How to change computer user name after installing a new hard drive on my computer. HELP

TO WHOMEVER CAN HELP ME:
How do I change my computer user name after HP installed a new hard drive on my computer. Now it is called TEST?? So on my C drive instead of saying my name it says TEST. Please help???
Thanks in advance for any help I can get.
Christina

Hi, Christina:
Go to the control panel and then to user accounts. Select the Change Your Account Name option. Change the account name from Test to Christina.
That should do it for you.
Paul

Similar Messages

How to install a recovery partition after installing a new Hard drive? and FileVault help.

Hi,
I recently swapped out hard drives and when I did a Time Machine backup to the new drive, I noticed there was no Recovery HD partition for my drive. Is there a way to install it back on my MacBook Pro (Late 2011, running 10.7.4)?
On a slighlty different topic FileVault won't let me encrypt my new HD it says "Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk."
What formatting does my disk require for FV to be turned on? Currently it is Mac OS Extended (journaled)
If there is a solution to solve both these issues, or any one issue it would be appreciated.

The formatting being referred to is actually the presence of the Recovery Disk.
You can't enable FV2 without a recovery partition being present. The reason is strictly logical: if your entire disk was encrypted, how could you run the unencryption procedure you need to start up? That would itself be hidden behind the encryption. Hence, for FV2 to be able to work, you must have a Recovery disk present.
When you boot up with FV2 enabled, the login screen you see to enter your password is actually running from the recovery disk (invisible to the user). After you enter your password, recovery boots your encrypted partition and logs you in to your account.

I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

How do I put content from my iphone back into itunes after installing a new hard drive?

How do I put content from my iphone back into itunes after I have installed a new hard drive on my computer?

See Recover your iTunes library from your iPod or iOS device.
tt2

I had to install a new hard drive on my computer, when I downloaded itunes back onto my computer, none of my songs were there. how do i get them back??

I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

HT1335 My computer crashed and we installed a new hard drive. How do I sync my I pod nano 6th generation? Will I lose everything I have on the Ipod ?

My computer crashed and we installed a new hard drive. How do I reinstall I tunes and sync my Ipod Nano 6th generation? Will
I lose everything I have on it?

If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
http://www.wideanglesoftware.com/touchcopy/index.php

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

What to do after installing a new hard drive on inspiron 1525

after installing a new hard drive on my inspiron 1525 I place the drivevers and utilities driver on the cd/dvd player drive, chose boot from cd/dvd drive, and I get this message
your cd/dvd drive during this boot cycle is f:
a RAMDISK drive is available for this boot cycle as C:
it contains several hard drive setup tools. Please use these tools only under the direction of dell support staff.
F:\>
What do i enter after F:\> ?????????
<ADMIN NOTE : Email Id removed per Privacy policy>

Hello Warren,
To understand the issue and help you further, I would request you to help me with few details about the issue.
-- What exactly is happening when you turn on the computer?
-- Do you see a black screen with a blinking cursor?
-- What is the Operating System?
-- What is the System Model?
Run a hardware diagnostics to check if there is any hardware failure.
-- Restart the computer.
-- Keep tapping F12 key on the Dell Logo screen.
-- From One Time Boot Menu, select Diagnostics and press Enter.
-- If the test fails please capture the Error Code and write back to us would be glad to assist with the next course of action.

I cannot access an older time machine backup after installing an new hard drive.

After installing a new hard drive I tried to access my older backups in time machine but cannot. They are there but do not light up and allow me to access them, or select them.

First, if you're worried about the possibility of losing a backup set, then your backup strategy is inadequate. You will certainly lose those backups, no matter what you do, when the drive hosting them fails, as it will eventually. If you take data safety seriously, you should have at least two complete, independent backups of all your data, one of which is off-site at all times. I suggest you make a second backup now, before doing anything else.
The action I suggested won't delete all the snapshots; only the selected one -- unless something goes wrong, which is always possible. Without adequate backups, nothing you do is safe.

D I have to install a new hard drive on my computer in order to upgrade my computer

I have an older IMAC with Mac OSX 10.5.8 installed. I am unable to upgrade my software. Will installing a new hard drive enable me to me up to date?

No. In order to upgrade:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Now, you may need a new hard drive, but not to upgrade the OS unless your drive has no more free space left.

If I can't find the start up disks, is there anyway to get iWork back after installing a new hard drive?

I had to install a new hard drive because my orginal one crashed. When I bought my macbook, iWork came pre-installed. Now with a new hard drive I would like iWork back on my computer, but can't find the start up disks, assuming I'd be able to do it that way. Is there anyway I can contact Apple and have them give me the iWork software?
(Overall, very upset about this since my macbook is only 2 years old and I lost everything. A friend of mine has been working on it for 3 weeks trying to recover some data.)

- Did you restore from a backup that contained the photos?
- The backup only contains photos in the iPod's Camera Roll album. It does not included photos synced to the iPod.
- All you can do is try restoring from backup again.

What do I need to do after installing a new hard drive?

I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

How to use Time Machine before and after installing a new hard drive

So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

How to change (NT)Domain Name after installed ERP?

Hello,
We are planning to change (NT) Domain Name on environment of already installed ERP/BW(WAS 6.40)/SRM/SolMan(NW 7.0).
We know SAP recommend that customer should be Re-install or System-copy SAP-System if the Domain name is changed after installed systems.
However, we do not have enough time and budget for doing that.
Questions:
1). If the (NT) Domain name will be changed, we only need to change the
OS users of service for SAP-System?
(I think that it is needed to change only OS-users of SAP-service. Is there other setting for that?)
2). The method of only changing users of SAP-service is not supported in this case?
(The customer will be not taken the SAP-Official support after doing that?)

Dear
Changing domain name is not supported by SAP if done in a productive environment (after systems have gone live).
You will probably not get support by SAP after you change the domain name once system is live.
There are a bunch of changes you will need to perform as well.
The domain name is probably existing in the RFC's and you cannot change all of those through SM59.
You will need to update those entries at Oracle level.
SAP parameters containing domain name
Java environment where domain name is contained
Reset hostname buffer
Service marketplace
SAP Logon
STMS
Monitoring perhaps, non SAP job scheduling
Please reward points accordingly
Kind regards
Tom

How to change computer user name after installing a new hard drive on my computer. HELP

Similar Messages

Maybe you are looking for