How to change Boot settings when Windows is not starting?

Ich bitte um Hilfe,
Ich habe unabsichtlich in der msconfig Anwendung bei start--> Erweiterte Optionen--> maximaler Speicher ein Häckchen rein gemacht und somit unabsichtlich den max Arbeitsspeicher
(wie mir erst später klar wurde) auf ca 2000 MB gestellt.
Leider ist es nun nicht mehr möglich den laptop zu starten, dies führt immer zu einem bue-screen und der HP Fehlerbehebung.
Was kann ich tun um das wieder um zu ändern?
Ich habe auch schon Versucht mit einem anderem OS zu starten (ubuntu auf SD karte) führt aber zu den selben Resultaten.
Was kann ich tun um das wieder umzuändern? (Am Besten wäre ein Befehl fuhr die Armin Console)
Vielen dank
Erebos

Please select your language from the drop down list at the top of the page to post your question in the language of your choice. The forum you posted in is for English only. If you do not find the desired language, support options for additional
international locations can be found by following the link below:
Bitte wählen Sie Ihre Sprache aus der Dropdown-Liste am oberen Rand der Seite, um Ihre Frage in der Sprache Ihrer Wahl buchen. Das Forum Sie im Thema ist nur für Englisch. Wenn Sie nicht finden, die gewünschte Sprache,
unterstützt Optionen für zusätzliche internationale Standorte können über den Link unten:
http://support.microsoft.com/common/international.aspx 
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • Bootcamp - Changed partition settings now Windows will not boot

    Hi,
    I suspect I've created a problem that I've made progressively owrse in trying to solve... Any help appreciated!
    A month ago I created a bootcamp partition (about 850Gig OS X and 150Gig for Win7), successfully installed Windows 7 and everything was fine.
    After an acciental delete of itunes media incident I thought I would create a Time Machine backup partition on the OS X part of the drive so used the Disk Utility to do so, making sure I "took" from OS X and not the Bootcamp partition. I now had three partitions: OS X (500Gig), a Backup (350Gig) and a Bootcamp (150Gig) (I now suspect some of you might be screaming I've created the problem here already...) noting that the 150Gig Bootcamp partition is still as it was and the diagram in Disk Utility has always shown it as the bottom section.
    Perhaps I'm being naive here but it never occured to me that splitting the OS X partition would have any impact at all on the Bootcamp partition!
    Anyway, now I'm unable to boot to Windows (black screen "No bootable device" etc message).
    Checking Finder, all the files on the Bootcamp partition still seem to be there - User settings/accounts, Program Files, the lot.
    Is there anyway I can easily rectify this? (eg put the Windows 7 disk in and repair the install or something?!)
    I tried deleting the extra Backup partition I created without luck (the space just gets greyed out and unallocated)
    Help! I really don't want to have to go through the whole mess of reinstalling Windows 7 on to the Bootcamp partition (that to my mind still hasn't been touched!)

    Your Boot Camp partition number probably changed, Windows does not like more than 4 partitions, you had 3 + Lion Recovery and one that Windows makes, and that is one too many.
    You can try running Windows startup repair from the disk, but>
    Before you do anything make a backup (a clone, for speedier disaster recovery)
    If startup repair fails then reinstalling Windows is called for, so while you are at it I would repartition the drive completely, put your Lion installation back on the Mac from your clone, make a new prtition in Boot Camp and reinstall Windows. Then if you have backups of the Windows side (Windows Backup or similar) restore the data.

  • Changed partition settings now Windows will not boot

    Hi,
    I suspect I've created a problem that I've made progressively worse in trying to solve it... Any help much appreciated!
    A month ago I created a bootcamp partition (about 850Gig OS X and 150Gig for Win7), successfully installed Windows 7 and everything was fine.
    After an acciental delete of itunes media incident I thought I would create a Time Machine backup partition on the OS X part of the drive so used the Disk Utility to do so, making sure I "took" from OS X and not the Bootcamp partition. I now had three partitions: OS X (500Gig), a Backup (350Gig) and a Bootcamp (150Gig) (I now suspect some of you might be screaming I've created the problem here already...) noting that the 150Gig Bootcamp partition is still as it was and the diagram in Disk Utility has always shown it as the bottom section.
    Perhaps I'm being naive here but it never occured to me that splitting the OS X partition would have any impact at all on the Bootcamp partition!
    Anyway, now I'm unable to boot to Windows (black screen "No bootable device" etc message).
    Checking Finder, all the files on the Bootcamp partition still seem to be there - User settings/accounts, Program Files, the lot.
    Is there anyway I can easily rectify this? (eg put the Windows 7 disk in and repair the install or something?!)
    I tried deleting the extra Backup partition I created without luck (the space just gets greyed out and unallocated)
    Help! I really don't want to have to go through the whole mess of reinstalling Windows 7 on to the Bootcamp partition (that to my mind still hasn't been touched!) and have to download the dozens of gigs required to reinstall the software currently present.

