How to change cn attribute

How can I change 'cn' using Oracle Directory Manager?
The 'cn' attribute is normally grayed out, so cannot be changed.
Thanks,
Chetan

Hi Chetan:
What you are trying to do is modify the RDN (Relative Distinguished Name). The following is an example of how to change the RDN from "cn=dcp1" to "cn=thanh mai". The example assumes the entry to be changed resides under "dc=Americas, dc=IMC, dc=com"
ldapmoddn -p 389 -h host_name -D cn=orcladmin -w welcome -b "cn=dcp1, dc=Americas, dc=IMC, dc=com" -R "cn=thanh mai"
This modifies the RDN component of the DN from "cn=dcp1" to "cn=thanh mai"
Hope this helps.
Thanks,
Jay
null

Similar Messages

How to change general attribute of text element

hi
who now how to change general attribute of text element on screen dinamically? I wish to change text value dinamically for example.

Hi Denis,
I am not too sure on what you want.
If you require that the text value be different based on some conditions you can declare as many text elements as conditions and call the relevant text element.
But I dont think that you can assign dynamic texts to a single text element.
Regards,
Saurabh

How to change the attribute name for a relation

When the Data Modeler engineers a logical model into a relational model it create table columns for the relations. The names of the generated columns are listed in the attributes list in the properties dialog of the relation. The actual name of the attribute gets calculated by the attribute name of the entity which is part of the relation. This is okay, if there is only one relation between two entities. But when there are two relations between two entities the second attribute gets a stupid number suffix. This makes it impossible to give the attribute a useful semantic meaning.
When I engineer the model into a relational model I can change the column name in the relational model. Changing the column name in the relational model is not perfect but it would be okay for me, if it would not be overwritten during the next engineering run.
So I have two questions:
How can I change the attribute name in the attributes section of the properties dialog of a relation? See here for screen shot:
http://public.ceving.de/2012050300/relationattribute.png
And if it is not possible:
How can I preserve any changes on column names in the relational model during a re-engineering run?
Edited by: 931739 on 03.05.2012 08:07

Hi,
I've logged an Enhancement request on this.
I don't believe it's possible to change it from the Entity or Relationship dialog, as it's not updatable in these dialogs.
What you can do is change it in the Relational Model, and then reverse engineer the change back to the Logical Model.
David

How to change the attribut of Form in Review Form in ISR

Hi,
We have to change the attributes of text fields of form ( e.g disabling the text field ) once user hits the Review Form button on MSS page
Please let me know how to do it .
Thanks
Manish

Hi Manish,
You may write the Formcalc scripting for the respective field.
//Check ISR control parameters for read/write access
if($record.CONTROL_PARAM.ISR_MODE == "DISPLAY" |
 $record.CONTROL_PARAM.ISR_FORM_VIEW =="ISR_APPROVE" | $record.CONTROL_PARAM.ISR_REVIEW == "true" )
then
 this.access = "readOnly"
else
 this.access = ""
endif
Hope this helps.
Thanks and Regards,
Anto.

How to change the attributes of GUI CONTROLS in my own program.

hi all,
i just want to change the attributes of GUI CONTROLS in my own program.
for example `
How to set an ICON on my GUI BUTTON in the program?
so what's the mapping between CONTROL in the SCREEN PAINTER and variable in the program?

Hi Chao Liu,
Ya , u first find out the PF-STATUS of the screen and goto that status and now u can modify the ICON u want .
Finding the GUI status of the screen
Goto that TRANSACTION CODE or SCREEN
On the Standard Menu bar Goto ( Menu path) System --> Status
Now u get a pop-up System :status in that in SAP Data block u can find GUI Status. Now Double Click on that Status. It takes u to the Status of that screen.
Now click on the Display --> Change Button on the application tool bar.
If it is a standard GUI-status then it asks for the ACCESS KEY.
if it is a custom defined GUI Status then u can change the status .
reward if helpful
raam

How to change report attributes like heading, sort etc programmatically

Some of the columns from a classic reports using pl/sql as region source should be sortable. Is it possible to change this attribute (sort = yes) using JavaScript or APEX API?
David
Edited by: david on Sep 6, 2011 11:56 PM

