a newbie

I think I'm sort of right. I found this on the web talking about LCD displays:
Refresh rate, response time, flicker and motion-blur
There seems to be a lot of confusion and mis-information on these topics on the web; here's my clarification...
Refresh rate is the rate at which the electronics in the monitor addresses (updates) the brightness of the pixels on the screen (typically 60 to 75Hz). For each pixel, an LCD monitor maintains a constant light output from one addressing cycle to the next (sometimes referred to as 'sample-and-hold'), so the display has no refresh-dependent flicker.
There should be no need to set a high refresh rate to avoid flicker on an LCD.
Response time relates to the time taken for the light throughput of a pixel to fully react to a change in its electrically-programmed brightness. The viscosity of the liquid-crystal material means it takes a finite time to reorientate in response to a changed electric field. A second effect (which has a rather more complicated explanation) is that the capacitance of the LC material is affected by the molecule alignment, and so if a step change is brightness is programmed, as the LC realigns the cell voltage changes and the brightness to which it settles is not quite what was programmed. Unless 'overdrive' (which tries to pre-compensate for this effect) is employed, it may take several refreshes before the light output stablises to the correct value. Response rate for dark-to-light is normally different from light-to-dark, and is often slower still between mid-greys. VESA and others define standard ways of measuring response time, but a single figure rarely tells the whole story.
Manufacturers 'response times' rarely tell the whole story.
Unless combined with a strobing backlight, response times much below 16ms are likely to be of only marginal benefit, owing to more-dominant 'sample and hold' effects (see below),
The visual effect of motion blur is self-explanatory and it is fairly intuitive to realise that a slow pixel response-time will cause this problem. What is less obvious, but at least as important in causing motion-blur, is the 'sample-and-hold' effect: an image held on the screen for the duration of a frame-time blurs on the retina as the eye tracks the (average) motion from one frame to the next. By comparison, as the electron beam sweeps the surface of a cathode ray tube, it lights any given part of the screen only for a miniscule fraction of the frame time. It's a bit like comparing film or video footage shot with low- and high-shutter speeds. Motion-blur originating from sample-and-hold in the display can become less of an issue as the frame (refresh) rate is increased... provided that the source material (film, video, or game) contains that many unique frames. For LCD TV there is significant interest in the industry in strobing (flickering!) the backlight deliberately so as to reduce sample-and-hold motion-blur!
Glor

How to change agent port after installation

Hi ,
I am having oem 12.1.0.2
I want to change the default port from 3872 to 8006 i had already installed agent and need to change it now.
Thanks,
Sachin

Hi,
You can use 'emctl setproperty agent'.
1: stop the agent
2: emctl setproperty agent -name EMD_URL -value https://hostname.domain:port/emd/main/
3: start agent
Note that this procedure will change the agent port but will not update the agent target name (which includes the port number).
Regards, Mark.

How to change the Phone Frequency

I bought the Lumia 800 that have the windows 7.8 outside the country i live in now (Brazil).
I was informed that the frequency that my phone uses is different that the one it should be. Because of that, my phone can hardly ever get good internet signal.
I was also told that for the windows phone 8 there is a app that can fix this, but this app is not available in my market place. I wonder if anyone knows an app that can do this or some other way for me to fix it.
Thanks
Solved!
Go to Solution.

What is puzzling is that if compare specifications for quad band Lumia 800 for UK and Brazil can't see any differences as here:
http://www.nokia.com/br-pt/produtos/celular/lumia800/especificacoes/
http://www.nokia.com/gb-en/phones/phone/lumia800/specifications/#
In Brazil, the 1,900 MHz band is paired with 2,100 MHz to form the IMT-compliant 2,100 MHz band for 3G services, which might cause issues however.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to change the properties of waveform graph from time domain to frequency domain?

Actually, I want my output waveform graph give me the answer in x-component in frequency instead of time after the FFT. My output waveform graph gives the x-components in time instead of frequency. How to change the properties of the waveform graph?

vasus wrote:
Hi,
I amtaking sensor input signals through NI FPGA cRIO-9004. i am analysing this using wave graph. the problem is i am not getting accurate singal.How to decrease the frequency?
You are responding to a very old (8 years) thread, be aware that that might not be the best option.
However, you want to decrease the frequency? or increase?
What is the code you are running?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to change the frequency of pulse train on the fly using an array of values?

