How to change color of blinking LED

Hello,
in the attached file is a LED with property blinking = true.
The problem is that it blinks yellow.. How can i change the yellow to another color?
TFTC
Attachments:
blink.vi ‏9 KB

If you go into the labview options, and select colors. There is a color for the blink foreground and for the blink background. Changing these from the defaults will add these entries to you labview.ini file.
blinkFG=
blinkBG=
If you make an exe from your VI you will need to add these two entries to you exe INI file. You can also change the speed. On the upside, you can do this programatically, but it will require a restart of the VI in order to re-read the INI file.. I think, I have not tested it... but I assume that it is only read on launch. You can experiment with it.
You can also change the blinking speed in the properties which adds the line
blinkSpeed=
I hope this clarifies things
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Similar Messages

How to change colors of LCD/VFD controls from SGC-Tek?

Hi Anybody got idea how to change colors of LCD/VFD controls from SGC-Tek?
I have tried but could not. When I try to make myself a nest cluster of clusters of LEDs, I can change colours but I can't do the same thing with LCD/VFD controls.
Please check at LCD/VFD controls
Clement

I suspect this repsonse is somewhat mis-leading, the code has no effect on the control other than setting its state, although the route is somewhat tedious for the mod.
I would imagine that the control is set up so that the pixels didn't move around when they are being used as controls.
There are nested groups and locks on the controls, which might make the ordering in the cluster easier to manage.
The following should work....... ;-) it did for me
Open your own new VI
Open the main LCD VI
Open the Browse VI Hierachy
Drag and drop the LCD VI onto your own diagram
Create a cluster from the LCD VI's connector
Now ungroup the clusters and unlock them (this is tedious) if you create your own then you could be more imaginative in the structure, I leave that for homework.
Then import a new bitmap (gif) into the control
Now update the modified contol back into the master control
........ Told you it could be done, but I am not sure the pain was worth it.
BUT
Try the alternative control..... with colour settings as well, ANY colour and even some size control.
It was here http://members.lycos.co.uk/sgctek/

How to change colors of individual column bar in the same data series

in mac numbers, how to change colors of individual column bar in the same data series. The entire column series gets selected in the column bars and cannot select to change colors of specifc bars.

Hi Kiran,
no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
Regards,
Govindu

How to change colors in Auction monitor

Hi Experts,
Could you please help me on below requirement,
In Auction Monitor , need different darker colors for tracking bids because some colors cannot be seen on the screen.
Could you please guide me how to change colors in Monitor.
Thanks,
Pavan.

Hi Vinay.
I would like to suggest a couple of references, quite similar to your requirement,
[SDN - Reference for Different Colors in Single Graphical bar|About Different Colors in Single Graphical bar;
[SDN - Reference for changing colors for graphs|Anyone used colors in VC?;
[SAP HELP - Standard Reference for Assigning Colors to Parts of a Graph|http://help.sap.com/saphelp_nw04/helpdata/en/39/cca358576911d1896f0000e829fbbd/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

How to change color in BEx Browser?

Hello Friends,
How to change color in BEx Browser?
My browser shows all the report description with pink color. I want to change the color.
Please let me know.
Thanks in advance.

Hello Bhavin,
It seems the patches for BW Add-On are being kept pretty much in sync for 6.20 and 6.40 (i.e they seem to be released at around the same time, even that the patch level numbers are different).
However, at BW Add-on Patch level 4 on a SAPgui640 machine, we didn't have the "pink font" problem.
It may be that BW 3.5 Add-On patch 6 will have a similar effect for you - it may be worth trying.
Here is the link to the BW3.50 patch 6... https://smpdl.sap-ag.de/~swdc/012002523100000108232005D/bw350_6-10001615.exe?_ACTION=DL_DIRECT
The patch 6 referred to above is for the BW3.50 Add-On - the SAPgui patch is typically a different number (the 11 that you mention is the SAPgui patch level).
Best regards,
Pat M.

How to change color in the title line?

Hi experts, How to change color in the title line, i show an image for explained better
!http://img688.imageshack.us/img688/9259/imagenjar.png!
thanks

in Views.css file
file below object.and change border-color as you desired to reflect.
.TitleTable {
     font-family: arial, helvetica, sans-serif;
     border-width: 0 0 4px 0;
     border-style: solid;
     border-color: #6666cc; ----> change here.
hope this helps !
-Niranjan K

How to change color of text is value is equal to 0

how to change color of text or background if value is equal to 0

HI,
In Template Builder,Insert the conditional region,there you select the column and give condition is equal to 0 and in advanced enter the following code
<?if:XMLfield=0?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?>
try this it works.
Regards
Uday

The way of changing color in blinking lights

Hi. Please tell me the way of changing color in blinking lights.
in the present program,　
There is a slider and it's property node with blinking and Fillcolor.
Property node with Fillcolor conected color box with blue.
so, I run program then slider turn on and off and showing blue and yellow.
I want to change the yellow to another color!!
I am look forward to your response!

