How to change browser tab text?

When I open (view) my WebHelp project, the title is not
correct. It is using an "old" title from a previous project that
this one was created from. I changed the title on the Properties
dialog box in the actual RoboHelp project, under Project Settings
--> New Window --> Window Caption to the correct new text --
but this does not seem to affect the WebHelp browser tab title.
(yes, I saved the project, regenerated web help, even tried
shutting down RH then regenerating WebHelp again -- no effect).
I did not see a tab title option in the various property
choices offered during WebHelp generation. Where is it getting this
tab title from, and how can I change it?

Try Project Settings.

Similar Messages

  • How to change the default text title of Detached table/treetable

    Hi,
    Is anybody know How to change the default text title of Detached table/treetable.
    I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
    as per this post It will change the title throughout the application.
    I wanted to change only for one particular table.
    Thanks,
    Charu
    Edited by: Charu on Sep 13, 2012 4:14 AM

    Hi,
    please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
    Frank

  • How to change a TAB dynamically to be the active tab?

    Hi,
    I have a portlet written in Java and registered using a web provider. This portlet exposes a link which drives the content of another portlet through parameters&events.
    This other portlet is placed on the same page but on a different TAB (!).
    What I want is, when clicked on the link in Portlet1, this changes the content of the Portlet2 (via an event and parameter - that works) AND should change the TAB, so that the TAB which contains the Portlet2 is active and shown.
    I couldn't figure out, how to change the TAB with an event or any other way. I can easily change the page through an event, but not to a tab on the same page. Do I overlook something or can I just don't use events for this?
    Is there any API function which does changing tabs or getting the tab id or is there any other programmatic workaround to do dynamic tab changing?
    If so, can someone point me to a code fragment?
    Any help would be much appreciated.
    Cheers,
    Erik

    A work around may be to change the location.href to the url of the tab you want to switch to.
    Have you tried that already?

  • How to change the tabbing order of an array of clusters?

    How to change the tabbing order of an array of clusters?  I have the cluster arranged in table in the front panel.   The cluster element goes horizontal and array element goes vertically.   When I press the tab key, the cursor goes to the next array element instead of the next cluster item (down instead across).
    Solved!
    Go to Solution.

    Broken Arrow wrote:
    Harold asked a perfectly reasonable and necessary question, but how is that a Solution ???
    I believe it is called the Socratic Method.
    Sea-Story time
    I had the privledge of working for Ron Davis when he managed the Allegheny District of DEC. He was an ex-WO4 (Highest possilbe rank for non-commisioned officer in US Navy, required act of congress to confirm).
    Ron never answered any question I ever saw presented to him. I remember a group of managers in a frenzy over some issue  running to him to to see what he thought. He asked them a series of questions that lead them to the solution and soon they were smiling and slapping each other on the back as they walked away.
    Who is that has a signature that read "it is the questions that guide us"?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to change the Short text of a GUI Status .

    Hi Guys ,
       Can any one guide me on how to change the short text of an already existing GUI Status .
    I have already tried doing these :Opened the GUI Status in change mode and changed the short texts of the Application tool bar ,
                               Menu Bar ,
                               Function Keys ,
    thinking that this will update in the Short text .. but that didnt happen ...
    Below is what I need ...
    Requirement :
    GUI Status : Status_001 .
    Short Text :  New GUI Status .
    Change the Short Text to " Changed GUI Status ' . 
    Regards,
    Ranjita

    Hi Ranjita,
    Do this...
    go to SE80
    Open the program.. open node GUI Status
    Double click on the status you want to change
    go to menu GOTO>ATTRIBUTES>STATUS
    click on continue or simply enter
    Here change the short text and continue or enter
    activate it
    Hope this helps..
    Regards,
    Kinshuk

  • How to change format of text in ticker view?