There is something I don't understand here. Why do you need to point at the sxd? What is changing? Like I mentioned before. If the contents of the xsd change, all the report will do is - at best - drop the changed fields so you will be missing data. Perhaps some of the following will help;
[Crystal Reports Guide To ADO.NET|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20?quicklink=index&overridelayout=true]
[Crystal Reports For Visual Studio .NET Reporting Off ADO.NET Datasets|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2091d0c3-da1d-2b10-22be-a3426b183f75?quicklink=index&overridelayout=true]
[Crystal Reports For Visual Studio 2005 Walkthroughs|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23?quicklink=index&overridelayout=true] (page 332 on).
Ludek

How to change the attribute of screen field to drop down list dynamically

Hi All,
Col X                   Col Y
A                        input field
B                       drop down list
This is a tabular disply where the Screen field attribute for Col y is NO DROP DOWN BOX.
My requirement is to change the attribute of COl Y to DROP DOWN list depending on the value of
COL X dynamically.

Dear Ajay,
Actually this requirement is to enhance the standard screen for Tcode :EHSVU21.
So depending on the 1st Column(Test no) value ,i have to change the 3rd Column(Low.norm.result)
property either to DROP Down or not.
So in the PBO only the changes to be made and there is no field in SCREEN internal table for changing the attribute to DROP down. I checked SCREEN internal table where the field VALUE_HELP and REQUEST is useful but not suitable for my case.
Any solution available?

How to change the attributes of screen fields dynamically


well i have created a table by name empmaster_data with following fields.
*emp_id.
*emp_fname.
*emp_lname
*dob.
*doj.
*dept.
*desig.
now using a single screen i want to create,change and display the information.even i am using save and exit button.
now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

Hi,
Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
Hope This Info Helps YOU.
Reward Points If It Helps YOU.
Regards,
Raghav

Flex 3 - How to change an attribute name ?

like this
<item code="1" />
to
<item id="1" />
thanks

Hi Alex,
You can use setName to change the attribute name:
Here for example change all your id attributes with code:
var xmlTest:XML=<r><item id="1"/></r>;
for each (var node:XML in xmlTest.item.descendants("@id"))
node.setName("code");
trace(xmlTest);
Thanks,
Bhasker

How to change View Attribute Name?

Is there a way to change the attribute name of a view object that was added from and entity Object?
I dont want to change the Entity Attribute Name since i want to use it in diferent view objects with diferent names...

Hi Frank
It would be very convenient to have view object attribute name updateable because the attributes may result from different joins (to same table) and have different meaning depending more on the association than to the table attribute itself (in most case the relationship extend the meaning of the attribute).
In my use case i have :
A table FlexTypologyClassMatrix with two foreign key pointed to FlexTypologyClass primary table. That mean that my matrix have two axis defined by the primary key of FlexTypologyClass table.
I created a view object that correspond to this scheme with eo's FlexTypologyClassMatrix, FlexTypologyClass as FlexTypologyClassAxisX, FlexTypologyClassAxisY).
The view object attributes from eo's FlexTypologyClassMatrixAxisX or Y are generated from the table attribute name with a suffix like FlextypologyclassL (for FlexTypologyClassMatrixAxisX) and FlextypologyclassL1 (FlexTypologyClassMatrixAxisY).
The attribute name are the most used item used later in the development cycle and this is not easy to distinguish the X from the Y without analyzing the view object definition. It's not a very productive way to develop application.
It would be very convenient to permit the view object attribute name to be updateable or the alias name of the entity object in the view object has to be displayed with, every time.
I didn't check if the info is displayed every tiem, may be it is a workaround !?
Hope you understand what I mean. Thank you.

How to change the attributes of an XML file

hi peeps 'ope you can help me here i need to change the attributes of an xml file, i parse it first using a DOM parser but i cant find a way to change the attributes in the XML file, setAttribute() works only at runtime and doesn't change the attribute in the file itself. I can't find a method that will answer my question. I've searched through the forum and found similar threads....they say in order to write and change the attribute i must use the write() method of the XmlDocument class defined in com.sun.xml.tree.XmlDocument. But, i found another thread, and it says that com.sun.xml.tree.XmlDocument is not safe to use and i should use org.apache.crimson.tree.XmlDocument.....i can't find the XmlDocument class and the API for this package so i really dont know where to start...hope you guys can help me! thnx