Hi Kazu
There are two ways:
1. You can change the blink color in the LV-options (tools >> options >> color), which is a general setting.
2. You make a little vi that changes the color of the control using a property-node. This way is more flexible, as you can use every color.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

How to change color of selected label from list of labels?

My Problem is that I have a list of labels. RowHeaderRenderer is a row header renderer for Jtable which is rendering list items and (labels).getListTableHeader() is a method to get the list. When we click on the label this code is executed:
getListTableHeader().addMouseListener(new MouseAdapter()
public void mouseReleased(MouseEvent e)
if (e.getClickCount() >= 1)
int index = getListTableHeader().locationToIndex(e.getPoint());
try
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
AcknowledgeEvent ackEvent = new AcknowledgeEvent(
this, (ae_AlertEventInfo)theAlerts.values().toArray()[index]);
fireAcknowledgeEvent(ackEvent);
((HeaderListModel)listModel).setElementAt(ACK, index);
catch(Exception ex) {;}
Upon mouse click color of the label should be changed. For some period of time ie. Upto completion of fireAcknowledgeEvent(ackEvent);
This statement is calling this method:
public void handleAcknowledgeEvent(final AcknowledgeEvent event)
boolean ackOk = false;
int seqId = ((ae_AlertEventInfo)event.getAlertInfo()).sequenceId;
if (((ae_AlertEventInfo)event.getAlertInfo()).ackRequiredFlag)
try
// perform call to inform server about acknowledgement.
ackOk = serviceAdapter.acknowledge(seqId,
theLogicalPosition, theUserName);
catch(AdapterException aex)
Log.error(getClass(), "handleAcknowledgeEvent()",
"Error while calling serviceAdapter.acknowledge()", aex);
ExceptionHandler.handleException(aex);
else
// Acknowledge not required...
ackOk = true;
//theQueue.buttonAcknowledge.setEnabled(false);
final AlertEventQueue myQueue = theQueue;
if (ackOk)
Object popupObj = null;
synchronized (mutex)
if( hasBeenDismissed ) { return; }
// mark alert event as acknowledged (simply reset ack req flag)
ae_AlertEventInfo info;
Iterator i = theAlerts.values().iterator();
while (i.hasNext())
info = (ae_AlertEventInfo) i.next();
if (info.sequenceId == seqId)
// even if ack wasn't required, doesn't hurt to set it
// to false again. But it is important to prevent the
// audible from playing again.
info.ackRequiredFlag = false;
info.alreadyPlayed = true;
// internally uses the vector index so
// process the queue acknowledge update within
// the synchronize block.
final ae_AlertEventInfo myAlertEventInfo = event.getAlertInfo();
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.acknowledge(myAlertEventInfo);
myQueue.updateAcknowledgeButtonState();
// here we should stop playing sound
// if it is playing for this alert.
int seqId1;
if (theTonePlayer != null)
seqId1 = theTonePlayer.getSequenceId();
if (seqId1 == seqId)
if (! theTonePlayer.isStopped())
theTonePlayer.stopPlaying();
theTonePlayer = null;
// get reference to popup to be dismissed...
// The dismiss must take place outside of
// the mutex... otherwise threads potentially
// hang (user hits "ok" and is waiting for the
// mutex which is currently held by processing
// for a "move to summary" transition message.
// if the "dismiss" call in the transition
// message were done within the mutex, it might
// hang on the dispose method because the popup
// is waiting for the mutex...
// So call popup.dismiss() outside the mutex
// in all cases.
if(event.getSource() instanceof AlertEventPopup)
popupObj = (AlertEventPopup)event.getSource();
else
popupObj = thePopups.get(event.getAlertInfo());
thePopups.remove(event.getAlertInfo());
SwingUtilities.invokeLater(new Runnable()
public void run()
// search vector elements to determine icon color in main frame
String color = getColor();
fireUpdateEvent(new UpdateEvent(this, blinking, color));
// Call dismiss outside of the mutex.
if (popupObj !=null)
if(popupObj instanceof AlertEventPopup)
((AlertEventPopup)popupObj).setModal(false);
((AlertEventPopup)popupObj).setVisible(false); // xyzzy
((AlertEventPopup)popupObj).dismiss();
else
// update feedback... ack failed
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.setInformationMessage("Acknowledge failed to reach server... try again");
return;
Code for RowHeaderRenderer is:
class RowHeaderRenderer extends JLabel implements ListCellRenderer
JTable theTable = null;
ImageIcon image = null;
RowHeaderRenderer(JTable table)
image = new ImageIcon(AlertEventQueue.class.getResource("images" + "/" + "alert.gif"));
theTable = table;
JTableHeader header = table.getTableHeader();
setOpaque(true);
setHorizontalAlignment(LEFT);
setForeground(header.getForeground());
setBackground(header.getBackground());
setFont(header.getFont());
public Component getListCellRendererComponent( JList list, Object value,
int index, boolean isSelected, boolean cellHasFocus)
int level = 0;
try
level = Integer.parseInt(value.toString());
catch(Exception e)
level = 0;
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
this.setHorizontalAlignment(JLabel.CENTER);
this.setVerticalAlignment(JLabel.CENTER);
setIcon(image);
else
setBorder(BorderFactory.createLineBorder(Color.gray));
setText("");
setIcon(null);
return this;
I tried but when i am clicking a particular label, the color of all labels in the List is being changed. So can you please assist me in changing color of only the label that is selected and the color must disappear after completion of Upto completion of fireAcknowledgeEvent(ackEvent);

