How to change capture time?

I had wrong year setting om my camera. Now all shots are 2010 and not in 2012. I tried to change them including check the write settings into raw-files.
The creation date are still 2010 and wrong, when I look at files in the finder.
second: how to move the pictures from the wrong 2010 folder to the 2012?
Thanks for any help of this very difficult and irritating issue.

This link directly takes you through step by step directions:
http://help.adobe.com/en_US/lightroom/using/WS57264460-DC72-4a1f-A665-1E90907A9FFD.html
With one or more photos selected in the Grid view, or with a single photo selected in the Filmstrip in Loupe, Compare, or Survey view, do one of the following:
Choose Metadata > Edit Capture Time.
In the Metadata panel with EXIF information displayed, click the arrow in the Date Time field.
In the Edit Capture Time dialog box, select the type of adjustment:
Adjust To A Specified Date And Time Changes the capture time to the date and time you specify.
Shift By Set Number Of Hours (Time Zone Adjust) Changes the capture time by the number of hours you add to or subtract from the original time.
Change To File Creation Date For Each Image Changes the capture time in the camera EXIF data to the file creation date. If you select this option, skip step 3.
In the New Time area of the dialog box, do one of the following:
If you selected Adjust To A Specified Date And Time, type a new date and time in the Corrected Time text box. You can also select the date and time values and then use the Up or Down Arrow buttons to increase or decrease the values.
If you selected Shift By Set Number Of Hours, choose a value from the pop-up menu to adjust the time forward or back.
Important: If more than one photo is selected in the Grid view, Lightroom changes the capture time for the active photo by the specified adjustment. (The active photo is previewed in the Edit Capture Time dialog box.) Other photos in the selection are adjusted by the same amount of time. If more than one photo is selected in the Filmstrip in Loupe, Compare, or Survey view, the capture time is changed only on the active photo.
(Optional) To revert the capture time back to the original, select the photos in the Grid view or the Filmstrip and choose Metadata > Revert Capture Time To Original.
-janelle

Similar Messages

How to change "capture time" of multiple photos to a specific time?

Hi guys,
For some reason I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata.
But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
What should I do?
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I would greatly appreciate your help.

softcotton24 wrote:
That's why I posted this.
Sorry - I didn't see where you'd mentioned that you'd chosen the correct option, so I thought best to rule that out first.
Anyway, it sounds like a bug, which can be reported here:
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om
In the mean time, you can use exiftool, or try your luck with the exif-write function of the exif-meta plugin, e.g.:
Note: if you use exiftool, you need to save metadata first, make the change, then read metadata in Lightroom, otherwise capture-time changes will be ignored by Lr.
Cheers,
Rob

Change capture time of many shots decrement of some minutes...

Hi to all,
I've a proble that drive me crazy.
I've 3 cameras and operators (2 x D700, 1 x D300) and in a wedding session they missed to
synchronize camera's timers, so when D700.a sign 10.53am D700.b sign 10.27 and D300 sign 9.43.
At this point I would like to Syncronize captured time using LR3 feature so every camera shift time
of right values. D700.b -25minutes, D300 -1h10minuts.
How I can obtain that ?
Thank you very much...
PS: the shots are almost 4500 so a manual change of each one is impossible to do...

The edit capture time dialog in LR is somewhat missleading, as you could think that you would set the capture time for all selected photos to the same absolute time when choosing "Adjust to a specified date and time". But then, who would want to do this ...
So LR shows you the original capture time of the most selected image, and adjusts all the selected images by the difference of the original and the changed capture time of the most selected photo.
Beat Gossweiler
Switzerland
Message was edited by: b_gossweiler

How to change system time through java program

Hi
I want to know, how to change system time through java program.
give me a idia with example.
Thanks

There isn't any core Java API for this. Use JNI or call an external process with Runtime.exec().
~

How to change system time on Cisco MeetingPlace Express Server

How to change system time on Cisco MeetingPlace Express Server
Model MCS-7825-I4

Hi Vijay,
As per the install guide for MPX 1.x as well as 2.x "Caution! Be sure you enter the correct date and time. You must reinstall the Cisco Unified MeetingPlace Express operating system and application if you need to change the date or time of your server in the future."
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express,_Release_2.x_--_Configuring_the_Cisco_Unified_MeetingPlace_Express_Server#Configuring_the_Cisco_Unified_MeetingPlace_Express_Server
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/meetingplace_express/1_2/english/installation/guide/iug/mpxinst3.html
HTH
Manish

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

How to change LACPDU timer setting on Microsoft Network Adapter Multiplexor Driver