    Hi all,
    How to change format of text in ticker view?
    Thanks

    Hi,
    If you want to format the entire ticker with particular format then put in the Beginning text
    before Table tag
    put the font tag with needed attributes
    <Font> <table....>
    In the end text after table tag
    <table> close the font tag
    Thanks,
    Vino
    Edited by: Vinodh NK on Mar 18, 2010 4:36 AM
    Edited by: Vinodh NK on Mar 18, 2010 4:36 AM

  • How to change color of text is value is equal to 0

    how to change color of text or background if value is equal to 0

    HI,
    In Template Builder,Insert the conditional region,there you select the column and give condition is equal to 0 and in advanced enter the following code
    <?if:XMLfield=0?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?>
    try this it works.
    Regards
    Uday

  • How to change the menu text for menu exit in Version 3.1i

    Hi,
    I am working on an enhancment in CJ02 transaction in 3.1i version. I have implimented menu exit for it , but I am unable to change the menu text for it.Please let me know how to change the menu text for that menu.
    Thanks
    Suman

    Hi Shree,
    Thanks for the response. Please find the Enhancement name here "CNEX0006".
    Thanks
    Suman

  • How to change the tab on a web browser

        Hello,
    I do not know how to change the (index.html) tab. When you have several of the tab on your browser open, the name appears in the middle of tab, mine continues to say the INDEX.html. I just need to know how to go into dreamweaver and change the title tag. In the actual HTML I have changed it and it still hasn't worked. please help, thanks!

    Oh I see. You also posted another question about the page not working on mobile devices
    http://forums.adobe.com/thread/1342179
    The page name in the browser tab comes from the text inside the <title> tag.
    Line 5: <title>INDEX.html</title>

  • How to change the default text style?

    The MacOS system seems to maintain a collection of text 'styles' available in applications such as TextEdit, Bean, MacJournal, Notebook and DevonThink. This collection contains a default style, used by some (but not all) of these applications as the default text style for new documents.
    At my computers this default style is characterized in the 'favorite styles' panel as 'left aligned, spacing 0.0x' and it has strange tab stops (0.99, 1.98, 2.96, 3.95, 4.94, 5.93, 6.91, 7.90, 8.89, 9.89, 10.86, 11.85 cm).
    I prefer tab stops at 1.00, 2.00, 3.00 etc., and 1.2x line spacing.
    I guess I have changed the default style by accident, as I cannot imagine Apple putting such strange tab stops in a default style (0.0x spacing sounds a bit strange too). If so, it must somehow be possible to change the default style.
    I have tried to change the default style via TextEdit (which does not use the default style as default, but spacing 1.0x and tab stop at each centimeter) and several other applications (Bean, MacJournal, Notebook) in the following way: select a piece of text with the intended format, open the document styles panel, click 'Add to Favorites', enter 'Default' as the name for the style and click 'Replace'. Unfortunately, that doesn't work. Although I do not get an error message, the Default style hasn't changed. I can save my preferred style as, for example, 'Preferred' but that does not prevent MacJournal and other applications from using Default for every new document.
    Any idea how to change this default style, or, if that is not possible, reset it to its original state?

    I suggest you have a look at [https://addons.mozilla.org/en-US/thunderbird/addon/stationery/?src=api Stationery].
    It won't help you in defining styles, as such, but will give you templates wherein you can set up styles.

  • How to change browser title!?!

    Does anybody know how to change the browser title?!
    Using Dreamweaver 8 on a Mac.
    www.myvirtuemagazine.com on my site it is called "demo" how
    can I change this?
    Also does anybody know how to create a little logo in the URL
    bar at the start of the URL like Adobe has the signature red A and
    Google has the G, how do you create that!?

    In the <head> of your document --
    <title>This is the text that appears as the browser
    title</title>
    As for the icon:
    http://alt-web.com/favicons.shtml
    Virginia Carter
    Carolina Web Creations
    ======================
    www.carolinawebcreations.biz
    Alix86 wrote:
    > Does anybody know how to change the browser title?!
    >
    > Using Dreamweaver 8 on a Mac.
    >
    > www.myvirtuemagazine.com on my site it is called "demo"
    how can I change this?
    >
    > Also does anybody know how to create a little logo in
    the URL bar at the start
    > of the URL like Adobe has the signature red A and Google
    has the G, how do you
    > create that!?
    >
    >

  • How to change the default text "There are no items to show in this view" in the visual webpart

    Hi,
    I am using a visual webpart and in that if there are no items in the list it is showing the default text "There are no items to show in this view." I want to change this default text. 
    I checked the forums here there are multiple ways are shown but no one is working for me.
    Kindly help me to change this text.
    Thanks in advanced.

