How to change application in action pane CV area

Hi all,
I have an input schedule with EVHOT function. And this evhot refers to another application. When function works application in action pane changes.
I need to re-change the application in CV at action pane after EVHOT function runs.
I tried "Save the active session CV with this workbook" option but it did not help.
Also I thought Override Current View option can solve the problem but SAP help doc says
"The Override applies only to non EvDRE templates" but my input schedule contains evdre.
Do we have any chance for this issue?
Thanks and regards
Kadir

Hi Kadir,
The option available for now to change the application is "MNU_ETOOLS_CHANGEAPP" which throws you a prompt for selecting the required application.
As a work around for your issue what i suggest you is to use EVMNU instead of using EVHOT function to open the required Input Sheet(IS)/Report without switching the application but you need to hard code the Application name in that IS/Report which you open and should save those IS/Report in you current application aswell.
If this work around doesnt suits you, you can probably come up with the exact need for swithching between application, may be you can get some other work around to solve the issue from experts here.
Hope this helps,
Regards,
G.Vijaya Kumar

Similar Messages

  • How to change application in action pane

    Hi all,
    I have a def with EVHOT function. And this evhot refers to another application. When function works application in action pane changes.
    I need to re-change the application in CV at action pane after EVHOT function runs.
    Do we have any chance for this issue?
    Thanks and regards
    Kadir

    Hi,
    There is a setting 'Save the active session CV with this workbook' in Workbook Options that allows the system to memorize the current view with a workbook. If the setting is disabled (default) and you switch to a new application using EvHOT, the application in the current view is changed which is happening in your case.
    But if you enable the above setting  in your workbook options, the current view will revert to the workbook's application setting automatically when switching focus to it.
    Also, please post all BPC questions to this forum SAP Planning and Consolidation, version for SAP NetWeaver
    Regards,
    Deepti

  • How to change application owner of EPM11 planning application ?

    Hi Gurus,
    How to change application owner of EPM11 planning application ?

    Using this query i can find the application owner in backend :
    SELECT A.OBJECT_NAME AS APPLICATION_OWNER
    FROM HSP_OBJECT A, HSP_USERS B
    WHERE A.OBJECT_ID = B.USER_ID
    AND B.ROLE = 3;
    now i want to change Application owner ....please share if you know

  • How to change application store location?

    How to change application store location?

    Step 1: Launch the iTunes program and, if you are logged in, sign-out of your Apple iTunes account (Store – > Sign-out).
    Step 2: Scroll down and click “Change Country” – select the United States flag.
    Step 3: search for the app. I know it has to be a free app. For paid apps you have to use something that is not a CC.
    Step 4: iTunes will now require you to sign-in with your AOL, MobileMe or Apple ID. Instead of logging-in with your your existing Apple ID, click the “Create New Account” button and accept the “Terms and Conditions.”
    Step 5: Use an email address that’s different from the one that’s linked to main Apple account. Under Payment Methods, choose “none” for the Credit Card section, give some dummy address and you’ll then receive a verification email.
    Step 6: Click the link in that verification email and you’re done. To recap, you have now created a US based iTunes account and this will let you you can download any free app from the iTunes store even if the app is not available in your country.

  • How to change the default JRE when there are several version of JRE in Sys

    How to change the default JRE when there are several version of JRE in System?
    i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
    Now the JRE is jdk1.3\bin
    When run class that was compiled with jdk1.5,throw:
    java.lang.UnsupportedClassVersionError
    How can i change the jre to 1.5?

    There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
    Excerpts from sun docs:
    However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    Details are here
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
    My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
    Will update if i find more information

  • How to change application action for all Firefox users?

    Hi,
    Is there any way I can change application action for all FF users. I am using Firefox admin 0.5.9.3 and deploy FF 3.6 through GP.
    Thanks

    You can change the system colors based on the system you are logging on to.  We have many users here doing that. (Red for prod, Green for Dev, etc)  You cannot use the Sap signature Design theme as it does not allow color changing.  I explained this in another post and how to change it.
    Re: Set Color for several system with sap gui 7.20
    To answer your question on how to change this for ALL users... That I cannot answer as our user base differs and they change it as they wish.  Hope this helps.
    Regards,
    Zecher

  • How to Change Application Icons

    Does anyone know how to change the Icon on an application that iTunes shows the Artwork, but I can't copy or paste it to change icons. Any thought's?

    You can not change the icon for an application.

  • How to change standard PCA hierarchy for Controlling Area?

    Dear all,
    I'd like to change standard PCA hierarchy for Controlling Area. System doesn't allow me to do this with the following message:
    =====================================
    Standard hierarchy CIS for COAr 0700 already contains profit center(s)
    Message no. KM160
    Diagnosis
    You wish to change the standard hierarchy of a controlling area, however, profit centers have already been assigned to the hierarchy. For this reason, you may not change the standard hierarchy for this controlling area.
    =====================================
    How can I change it?

