How to change camera preset?

When you add a camera layer, it brings it into the composition with the 50mm preset. How can I change this to the 35mm preset? It looks like the CameraLayer object has a method called applyPreset(), but it requires an ExtendScript File object that for the file that contains the preset.

Hi
Actually, I used MAX only to capture the image and I have used a software SpectralCube to change the exposure time of maximum frame rate. This software also uses labview to change exposure time, so there should be some way to do it in labview. I have attached the snapshot of spectralcube and the labview file I used.
Thanks
Regards,
Sidd
Attachments:
Labview.pdf ‏17 KB
Spectral.pdf ‏51 KB

Similar Messages

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys?

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys an see at the same time the changes on the photo?
It worked under Windows, now I use OS 10.8 and have to apply a preset with a click or Return button but after that the pop-up menu close so I have to open it once again to change a preset. Please help. Thank you!

The filter panel is a shortcut for the content panel and it only effects the content of that window. So if you have a folder it will only see this as a folder and not with its content. (a Stack behaves about the same, being different in only counting the first file in the filter panel criteria but not what is in the stack itself)
You have a view work arounds, first is use menu view / show items from subfolders (this can take some time especially if you have not used caching before on this content) and this builds visible thumbs for all content and that can be used for filtering.
Or use the find command (Edit / find) and inhere specify the source and fill in the criteria include subfolders and this will give you the correct result.
When you create a smart collection the find command also pops up given you the same opportunity to get the results in a collection, but since a collection is only a bunch of aliases referring to the originals you might be a bit careful with editing and deleting.

How to change Camera settings while NetStream is published with H264 codec

Hi,
when I'm using H264 codec I can't modify my cam.setMode(w,h, fps) because my stream hangs (second call to cam.setMode() uhangs video. When I'm using Sorenson codec that same code works fine.
So my question is how can I change Camera settings when I'm publishing images from this camera with NetStream encoded with H264. I'm using Flash Player 11,3,300,270 Windows 7 64 bit ActiveX.
Swf compiled to target Flash Player 11.3, swf-version=16.
Regards

Try to unpublish/pause publishing just before setting the things on camera and resume/publish again after the settings are applied.
C

IPad, how to change camera in face time

Can someone tell me where and how I change the camera, in FaceTime, from facing me to facing away from me
Thank you for your help
Ingolf in Alice Springs Central Australia

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

How to change camera applied Metadata - Camera Model.

I have 1000's of imported scanned film images in my Aperture library. The camera model metatag reads Nikon Cool Scan (name of scanner I used). How can go in and edit this this tag to change to actual camera model used to take photo? I'd like to do a batch change of the metatag - but this one is not available to change. Any ideas?

A little application called PhotoInfo by Jim Merkel claims to edit such EXIF data, but I have not had success with it making changes stick for creation dates. I am in the same boat with scans, but don't want to record camera data in the scanned file (I find it helpful to know the device that produced the actual image). I want to change the creation date to the picture's creation, rather than the digital rendition of it.
Regardless, look into PhotoInfo and the batch change options it has.

How to change computer presets

How do you change presets on an iMac computer? My distinct issue is, when going to print, there is no greyed out option for two-sided printing. This is present on my iPhone and MacAir, but not present on my iMac. Please advise.

there is no greyed out option for two-sided printing.
Check w/your printer manufacturer. You need to confirm if the option is compatible w/Mavericks.

How to change the preset parameters in my sound fonts mana

I don't know how to do it in my computer but I have seen other computers that can.

That's the exact question I was about to ask. I think the answer if you have an X-fi is you can't. Audigy had an edit preset option.
Here is a picture of it.
http://www.xbitlabs.com/images/multi...digy2/bank.gif
I'm sure it will return to a grateful world at some point.
You can't edit the parameters with midi either, so you're completely snookered
Message Edited by eric44 on <SPAN class=date_text>2--2005 <SPAN class=time_text>09:25 AM
Message Edited by eric44 on 2--2005 09:26 AM

How to change camera angles frequently (Like in music videos)

Hey I'm trying to make a music video of my own and I have 6 video clips of a shot of the band, guitarists, bass, singer, and drums and I want to know if there is any way you can like set a priority to what video is being shown so you dont have to chop up each clip and you can just keep them all whole but just set something so that one clip is the only clip being shown at that time and then switch every 3 seconds or so. Please help if there is any tool that does this.

Look up mulitcam editing in the PPro docs.
Basically: First, create a "source" sequence. Each video feed on it's own layer in the timeline. Sync them as required.
Next, create a new "multicam" sequence. Nest your source sequence into the multicam sequence by dragging the source sequence icon from the Project panel into the multicam timeline. Enable multicam editing on this sequence. Notice that this nested squence shows you exactly one video feed. This is normal, not to worry, all will be clear soon.
Now, open the multicam editing monitor. You'll see all of your different camera angles on the left hand side, and the "current" angle on the right hand side -- this corresponds to the camera angle on the left hand side with the highlight around it. Use your pointing device to select which angle is active. Start your video playing. As it plays, use your pointing device to pick which angle to show at any particular time by clicking on a camera angle on the left hand side of the multicam monitor. Be quick, this is real-time work. When you stop, you'll see the cuts made on your timeline. Each cut is identified by camera number, which corresponds to the video track number of your source sequence.
Finally, go back through your timeline to each cut, and use the rolling edit tool to move that cut back and forth to fine tune the location of each camera angle change. You can do this as often as you need to.
It sounds complicated, but in practice it's simple and quick.

