How to change colors in one picture that they will be similar to colors in other picture

Rather big title but I couldn't find better one.
I have two pictures presenting the same thing, but in different light (e.g. one is made in the morning and one in the evening). So - similar objects have different colors. How can I change the a picture that the colors of objects will be similar to the second one? Something like taking histogram from one picture and using it in the second one. Can it be done in PSE8?

Hi,
I haven't done it in PSE 8 but use that frequently in PSE 9 and thought it would be useful to post it here. in PSE 9, you can use the Style Match feature of Guided Edits. I find that quite useful.
Thanks

Similar Messages

When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?

When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?

I shoot only RAW - no JPEG-files except those visualizing the files on my memorycard or computer. I think i have to refine my question;
1. I know there is possible to make B/W HDR-images.
2. I know the best HDR images are based on RAW-files.
3. When i transfer the images in question to a HDR software they change, so when i view them in the software (either Preview or the HDR software) they are suddenly viewed (and processed) in color.
4. This never happend on my PC so i know it has to do with either Finder or Preview.
5. Do i have to make all my B/W HDR-images on the PC or is it a way for me to change how Finder/Preview show/alter my images?

How to change my ipad passcode knowing that i lost my old one

how to change my ipad passcode knowing that i lost my old one

If you've forgotten your passcode then you'll need to connect the iPad to the computer that you normally sync to, and you should then be able to restore your content from your computer : http://support.apple.com/kb/HT1212 - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

HT5621 Me and my daughter are using the same Apple id and we share the same iCloud account. I want to change her Apple id so that she will have her own icliid account and I will have mine. how do I do it?

Me and my daughter are using the same Apple id and we share the same iCloud account. I want to change her Apple id so that she will have her own icloud account and I will have mine.
1. how do I do it?
2. how do I transfer her stuff which is in my icloud storage to her new icloud account once this one is created?
thanks,
Ari

To migrate her device to a new account, start by saving any photo stream photos she wants to keep to her amera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow, then tapping Save to Camera Roll. If she is syncing notes with iCloud, you'll need to open each of the notes and email them to her so she can later copy and paste the text into new notes created in her new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create her new account and choose Merge to upload the data.
Once you are on separate accounts you can each go to icloud.com from a computer and delete the other person's data from your account.

How to change the default BC image that shows in the address bar?

Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
Thank you!

Hi,
If you are trying to change the favicon for your site,
You can do it from Site Manager-> Page template -> Default Template
Look for the code <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
Please let me know if you have any doubt.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

HoW to ChaNGE the text in the mobile application to be in MulTi-CoLoR text

_* Do anyone can tell me how to change the text in the mobile application to be in multi-color text, to make it more interesting and increase readability?
Is it using the Graphic's paint() method? or any better suggestion?
Please give the short example if can?
Please help... "_"
Hearing from u all soon...@_@
thanks....

Go into outline view. If you can see the outlines of the letterforms, you can't just change the text. If the letterforms are solid black, take the type tool, select the text and type yours.
Anyway you can just select the letters, take the type tool and type new text.
Working with the type tool is a basic. Please see the manual for details

How do I run one vi that has a continuous loop in parallel with other vi�s

I am currently attempting to run one vi that has a continuous
loop in parallel with other vi’s. When I
run the program it hangs up in the continuous loop vi and does not execute any
other steps in the program. The loop vi
is for temperature checking, control and recording once it reaches a certain temperature
gradient. The other vi’s are for other functions
like pressure readings and flow rates, for example.
Where am I going wrong and what can I do to fix this
problem. Thank you for your time and
help.

Here is a zip file with the vi in question. The
spraycooling6 and the TempStep5 both run fine alone but when I add the TempStep
to the Spraycooling6 it only runs the TempStep and hangs up the program.
I'm new to LabView and know that the code is probably not optimized for some
functions. In addition, this is still a work in progress for me so this is
not the final vi. Again, thank you for you time and input I
appreciate it.
Attachments:
Spraycooling6.zip ‏137 KB

How to set up recordings of audio and video so that they will sync

I'm editing footage of a dance concert that used CDs for some of the dances and a live pianist for the remainder. In addition to the audio captured by the camera, I have all the CDs that were used and an additional audio recording of the piano that sounds much better than what was captured by the camera. I would like to use to mix the audio from the camera with the audio from the CDs and the additional recording of the piano, but the sources won't sync properly, since the camera, the CD player, and the audio recorder all run at slightly different speeds. For example, if I zoom in and line up the CD audio with the camera audio at the beginning of a song that lasts 3:21, at the end of the song the CD audio is late by about 11 frames. That's enough that I can't use the camera audio as ambient sound, and enough that the dancers are noticeably ahead of the music (by 11 frames).
I know I could time-correct my sources so that they will sync, but I'm wondering how to avoid this problem in the future.
Thanks,
John Link

John,
On most professional recording or editing environments we try to run a sync signal to all the devices. Many of the audio recorders out there are not equipped to accept or send sync. For that matter, neither are the consumer and prosumer cameras. That's one of the many things dividing pro from non-pro.
Wild sync , just running at a true and constant speed, is a lot easier now than " in the day." but one still sees issues like you have when not running sync between devices.

Whenever I open a file of any type, that file will open, as well as multiple other files I do not wish to open. How do I prevent this from happening.

Whenever I try to open a file of any type, that file will open, as well as several other files I do not wish to open. How do I prevent this from happening?

Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

How do we setup the queues so that they process data automatically

Hi Guru
how do we setup the queues so that they process data automatically in XI/PI ??
thanks and regard
Madavi

Hi,
There is actually one thing that needs to be checked -
You need to make sure the QIN scheduler is active before messages are processed automatically otherwise they will remian unprocessed on the queue.
Speak to a Basis person about this and they will ensure it is running.
Hope this helps.
Regards
Colin.

TS4020 I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?

I live in a house with multiple iCloud users. When they try to turn on "Find my computer" they get the message that they will have to disable my "find my computer" setting in order to enable theirs. How can they all be enabled at the same time?

Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

When i was scrolling through my camera role today before i updated and like 100 pictures turned into a picture thats white then says PNG. Cant see the picture. What should i do?

when i was scrolling through my camera role today before i updated and like 100 + pictures turned into a picture thats white then says PNG. Cant see the picture. What should i do?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

[svn:fx-trunk] 13299: fix the _rb swc so that it updates properly when changes happen - update=" true" so that it will compile correctly when using locales

Revision: 13299
Revision: 13299
Author:   [email protected]
Date:     2010-01-05 19:07:45 -0800 (Tue, 05 Jan 2010)
Log Message:
fix the _rb swc so that it updates properly when changes happen - update="true" so that it will compile correctly when using locales
QE notes: ensure it contains a catalog.xml file, a swf, and a locale directory with properties file
Doc notes:
Bugs: https://bugs.adobe.com/jira/browse/SDK-24802
Reviewer: pete
Tests run:
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24802
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/build.xml

I've dropped my guard before with the security and I had so much trouble with my computer because of all the people trying to attack my computer I just can't take the chance again. www.MySafetyGates.com

I need to connect my Nikon D3x directly to my MacBook Pro. So that once I take a picture, that photo will show up instantly in Photoshop CS5 in my MacBook Pro. Is it possible?

I need to connect my Nikon D3x directly to my MacBook Pro. So that once I take a picture, that photo will show up instantly in Photoshop CS5 in my MacBook Pro. Is it possible?

You should ask in the Photoshop CS5 forum.

How to change colors in one picture that they will be similar to colors in other picture

Similar Messages

Maybe you are looking for