    It has and can be done but backup to the same drive is rather pointless, shadow copies and file revisioning... external and separate. I thought with Lion and notebooks that there already is a temporary hidden backup folder, hidden, check iwth Lion Comm. already.
    Boot from Windows DVD and do some BCD magic to get it back.
    You changed the partition ID number.
    I wish we could be more flexible:
    OS X
    Windows
    Data
    so that Windows wasn't relegated to the inner slower platter tracks for one.
    you can get it repaired.
    Also, there are programs and even Windows 7 will create a system recovery CD and image... something you should be doing already so you never face loss or if a worm/mal/trojan/virus should cause havoc.
    https://discussions.apple.com/thread/3293948

  • How to change Camera settings while NetStream is published with H264 codec

    Hi,
    when I'm using H264 codec I can't modify my cam.setMode(w,h, fps) because my stream hangs (second call to cam.setMode() uhangs video. When I'm using Sorenson codec that same code works fine.
    So my question is how can I change Camera settings when I'm publishing images from this camera with NetStream encoded with H264. I'm using Flash Player 11,3,300,270 Windows 7 64 bit ActiveX.
    Swf compiled to target Flash Player 11.3, swf-version=16.
    Regards

    Try to unpublish/pause publishing just before setting the things on camera and resume/publish again after the settings are applied.
    C

  • How to change mouse setting on windows

    I just installed boot camp and got it working fine but is there a way to change the settings in Windows so I dont have to click down hard on the mouse pad to click on something. I want it like I have on OSX where i can just do a light tap on the mouse pad and it will click on the item.
    Thanks

    On the Windows task bar you will find the Bootcamp icon which when clicked opens the Bootcamp control panel. In the Bootcamp control panel are the trackpad and mouse settings. Set as you would like.

  • How to Change Security Settings on an Existing Wireless Network

    I'd like to change existing network security settings to WPA2, AES or at least to from TKIP to AES.
    I'm familiar with browser access to the router and with how to change the settings on the router.
    My question is how to do this as painlessly as possible for the network.  Step by step would be nice
    I guess first I have to change the router settings using the computer running Easy Link Advisor?
    Do I then have to disconnect/reconnect that computer?
    Do I have to disconnect every other computer and then connect each one again with the updated settings?
    Will the change in security settings affect my print server?  If so, do I have to set it up from scratch in ELA?
    For the record, I have a WRT-300N and the print server is a 54g.
    Anyone who reads this may also want to look into recent news.  May not be a big deal, but a vulnerability of WPA/TKIP has been identified.
    Thanks in advance to anyone who answers.
    Solved!
    Go to Solution.

    Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my  network and none were available. Does that matter?
    The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
    So now I have an unsecured network. Am I vulnerable to attack?
    Which leads me to my real question How do I change the security settings?
    Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
    Thanks,for any help
    Phil

  • NW04s: How to change column settings like 'do not adjust' 'fit to resuts' e

    In the new Analyzer, old report format: how to change column settings: do not adjust, fit to results, etc.?
    Regards
    -Bala

    Hello,
    In the properties dialog of the Grid and some other items, there is a checkbox by name "Autofit". When this is checked, the result columns are expanded to correct data widths.
    Regards,
    Manjunath

  • HT4009 I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    Hi Dave_warr,
    I would suggest restarting the iPad and see if the download resumes.
    iTunes: How to resume interrupted iTunes Store downloads
    Resuming downloads from an iOS device
    From the Home screen, tap the iTunes icon.
    For iPhone/iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password.
    Click the "OK" button.
    Click the Resume or Resume All button to start the download.
    If you don't see the application to download it, then follow these troubleshooting steps:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If the app does not appear in your list of purchases, then contact the iTunes Store for help:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    I hope this information helps ....
    Have a great day!
    - Judy

  • How to change screen settings

    Hi
    I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
    I m using the version 4.5b.
    Thanks & Regards
    Ravindra

    Hi,
      refer u may get an idea.
    https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
    Regards

  • Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

    my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

    To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
    http://support.apple.com/kb/HT1766

  • How to change the Settings in the Graphic structure. T Code CN41

    Hi,
    How to change the Settings in the Graphic structure. T Code CN41
    Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
    Pls advise me.
    Thanks in Advance.
    Raju

    Hi,
    Thanks for the reply. But please clarify a bit. Please below is my requirement.
    As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
    Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days.  I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
    Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
    Regards
    Raju

  • How to change Preset settings (CS4)

    Hello everyone,
    I'm going to make a video with Adobe Premiere CS4 and I need to know how to change Preset settings or however it is called, because I think none of the Presets match with my videos (tried some and my videos were bigger or smaller).
    My videos are .mov, 800x600, made and rendered in Autodesk 3ds Studio Max 2010 (3D Program).
    Could someone please help me? I don't know if there's a preset for me or if I have to change settings or something like that (and where). Yes, I'm new! I'm from Spain if you need it.
    Feel free to ask anything you need, of course.
    Thanks in advance,
    Marta

    Marta,
    Welcome to the forum.
    In CS4 and CS5, one can set the Preset at the Sequence level. Before, it was more global, at the Project level.
    In Sequence New, you will choose the Desktop Preset, and then you can alter almost every displayed attribute, such as Frame Size, or Frame Rate, etc. you want to match your Sequence to your source footage 100%. After editing with those attributes matching, you can then Export to a desired output setting with AME (Adobe Media Encoder). You choice of Desktop, allows you to customize the settings to match. I wish that Adobe had named it "Custom," as the term "Desktop" is a bit abstract, though it has been around for a very long time.
    Good luck, and do match your Sequence settings (Desktop) to your source footage.
    Hunt

  • HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

  • How to change security codes when you forget them

    How to change security codes when you forget them?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (115681)

  • HT1918 how to change country/region when i have credit balance on account?

    how to change country/region when i have credit balance on account?

    You need to spend the balance or ask the iTunes Store staff to remove it.
    (67937)

Maybe you are looking for