    It seems you're retrieving items inside a specific you.. why not having a <div> inside you're visual web part and check to see if the count of items retrieved is > 0 then insert that in the div, otherwise, insert your custom message and not rendering
    the web part itself. What you're describing is the default message from SharePoint which comes from default views, and this can be changed from xslt in SP 2010 or in JSLink in SP 2013, here's a link how to do so in JSLink :
    http://www.idubbs.com/blog/2015/jslink-csr-to-override-there-are-no-items-to-show-in-this-view/ .
    But as said, since you're doing a visual web part, keep your stuff in the visual web part and check for the count of items before adding the rendered data to your div.  
    Mohamed Derhalli
    SharePoint Consultant
    Blog: SharePoint Thoughts
       Twitter:
    LinkedIn:
      

  • How to change a labels text which created at runtime?

    hi,
    i am creating label controls in runtime dynamically and adding them to a group component. this group component is in another custom component and i have lots of custom comp. in my app.
    my question is how can access (via id) and change a labels text whict created at runtime?
    i can change like this but i am setting id's and want to reach via id.
    var lbl:mx.controls.Label = mx.controls.Label(subMenu5.group_subMenu5.getElementAt(1));
    lbl.text = "good job";
    thank you, have a good day.

    First off, if you are already using a Spark Group, I would suggest you use a Spark Label instead of an MX Label. If you want to reference the Labels from the group, loop through the group's elements and check the if the element id matches the Label you want to assign text to.
    var lbl:Label;
    var n:int = myGroup.numElements;
    for (var i:int = 0; i < n; i++)
         lbl = myGroup.getElementAt(i) as Label;
         if (lbl && lbl.id == "myLabel")
              lbl.text = "newText";

  • IN OBIEE How to change Writeback input text field into textarea?

    HI,
    I've got writeback working, OBIEE 10.1.3.3, but I want a 255 character in that writeback text field with word wrapping. because we Can't see to get input
    type text to wrap, is it possible to change input type="text" to input type="textarea" for a writeback column?
    I tried to included Html with javascript code in Writeback column properties under CSS custom option.it's also not working
    HTML code:
    <html>
    <head>
    <SCRIPT LANGUAGE="JAVASCRIPT">
    function expandTextArea(textarealabel,e)
    if((textarealabel.textLength %45==0)&(textarealabel.textLength>1))
    if(e.which==8)textarealabel.rows=textarealabel.rows-1;elsetextarealabel.rows=textarealabel.rows+1;
    </SCRIPT>
    </head>
    <body>
    <FORM NAME="Workbook2" ACTION=" " METHOD="">
    <TEXTAREA ID ="Text1" COLS="20" ROWS="2" style="overflow:visible" ONKEYDOWN="expandTextArea this,event);">
    </TEXTAREA>
    </FORM>
    </body>
    <f/html>
    If you have any idea share with me ASAP.
    Edited by: devarasu on Feb 23, 2011 6:57 PM

    Hi thanks for your quick response,
    1) i have cheked you link there is no word Wrapping output, I want to view my writeback filed morethan one line ,is there any way to set instead Horizondal and vertical bar in that writeback filed. like Auto extending TestArea (it have Scrolling bar).
    2) Onemore thing also required,once i gave maximum length of WriteBack field 255 characters. but is not controlling it's allowing morethan 255 characters.kindly tell me how to control the lenth of the writeback field .
    Note: I am using SQL server DB,in DB and BI Answres writeback column properties i given 255 characters only but it's allowing morethan 255 characters.
    once again thanks to you.kindly help me on this ASAP.
    Thanks and Regards,
    Devarasu.R

  • How to change the answer text within the review widget of iBooks Author?

    I want to change the answer text which appears after one has finished a test within the review widget of iBooks Author, but I can't figuere out how to do that.
    I also want to sum up the result of a couple of questions as a percentage. How does that work?
    Can anybody help?
    Thanks
    Reinhard

    Notice the answers inside the widget, each with a circle to the left - tap on one of those, which will then appear green with a checkmark in the center to indicate the correct choice.

Maybe you are looking for