We’re installing our first Windows 2012 R2 server, and one of the network settings is different from what’s on a comparable Windows 2008 R2 server, and it's not what our network group would like to see connected to their switches. Both servers have
2 NICs teamed using the LACP protocol and are connected to 2 different switches for high availability. In both cases I just teamed the NICs with whatever driver was on the server.
On the 2008 R2 server (the one our network group likes), it’s an Intel driver, “Intel(R) Advanced Network Services Virtual Adapter”. On the 2012 R2 server it’s a Microsoft driver, “Microsoft Network Adapter Multiplexor Driver”. The setting that
our network group is concerned about is the LACPDU timer setting. Apparently it can be either “fast” or “slow”. What they see on the switches is that on the 2008 Intel driver NICs the setting is “slow” and on the 2012 Microsoft driver NICs the
setting is “fast”. The switches are expecting “slow”.
I spent some time searching on Microsoft.com and other places, as well as poking around on the server, but I couldn’t find that setting or how to change it on the Microsoft Network Adapter Multiplexor Driver. Does anyone know how I can change it?
Thanks!

Hi,
According to my knowledge, we can’t change the value of LACP timer.
Here is a related question,
How to change LACP timer-value on Windows server 2012 Network Teaming, from short to long?
http://social.technet.microsoft.com/Forums/en-US/05e2761f-e165-44f6-9bed-d91e9eeba687/how-to-change-lacp-timervalue-on-on-windows-server-2012-network-teaming-from-short-to-long
Hope this helps.
Steven Lee
TechNet Community Support

How to change the Time Zone in OAM log & audit files

Hi All,
I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
Could any one please tell me how to change the Time according to the place ?
It is an urgent plzzz.
Thanks & Regards,
Vaasu.

could you find how to change the tine zone. i am also getting this problem
thanks

HT1386 How to change fist time sync specifications (change back from icloud to outlook?

How to change fist time sync specifications for calendar (change back from icloud to outlook?

Go to icloud.com on your computer, sign into your iCloud account, click Calendars. Are your events still there? Also, what version of OS X are you running on your mac and what version of iOS are you running on your phone?

How to change the time ??

Hello guys,
I would like to know how to change the time in a 7970G cisco phone, I dont know if the phone gets the date from a server, but checking typing this command: show clock in the CME UC520, date and time shows correct , I powered off / powered on the phone and it remains with the same Wrong time (just time no date), any adivce would be very well received. Thanks!

Hi Gerardo,
Complete these steps on the Cisco CallManager Express in order to display the correct time:
Configure the type 7970 command under the ephone.
ephone 1
device-security-mode none
mac-address 0017.59E7.492C
type 7970
button 1:1
Configure the time-zone command under the Telephony service.
telephony-service
max-ephones 5
max-dn 5
ip source-address 10.1.0.1 port 2000
auto assign 1 to 5
time-zone 8
dialplan-pattern 1 ... extension-length 4 extension-pattern 9000
voicemail 6000
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 05 2009 12:44:03
Configure the create cnf-files command under the Telephony service in order to implement the change in step 1 and 2.
CME-CUE(config-telephony)#create cnf-files
CNF file creation is already On
Updating CNF files
CNF files update complete
Verify
Comlete these steps in order to reset the Cisco 7970 IP Phone:
Press the Settings button on the Cisco 7970 IP Phone.
Enter the **#** key sequence on the phone keypad in order to reset the phone.
The correct time displays on the Cisco 7970 IP Phone after the reset.
Troubleshoot
Complete these steps if the time displayed on the Cisco 7970 IP Phone is incorrect:
Verify the phone configuration on Cisco CallManager Express.
Display the 7970 configuration file on Cisco CallManager Express. The name of the file is xmldefault7970.cnf.xml, which is located in the system:/its/ directory. Complete these steps in order to display the configuration file:
Log in to Cisco CallManager Express.
Complete these steps in order to display the 7970 configuration file:
Issue the cd system: command.
Issue the cd its command.
Issue the more xmldefault7970.cnf.xml command in order to dump the configuration.
Verify that the time zone parameter is correctly configured . The output of the command is shown here:
CME-CUE#more xmldefault7970.cnf.xml
M/D/YA
Greenwich Standard Time
2000
10.1.0.1
{7970 Feb 05 2009 12:31:07}
2
English_United_States
en
United_States
United_States
0
http://10.1.0.1:80/localdirectory
Complete these steps in order to verify that Cisco CallManager Express successfully sends the 7970 configuration file to the Cisco 7970 IP Phone:
Log in to Cisco CallManager Express.
Issue the debug tftp events command.
Issue the terminal monitor command.
Reset the Cisco 7970 IP Phone.
This output shows the results of the debug tftp events command. The bold text indicates the phone has successfully received its configuration file.
Feb 5 12:38:21.539: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 0, size
1033 for process 287
Feb 5 12:38:21.543: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:
00:00 for process 287
Feb 5 12:38:24.383: %IPPHONE-6-REG_ALARM: 20: Name=SEP001759E7492C Load= SCCP70
.8-3-2S Last=Phone-Keypad
Feb 5 12:38:24.427: %IPPHONE-6-REGISTER: ephone-1:SEP001759E7492C IP:10.1.0.4 S
ocket:1 DeviceType:Phone has
registered.
Regards,
Justin