thanks for responding roland....i already found the solution...i didn't use the XmlDocument class because i can't find any documents about it except for JAXP 1.0 here is my code snippet...i used the TransformerFactory and Transformer class to write
import org.w3c.dom.*;
import org.w3c.dom.traversal.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;
Document doc = null;
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
DocumentBuilder db = dbf.newDocumentBuilder();
dbf.setValidating(false);
doc = db.parse(fileGetFile); //this is the XML file
n1 = (Node)doc.getDocumentElement();
e1 = (Element) n1;
NodeList nodeList = doc.getElementsByTagName ("File");
//just insert whatever you want to do with the XML...parse it..set/change the attribute..etc....sample snippet below changes the attribute downloaded to "no"
for(int iWriteFailed = 0; iWriteFailed <nodeList.getLength() ; iWriteFailed ++){
n2 = nodeList.item(iWriteFailed);
e2 = (Element) n2;
e2.setAttribute("downloaded", "no");}
try{
TransformerFactory transformerFactory = TransformerFactory.newInstance();
Transformer transformer = transformerFactory.newTransformer();
transformer.transform(new DOMSource(doc), new StreamResult ( new FileOutputStream ( fileGetFile) ) );}
catch(Exception trans){}
thanks for responding and keeping the information interchange alive here in the forum...
Pau

How to Change an Attribute of A SET TYPE in SAP CRM

Hi ,
I have created an ATTRIBUTE through comm_attrset, and assigned it to a SET TYPE. Now I wanted to change the data type of this attribute. Its not allowing me to delete it, as its already assigned to teh SET TYPE. Moreover the set type is also not getting deleted as its assigned to a category ID.
Kindly let me know how can I change the attibute , if any one of you have come accross such situation.
Thanks
Asish
Edited by: Asish Dash on Sep 8, 2009 10:57 AM
Edited by: Asish Dash on Sep 8, 2009 10:58 AM

Hi Manish,
From my experience, you cannot change an existing attribute of a set type (esp. when it has a dependency).
You need to delete the attribute, save the changes and then re-create the attribute with new value table.
Also remove any dependencies before deleting the attribute.
Regards,
Vartika

HOW TO CHANGE LENGTH ATTRIBUTE OF AN STANDARD ITEM?

we need to set appropiate "display" lenght to an item (VO attribute) in a standard OAF page.This item has maximum length=30 but length (to display)=25 . This is not acceptable for our customers because they can't see the complete value of the item
To see the item (Project Name):
Project Manager resp.--> Project List
Choose a Project.
CLick on Setup Page
There, it appears project information. One of the items is Project Name (Name).
As I said before, this item has maximun length =30 but displays only 25 characteres wide in the "box". Most of items have the same number in both of their properties, but not this.
How could we change it?
(of course respecting standards)
Page is : BasicInformationPG.xml
it is in /oracle/apps/pa/project/webui
I'm trying to see where to modify the attribute length while I'm extending the VO.
I mean:
I create in JDeveloper a VO (ProjectBasicInfoVO) extending the original.
I edit VO and go to Attributes... and I see that "Type" property for "Name" attribute is VARCHAR2(30). But.. 30 is not the number of characters we can see in the screen... so How could I change the "length" property of "Name" attribute while extending the VO?
Please, provide detailed steps. Sorry, I don't see so easy as you say ...

OAF questions should go into the OAF forum.
In general you can use the UI control hints for the attribute to set its display width.

How to change the attribute of process instance by PAPI web service

Is it possible to change the value of the attribute of one process instance by PAPI web servcie?
thanks!

That information is stored in the table PPROCINSTANCE in the engine database in the column instancedata, it is a blob.
HTH

How to change protected attribute?

Hi all,
This is the situation:
In standard SAP there is an object OBJ_A with a protected attribute ATTR_P. The object has a getter method for the attribute, but no setter.
My requirement:
i need to manipulate/change the protected attribute ATTR_P.
what i've tried so far:
I created my own class CL_Z which inherits from the class of OBJ_A. Then i created a method CHANGE_ATTR_P.
In a BADI where the standard object OBJ_A is available i instantiated my z-object OBJ_Z.
With casting, referencing etc i tried to get to the protected attribute. but no luck.
has anyone any suggestions?
Thanks alot.
Joris Bots

> In a BADI where the standard object OBJ_A is
> available i instantiated my z-object OBJ_Z.
> With casting, referencing etc i tried to get to the
> protected attribute. but no luck.
If the BADI gives you an object which has the type of the parent class then you cannot cast it into the subclass type. I doubt that there is any chance to change the protected attribute because it might be protected for a reason.
It would work if the protected class implements an interface and the getter method is defined in the interface but that is not the case, correct?
cheers
Thomas

How to change cn attribute

Similar Messages

Maybe you are looking for