Hi all!
First I want to thank U for the great job you are doing for this forum.
Iam still busy trying to control a stepper motor, by sending pulses from my E-series 6024 to a compumotor s6- stepper Driver. I've managed to get it working. I desperately need to control the motor using the values from an array. I believe we can use two approaches for that:
1st - I can get an array of the "numbers of pulses". Each element must run for 10 milliseconds. Using that we can calculate the array of frequencies to send the number of pulses within 10 milliseconds for each specific element. Could we use the arrays of "number of pulses" and frequencies in a "finite pulse train " and up
date with each element every 10 millisecond?
2nd - Or Could we use of the frequency array in a "continuous pulse train vi" and update it every 10 milliseconds?
Please note that I must use the values as they are.
Can someone please built a good example for me? Your help will be appreciated.
Regards
Chris
Attachments:
number_of_steps.txt ‏17 KB
frequency.txt ‏15 KB

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change name of uploaded file

I am using the a multi-part form and the pl/sql gateway to enable users to upload files to portal. The files automatically get stored in the wwdoc_document$ table. The key to the file is a column called "name" which consists of a sequence number and the file type e.g. 4747.gif.. I want to change this name to a different value.
When I change it using the standard sql Update statement, none of the pdk apis work on the record; they all return errors. I am able to change this value as long as I use a unique value, I just can't run any of the wwdoc apis against the row after that.
Does anyone know how to change this value for a given row???
Mike Kleiman

See Upload taglib in Coldtags suite:
http://www.servletsuite.com/servlets/uptag.htm

How to change the frequency of a finite pulse train?

Hi all? I Know I’ve asked once a similar question, but I need a better answer. I would like some ideas or examples on how to modify the example in LV; "Finite Pulse Train Generation - Intermediate for AM9513-Based Devices",so that the frequency can be changed while the VI is executing.
Will i have any problem with I use this VI in a DAQ-STC-Based Devices(E-series)?

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

How to change DT-LTE, SCDMA to UNICOM,WCDMA ? I bought this from China but 3g and 4G frequency....

How to change DT-LTE, SCDMA to UNICOM,WCDMA ? I bought k30-t from China but there are 1800/2100 MHZ frequency bands in my country. This phone doesnt support 3G,4G in my country. How I can change frequency bands to 1800,2100 MHz l?

I learned from Apple store staff here in Amsterdam and a little internet search it is a 'hard coded' feature in iPhones and iPads sold in China. Can only be rectified by jailbreaking your iPhone. This problem ONLY exists when buying a i-product in China.
What my problem is, is that I fail to see why Apple should settle with the Chinese government about that government's wishes to control their citizens, and extend those same restrictions to faithful buyers from other nations. Apple should be able to provide me (and all the others that bought their stuff in China) a solution to this problem. If my iPhone had not been stolen in China, I would not have had the need to buy a new one there, it didn't make any difference financially and it was not made clear to me by Apple in China at the time of purchase that I was buying a less versatile product then that advertised superduper new iPhone 5 64Gb. I feel I have been cheated by Apple. Given my dedication to their products that doesn't feel right.
A civilized solution from Apple will be greatly appreciated.

How can I change Mobile Uploads to ios

how can I change Mobile Uploads to ios

Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/

How to change music in uc320?how to upload mp3 file into uc320?

Dear all,
how to change music in uc320?only one music in uc320?
how to upload mp3 file into uc320?
Thanks
John

I am evaluating the UC320 for a phone system replacement for our 100 locations.
Allowing us to add an MP3 file to replace the current one would be a HUGE cost savings.
This will help us cut cost when compared to the old system.
Currently we are spending $180 on an external mp3 player for an mp3 that’s 3MB in size.
If this system works out we are then going to recommend it to our 1800 franchisees.

Target down, Agent Upload/OMS refresh rate

Using 10.1.0.4.0 Grid Control,. OMS and all agents running on MS platforms.
Currently testing agents, and in particular metrics and alert rates...
The example I need to ask about is this...
We have an agent running on a server, on which several targets exist. We shutdown an Oracle Listener on the server, and after a few mins (this duration varies) we receive an 'Target Down' alert in OMS, and the associated email....
So far, so good...
However, how can the 'alert rate' be changed so that an alert is created immediately following the shutdown of the listener? Also, the alert remains several mins after the listener has been restarted...
The way EM currently works with alerts isn't very useful if users say the application is unavailable, but to DBAs using EM - (for several mins) everything looks okay!
Any help, appreciated :-)

Check uploadinterval in emd.properties:
Here is a description of this parameter
uploadInterval - Number of minutes to wait before the Agent uploads the XML files to the OMS. Default value is 30 (minutes).
You can change this to something lower but be careful about flooding the network if you've decreased it. May be something like 15 minutes will work for you.

How to change agent upload frequency

Similar Messages

Maybe you are looking for