How to Change Capture YEAR with Edit Capture Time – Mac OS 10.6

Hello,
I have very frustrating problem with Lightroom 2 (latest version). I have read that it is possible to fully edit the capture time and, crucially, year of a set of photos. Unfortunately, unlike all the FAQs I've read, I have no option to change the year:
FAQ screenshot:
My dialogue box:
There is no year option I can see, only month, day of month and time.
Please help me.
EGP.

I got the correct answer. Included here for posterity.
Well, it's not the file. The file's showing the right settings on mine.
If you look in the Metadata panel, do the dates appear correct there?
And, really odd question of the day... if you go into system preferences > language and text > formats, have you customised any of the formats? I just have a really vague recollection that it had an effect once upon a time.
Yahaw!!! That's the answer!
I had a custom time set up on my computer. When I was on Leopard you had to edit the date formats to allow the clock that shows in the top right of the menu bar to use the format "weekday/dayofmonth/month/time". That must have been it
Thanks a bunch!!

Can I change Capture time/date globally

I have shots from a trip done with two different cameras, however the time stamps are different by one day and one hour. I would like to globally change the creation date and time on one of the cameras in the Metadata, or perhaps change one and sync with the others. I don't see how this is possible, but maybe there is another program that can do this.
thanks, kb

The Metadata > Edit Capture Time command can adjust a set of photos by the same amount of time:
1. Use the Library Filter bar to search for all the photos taken with just one of the cameras, by filtering in the Metadata browser for Camera or Camera Serial Number.
2. Make sure you're sorting photos by Capture Time (down in the tool bar, View > Tool Bar). Select all the photos from the trip.
3. Do MetaData > Edit Capture Time.
4. Select Adjust To A Specified Date And Time.
5. The Original Time field will show the capture time of the most-selected photo. Change the Corrected Time by one day and one hour.
6. Click Change All -- this will change all of the selected photos by one day and one hour.

How to change capture date to unknown in Lightroom 5.2

How do I simply change a photo capture date to unknown in Lr 5.2? I scanned some photos that somehow automatically got the scanned date input as capture date and I need to reset it to unknown. I've spent way too much time searching for an answer for such a simple task. Any help would be appreciated.
Thanks,
Brian

LR doesn't provide a feature to change capture date to unknown, nor does it allow plugins to do it correctly. You'll have to use an external tool (e.g. the free Exiftool) to modify the metadata of the photos directly:
1. If you've added keywords, captions, or other metadata to the photos in your catalog, or you have applied Develop settings, then in LR, select all the affected photos and do Metadata > Save Metadata To File.
2. Use Exiftool to remove the fields EXIF:DateTimeOriginal, XMP:DateCreated, and IPTC:DateCreated and :TimeCreated.
3. Select all the photos and do Metadata > Read Metatadata From File.
The Capture Time To Exif plugin may make step 2 a little easier for you, though you'll have to figure the Exiftool command line arguments yourself.

How to change Refresh Time in a Discoverer Portlet?

Hi,
I have added a discoverer portlet to my main portal page. The minimum refresh time for the discoverer page i could set is 1 hour. Is there any way i could change it to 1 min as this is getting real time data in the database which i would like to display immediately.
Any help/suggestion is most welcome. Thanks in advance.
Regards
Goutam

Hi, i have the same problem.
i have searched both metalink and here but found nothing .. doesnt anybody know how to change the discoverer portlets refresh time interval anything other than 1 hour,1day,1week etc. (they are the only options available)
Any help would be appreciated.

42HL833B - How to change system time for Australia

I have a Toshiba 42HL833B that I brought back with me to Australia from the UK.
Everything works OK other than the system time still indicates UK time.
Australia does not come up as a Country option in setup so I have chosen "Other".
There does not appear to be anywhere where you can change the time.
Is it possible to change the time manually somehow?

I dont know if you have users manuals with you but you can download it from here .
Maybe you can find info how to do this.

How to change capture time?

Similar Messages

Maybe you are looking for