How to change colour settings on Satellite Pro P300

I just got my new laptop and can't for the life of me find how to change the colour settings in the monitor.
On my old desktop there was a button on the monitor.
Being a first time laptop user im going nuts trying to find how to change my monitor settings...
If anyone can help id be so grateful

Please dont mix the notebooks internal monitor with the external desktop PC monitor.
You will not find any control unit like on the external monitor which would help you to change the color.
I dont know what graphic chip your notebook uses but my notebook supports Intel graphic card and the preinstalled Intel graphic media accelerator (in control panel) provides some settings for color correction;
The settings are; color, gamma, brightness and contrast
There you can set the values between 0 and 100
Maybe this is what you are looking for

Similar Messages

  • How to change the HDD on Satellite Pro 430CDT

    Can anybody tell me where I could find simple instructions telling me how to dismantle my old 430CDT in order to fit a larger hard drive? I'm thinking of replacing the 1.25gb drive with a 4 or 6 gb hdd - assuming the drives I have can be persuaded to fit.
    I'm guessing the hard drive is hidden somewhere beneath the keyboard, but can't work out how to remove +that+ without damaging it.
    I have no real experience of this sort of thing - I've done nothing more complicated than fitting new RAM to a less-ancient A120, and changing hard drives around on a Satellite 320.
    The archives don't help, unfortunately, although it's entertaining reading the old press releases and adverts and seeing what was considered high-performance just twelve or thirteen years ago - progress in computer design is pretty rapid, isn't it?. Makes one realise that within a couple of years from now anything with less than a terabyte HDD and quad-core processor will be as amusingly obsolete and limited as my old 430 seems now.
    Absolutely no practical reason for this - purely out of curiosity, and just for the fun of it.
    Any suggestions would be appreciated - thanks in anticipation!

    Thanks for that suggestion - unfortunately, I still can't locate the hard drive.
    With the computer upside-down, I can get at the memory (a rectangular plastic covered secured with two screws), the battery (which I've removed for now), and the lever which ejects the CD-ROM (or floppy drive).
    Looking round the sides of the machine, I see PC card slots and various connectors/ports - most of which I don't recognise...
    Your description would suit my other ancient machine, a Satellite 320, perfectly - and replacing the hard drive on that takes but a couple of minutes. The 430 seems more difficult, to say the least.
    If you could suggest anywhere else for me to look, I'd be most grateful!

  • How to Change Port settings on Satellite L25-S2161

    I'm working on this system for a friend. System runs XP Home Edition, SP2. There are 4 user profiles-all administrators. The family recently moved to Verizon/FIOS as their internet provider.
    With two users I can log on, connect to the network wirelessly, and surf the net using IE or FF. When I log onto the system with the son's profile, the network shows connected, but I can't connect to the internet with any browser. When I run wireless repair, the message states that the http port (80), https port (443), or FTP port (21) settings might be blocked.
    When I go to Device Manager to check the port settings, Ports is not shown, and it isn't shown on any of the entries.
    There is no restore point set on the machine. The son is the only user with a large body of files, iTunes settings, and more, so I haven't wanted to delete his profile and start over. The same results happen when I take the system home and log onto my linksys network.
    Anyone have recommendations for next steps?

    I haven't wanted to delete his profile and start over.
    Do it this way.
       How to copy data from a corrupted user profile to a new profile in Windows XP
    Be sure to import the email messages and addresses before deleting the old profile.
    -Jerry

  • HT4356 I have two printers on my network.  Does anyone know how to change the printer nomenclature - Officejet Pro 8600  (0B54AF) to a recognizable name...like Brad's Office?

    I have two printers on my network.  Does anyone know how to change the printer nomenclature - Officejet Pro 8600  (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

    You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

  • How to Change Security Settings on an Existing Wireless Network

    I'd like to change existing network security settings to WPA2, AES or at least to from TKIP to AES.
    I'm familiar with browser access to the router and with how to change the settings on the router.
    My question is how to do this as painlessly as possible for the network.  Step by step would be nice
    I guess first I have to change the router settings using the computer running Easy Link Advisor?
    Do I then have to disconnect/reconnect that computer?
    Do I have to disconnect every other computer and then connect each one again with the updated settings?
    Will the change in security settings affect my print server?  If so, do I have to set it up from scratch in ELA?
    For the record, I have a WRT-300N and the print server is a 54g.
    Anyone who reads this may also want to look into recent news.  May not be a big deal, but a vulnerability of WPA/TKIP has been identified.
    Thanks in advance to anyone who answers.
    Solved!
    Go to Solution.

    Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my  network and none were available. Does that matter?
    The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
    So now I have an unsecured network. Am I vulnerable to attack?
    Which leads me to my real question How do I change the security settings?
    Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
    Thanks,for any help
    Phil

  • How to change screen settings

    Hi
    I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
    I m using the version 4.5b.
    Thanks & Regards
    Ravindra

    Hi,
      refer u may get an idea.
    https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
    Regards

  • Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

    my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

    To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
    http://support.apple.com/kb/HT1766

  • NW04s: How to change column settings like 'do not adjust' 'fit to resuts' e

    In the new Analyzer, old report format: how to change column settings: do not adjust, fit to results, etc.?
    Regards
    -Bala

    Hello,
    In the properties dialog of the Grid and some other items, there is a checkbox by name "Autofit". When this is checked, the result columns are expanded to correct data widths.
    Regards,
    Manjunath

  • How to change the Settings in the Graphic structure. T Code CN41

    Hi,
    How to change the Settings in the Graphic structure. T Code CN41
    Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
    Pls advise me.
    Thanks in Advance.
    Raju

    Hi,
    Thanks for the reply. But please clarify a bit. Please below is my requirement.
    As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
    Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days.  I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
    Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
    Regards
    Raju

  • How to change Preset settings (CS4)

    Hello everyone,
    I'm going to make a video with Adobe Premiere CS4 and I need to know how to change Preset settings or however it is called, because I think none of the Presets match with my videos (tried some and my videos were bigger or smaller).
    My videos are .mov, 800x600, made and rendered in Autodesk 3ds Studio Max 2010 (3D Program).
    Could someone please help me? I don't know if there's a preset for me or if I have to change settings or something like that (and where). Yes, I'm new! I'm from Spain if you need it.
    Feel free to ask anything you need, of course.
    Thanks in advance,
    Marta

    Marta,
    Welcome to the forum.
    In CS4 and CS5, one can set the Preset at the Sequence level. Before, it was more global, at the Project level.
    In Sequence New, you will choose the Desktop Preset, and then you can alter almost every displayed attribute, such as Frame Size, or Frame Rate, etc. you want to match your Sequence to your source footage 100%. After editing with those attributes matching, you can then Export to a desired output setting with AME (Adobe Media Encoder). You choice of Desktop, allows you to customize the settings to match. I wish that Adobe had named it "Custom," as the term "Desktop" is a bit abstract, though it has been around for a very long time.
    Good luck, and do match your Sequence settings (Desktop) to your source footage.
    Hunt

  • HT1296 cannot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks

    i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.

  • Satellite Pro P300 - How to obtain the factory image without media?

    Hello
    I have been given a Satellite Pro P300 and it has the recovery disc for win xp, I would like to go back to the pre installed Vista intallation if possible.
    The recover partition on the hard drive isnt available so i assume it cant be recovered. Is it possible to purchase a factory image?

    Liam is right Win 7 is better than Vista OS.
    So if you have a possibility to install Win 7 I recommend doing this instead of Vista.
    However, the Toshiba recovery disk contain just Vista OS.

  • Satellite Pro P300-1CG wakes up from sleep mode when unplug USB mouse

    I often transport my laptop from one working place to another.
    Usually put it into sleep mode, unplug the USB mouse and lay in the bag.
    However every time I unplug the USB mouse - the laptop wakes up and I have to put it into sleep again.
    This is annoying. Is there any way to set up laptop _not_ to wake up on USB activity?
    I didn't find any option in power settings of Vista, neither in BIOS.
    My BIOS is up to date (just updated, but didn't help).
    I use Windows Vista Business on Toshiba Satellite Pro P300-1CG.

    Hi
    > Usually put it into sleep mode, unplug the USB mouse and lay in the bag.
    Why you dont unplug the USB mouse firstly and then put the notebook into the sleep mode?
    This would solve your issue ;)
    From my knowledge the BIOS provides only the options: Wake-up on keyboard and Wake up on LAN.
    There are no options for Wake up on USB and therefore such settings cannot be changed...
    Cheers

  • Satellite Pro P300 - HDMI output port doesn't fit

    Hello All,
    Well this is starting to drive me to distraction and Im hoping theres someone who can put me out my missery lol.
    I have been trying to hook my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable I use for my PS3 but the connector just wont fit. I keep finding all these posts in various forums saying how they cant get sound out the HDMI connection...that would be great, as at least that means they have them connected.
    Are there different connections for HDMI? The one I have is diagonal connector but the port on the laptop is more square, and just doesnt fit. So if there isnt a connector, does that mean I have a funky port, on the laptop.
    There is also the matter of connection my laptop to my amp that controls the surround sound system. What connection is best to use, as there is no real audio out connections?
    Cheers

    Hi
    Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
    Maybe you can also post a picture of the HDMI port. Normally there are no different HDMI ports, all have the same physical dimension.
    Im not PS3 owner but maybe it has a special connector. Have you tried another cable?
    Regarding the audio connection I use the normal line out port for my external speakers. Did you test this?

  • Satellite Pro P300 (PSPC5E) - Webcam driver open fail on Windows 7

    I've installed the RC of Windows 7 64 Bit on my Satellite Pro P300-PSPC5E and I'm experiencing problems with the configuration of my webcam and microphone.
    I've tried to install the camera assistant software, 64-bit (windows vista) to configure the webcam but I keep getting an error with 'Webcam driver open fail. Please restart camera or computer.' neither of a camera or computer restart work. I do get picture in Skype but I can not edit settings or so (dark picture) and the microphone is way more silent then it was on windows XP, although it's set on the maximum sound.
    Is there a solution for this problem? I hope so :)

    Hi
    I think there is no solution for this problem at the moment because you are using a Release Candidate of Windows 7 and at the moment there are no official drivers for Windows 7 available.
    You have already tried the Windows Vista driver so thats all what you can do. Alternative you visit the Toshiba US page (http://www.csd.toshiba.com) and search for Windows 7 beta driver. Maybe it works.
    Good luck! :)

Maybe you are looking for