    I will clarify the business requirements behind this request.
    We are currently implementing PCA for a customer. However, technically, PCA was already switched on several years ago and it was used for some not-really-accounting customer functionalities (Z* reports) .
    So, currently the PCA hierarchy is total mess. No logical heirarchy, a lot of weird profit centers... Not posibly to use this for segment reporting at all. And I would like to sort this out for this project.
    Is it possible to reorganize current standard hierarchy? Remove profit centers and profit center groups out of there? Forbid postings?

  • I have an intel 2006/7 MAC. I can't figure out how to change the time zone. There are no cities to choose from in Mountain time. and when I choose other times..the time zone still does not change. Please help

    My time zone is not adjusting.....I don't see how to change it, in the first place..I'm given a list with no Mountain time inclusive cities.

    Try this to learn about using keys:
    http://www.apple.com/support/macbasics/
    You can also use your PC mouse.
    As for iPhoto, it sounds like you were trying to move files around in the library. That is a bib no-no in Aperture or iPhoto.

  • How to change the database in a business area

    Hello All,
    I am trying to figure out a way to change the database that a business area connects to. When I created the business area I selected to look at tables from the default database. Now I need to change that setting to connect to a different database. The tables are exactly the same on both databases. I just need to change the database that the business area looks at.
    Is there a simple way of accomplishing this? I want to avoid having to recreate the business area.
    Thank you very much in advanced for your help with this matter.
    Del Benavides.

    Hi,
    Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
    Hope that helps,
    Rod West

  • How to change order of action items

    I've got four photos involved in a "dissolve" action.
    When I see them in the HUD window, I would like to be able to re-order them. Can't figure out how to do this -- clicking and dragging doesn't work and I've tried do that while holding down various keys (alt, ctrl, etc), but to no avail.
    Can the order of the photos be changed in a way other than deleting and reselecting the photos?
    Thanks!

    Okay....never mind. Not sure what my problem was, but I just tried clicking and dragging again and it works.
    Time for more spiked egg nog...

  • How to change application for opening an online program?

    I am trying to open an online program for which I have previously downloaded a plug-in required to open and utilize this online application, however, my computer must be set to a default to open the program with ScriptEditor, which is not compatible for running this online program I need to use. Does anyone know how I can change these settings to open the program with my downloaded plug-in versus the ScriptEditor? Any help would be appreciated.

    If it’s actually an online program, it’d run in your web browser instead of being downloaded to your computer.
    If you downloaded a Windows program file, it can’t be run outside of Windows, CrossOver Mac, or Wine.
    (118655)

  • How to change application version?

    Hi,
    When i deploy my 11g application JDeveloper generates a version number, ... e.g. V2.0. How can i change it to an other number?
    Kind Regards,
    Andre

    Hi,
    Have you tried adding the version tag in the weblogic-application.xml file?
    something like
    <weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                          xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd"
                          xmlns="http://www.bea.com/ns/weblogic/weblogic-application" version="2.22.2.2.0">-Arun
    Untested

  • How to change application store password?

    Hi,
    Im new to iphones. How do i change my itunes/application store password?
    thanks

    http://support.apple.com/kb/HE36

  • How to change application.xml

    After I create a ear deployment profile. I don't see how to customize the application.xml.
    I don't see a standard entry like
    <module>
    <ejb>beans.jar</ejb>
    </module>
    and I would like to add it.

    Ok this is very wierd...
    I added the application.xml file, and it appears in my Projcect->ViewController->Application Sources->Meta-INF folder.
    I save it as
    <module>
    <ejb>beans.jar</ejb>
    </module>
    <module>
    <web>
    <web-uri>web.war</web-uri>
    <context-root>WebkidsAdminLite</context-root>
    </web>
    </module>
    but as soon as I deploy it changes it to
    just
    <module>
    <web>
    <web-uri>web.war</web-uri>
    <context-root>WebkidsAdminLite</context-root>
    </web>
    </module>
    Any ideas what is going on here?

Maybe you are looking for

  • EP 6.0 and BW in one system

    Hello everyone, We currently run EP 6.0 SP2 and BW 3.1 on separate systems and are looking at upgrading to EP 6.0 SP11 and BW 3.5.  We have a Netweaver sandbox system setup with both running in one system and I was thinking we could consolidate these

  • BPEL validation failed in "SOA Order Booking" Applicaton sample

    Apache ant log error message as follows: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Buildfile: C:\Documents and Settings\wb

  • Update query for XMLTYPE column

    Hello everyone, I have inserted xml data into XMLTYPE column of my table,xml data is something like this <Data type="FYI">                          <ID xmlns="http://orcl.com">T-1-1</ID> <Category>FRAME</Category> <ProductID>1</ProductID> <Name xmlns

  • Message ID error in Moni

    Can anybody help me in resolving an issue triggered while processing the message in XI server. Showing an error: Messade ID xxxxxxxxxxxxxxxxxxxx for pipe line CENTRAL version '000' already exist in system your information would be so helpful for us. 

  • Best method for keeping clients updated

    I have five seats for Creative Cloud, therefore five workstations that need updates installed on a regular basis. In common with most corporates (I imagine) we don't allow end-users to have Admin access, so IT have to do this for them. It can take qu