im a bit confused with the post so hopefully this will help you, if not then let me know.
I think the problem is that in your renderer your saying
setBackground(header.getBackground());which is setting the backgound of the renderer rather than the selected item, please see an example below, I created a very simple program where it adds JLabels to a list and the renderer changes the colour of the selected item, please note the isSelected boolean.
Object "value" is the currentObject its rendering, obviously you may need to test if its a JLabel before casting it but for this example I kept it simple.
populating the list
public void populateList(){
        DefaultListModel model = new DefaultListModel();
        for (int i=0;i<10;i++){
            JLabel newLabel = new JLabel(String.valueOf(i));
            newLabel.setOpaque(true);
            model.addElement(newLabel);
        this.jListExample.setModel(model);
        this.jListExample.setCellRenderer(new RowHeaderRenderer());
    }the renderer
class RowHeaderRenderer extends JLabel implements ListCellRenderer
    JTable theTable = null;
    public Component getListCellRendererComponent(JList list, Object value,
                                                  int index, boolean isSelected, boolean cellHasFocus){
        JLabel aLabel = (JLabel)value;
        if (isSelected){
            aLabel.setBackground(Color.RED);
        }else{
            aLabel.setBackground(Color.GRAY);
        return aLabel;
}

How to change color of list box highlighting in Acrobat 9 Pro?

When you create a list box in Acrobat 9 Pro you select the default value. That default value displays on the form in a highlighted color. Does anyone know how to change the color of the highlight or ideally make it no color? Thanks.

When you create a list box in Acrobat 9 Pro you select the default value. That default value displays on the form in a highlighted color. Does anyone know how to change the color of the highlight or ideally make it no color? Thanks.

How to change color of background and font in Message Boxes

I have a req, where I have to display a warning message for certain condition. I did that using pagecontext.putDialogMessage(msg).
But the business wants to have the displayed message in a more bright color. I didn't come across any documentation on how to change the background and font of a Message Box. Can you please help me out in solving this issue ??

user597481 ,
Here are my responses:
For displaying a warning message, putDialogMessage takes only an OAException bean.
OAException is a java class and not a java bean.I'm not clear on how to use a OARawTextBean to display a warning message. I tried looking thru dev guide but still am not clear on how to do it.
>>
1)Add a raw text bean in pagelayout region at the top.
2) Now in ur code whenever u need to throw exception, set some page parameter say xxx=true and then, use pageContext.redirectToCurrentPage
that will redirect the flow to process request.3)In process request based on page parameter xxx=true, u can get exception message and use setValue in raw text bean to show it.
I hope this is clear
--Mukul

How to change color in analytics chart designer

Hi Guru's,
Could any one tell me how the chart color can be customized by using chart designer.
I need to change the category colors in the way High--> Red, Medium --->Yellow , Low ---> Green.
Chart designer doesn't gave me the flexibility to change the category or point section color through that.
Thanks
Praveen Gupta

Hi,
check the properties of graph. I guess you can change the colors in properties.

How to change colors of table col and row header?

Could I change table header colors when run vi ? Is such a thing possible?
ex: Header words color from black changed to green in column 2 of table.

cloud a écrit:
...But I mean is "How to change header words color" not changed cell words color.
tst gave you the answer ! A header cell is just a cell with a -1 value as index...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to change color default in Mail

I have Apple Care and called and spoke at length to tech support. I know how to set the font default but cannot figure out how to change the color default. Tech support didn't know either. I've read "The Missing Manual", gone to Mail, Preferences, Colors and can't seem to perform what should be a relatively simple task.
Thank you.

Come on guys, this has got to be a common request.
Yes, it has been discussed here for years now. Mail has never had default settings for font face, font size, or color. You can use custom stationery or begin your text in the first line of a signature which has the style you want. For some people it who really need this feature it makes sense to use Entourage or Thunderbird instead. To ask Apple to add these in 10.7, you can go here:
http://www.apple.com/feedback/macosx.html

How to change color of blinking LED

Similar Messages

Maybe you are looking for