TS4436 how to change camera effects

picture looks like a negative picture

Sure just don't have invert colours set to ON in settings/general/accessibility because there is no camera setting I know of to take negative pics unless of course you have an app doing that for you

CAMERA ON STANDBY & DO NOT KNOW HOW TO CHANGE IT

CAMERA ON STANDBY & DO NOT KNOW HOW TO CHANGE IT?
Since the phone has come back from repair I can not use the camera feature, I have no idea how to remove "Camera on standby"
Regards
John

They always perform a software update after a repair, but it sounds like in your case something went wrong here.
You don't say what kind of phone you have. If it is an S60 "Symbian" model, you can reformat it with the code *#7370#; if the phone is compatible with NSU (www.nokia.com/softwareupdate) you could reinstall the latest software yourself using your PC.
Failing both of those, you would have to go back to the repairer and tell them a new problem has been caused by the work they did.
Message Edited by mccbleue on 23-Feb-2009 07:57 PM

HT204053 Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

How to change the parameters(rot x,y,z &dictance) to get Kinect Fusion Explore Multi Static Cameras sample work?

Recently,I start to pay attention to the function 'Kinect Fusion Explore Multi Static Cameras sample' In SDK 1.8.
Here ,I use two kinects ,but I have no idea how to change the parameters(x,y,z &dictance) in the red rectangle to make it work successfully.
By the way,I hava calibrated the two kinects' camera and get the related perameters.

sorry，I can't add the image to my question...~~~~(>_<)~~~~

How to change Preset settings (CS4)

Hello everyone,
I'm going to make a video with Adobe Premiere CS4 and I need to know how to change Preset settings or however it is called, because I think none of the Presets match with my videos (tried some and my videos were bigger or smaller).
My videos are .mov, 800x600, made and rendered in Autodesk 3ds Studio Max 2010 (3D Program).
Could someone please help me? I don't know if there's a preset for me or if I have to change settings or something like that (and where). Yes, I'm new! I'm from Spain if you need it.
Feel free to ask anything you need, of course.
Thanks in advance,
Marta

Marta,
Welcome to the forum.
In CS4 and CS5, one can set the Preset at the Sequence level. Before, it was more global, at the Project level.
In Sequence New, you will choose the Desktop Preset, and then you can alter almost every displayed attribute, such as Frame Size, or Frame Rate, etc. you want to match your Sequence to your source footage 100%. After editing with those attributes matching, you can then Export to a desired output setting with AME (Adobe Media Encoder). You choice of Desktop, allows you to customize the settings to match. I wish that Adobe had named it "Custom," as the term "Desktop" is a bit abstract, though it has been around for a very long time.
Good luck, and do match your Sequence settings (Desktop) to your source footage.
Hunt

How to change presets for Photos 1024 X 768 Premiere 11

How can I change the presets on Premiere 11 to work with Photos 1024 X 768 or 2592 x 1944 or 3648 x 2736. I want to use Premiere but I take more photos than video.

jrodriguez6
For your consideration....
If you have Premiere Elements 11 in Windows 7, 8, or 8.1 64 bit (and depending on overall system resources)....assuming a NTSC setup....
a. Set the Premiere Elements 11 project preset manually
File Menu/New/Project
NTSC
DSLR
1080p
DSLR 1080p30 @ 29.97
before you close out of that area, make sure that you have a check mark next to "Force Selected Project Setting on This Project".
b. In the Premiere Elements 11 Expert workspace/ Edit Menu/Preferences/General remove any check mark next to "Default Scale To Frame Size". Import the photos into the project via Add Media/Files and Folders/Project Assets from where you drag the photos to the Timeline.
c. From the Timeline, scale each (Constrain Proportions checked in Applied Effects Tab/Applied Effects Palette/Motion Panel expanded and its Scale property) so that the images fill the space in the monitor provided by the project preset.
d. Publish+Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
What does that look like?
Further details on the above to come along with any clarification requested.
Thank you.
ATR
Add On...Done as suggested will leave no black borders.

How to change quality and size for a Nokia 920 cam...

My Nokia 920 is now 2 weeks old and I'm totally bummed that I cant get a strait answer to this simple question.... How to change the quality-size setting to the camera... The camera is advertised as a 8.7... It's default size is NO way that.... Nor do I want to take default size photos ALL the time.. Any help would be appreciated.
Solved!
Go to Solution.

It takes photos in this modeif your looking at them from skydrive you can change the size by going to Settings, backup, photos.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to change camera preset?

Similar Messages

Maybe you are looking for