How to change connection port between INTEGRATION SERVER and Adapter Engine

Hi,
I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
Please advise ?
Thank You and Regards
Fernand

HI,
The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready  etc.
SO go to SMQ2 and check the status of the queues.
Also have a look into this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
<i>
Why I can see this messages only in the integration server?</i>
>>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
Regards,
Moorthy

Similar Messages

  • No Integration Server under Adapter Engine at Communication Channel

    Hello all,
    This is new PI7.0 install.
    I configured a file Adapter communication channel for an Integration Scenario.
    At field "Adapter Engine" under Parameters tap I am not able to select the Integration Server.
    Pull down menu is empty.
    I did sxmb_adm and blog 6077 that got "Integration Server" in file adapter. Later to that file to file scenario worked yesterday. However after java+abap stack complete restart (to cleanup unwanted manually created business system of type WEB AS ABAP) the problem came back today.
    I repeated again same blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory   sxmb_adm, sldcheck, rz70 all looks good, but no luck.
    There is a note from forum to change the content maintenance under
    SLD->Administration->Content Maintenance->Subset (Landscape description)...
    Need some pointers on what to change & get the file adapter to work? Thanks.
    Another observation is all adapters got empty menu (no Integration Server). However IDOC, HTTP got integration server populated.
    ====================
    Re: No Integration Server under Adapter Engine at Communication Channel config  
    Posted: Sep 12, 2007 4:46 PM    in response to: Jochen Schertel      
    Hi All,
    the problem was related to missing some Associations under Contend Maintenance for the Integration Server.
    After implementing again, the problem was solved!
    Regards,
    Jochen
    ====================

    Hi Jochen,
    Can you please check following parameters in sxmb_adm on your application server.
    Goto TC : sxmb_adm...select Integration Engine configuration n check whether you have maintained global configuration data as
    Role of Business System  : Application system
    and Corresponding Integ. Server : http://xi hostname:port/sap/xi/engine?type=entry
    Also check if you have created following RFC destinations:
    1. INTEGRATION_DIRECTORY_HMI(H)
    2.LCRSAPRFC (TCP/IP)
    3.SAPSLDAPI
    Nilesh
    Nilesh

  • Connection Settings between Content Server and DMS server

    Dears,
    I installed DMS server and Content Server,Now I need to do connection settings between these server.
    Both are installed on seprate servers.
    So please suggest what are the steps to set connection between these servers.
    Shivam

    Hi all,
    I installed the Content Server with DB instance.  ECC on AIX and the Content Server on Windows are on different domains and wanted to integrate. After the installation what I did is as follows...
    I am trying to create the Content Repository using the Tx- OAC0, given the the following details as
    Content Repository name--- DMS_xxxx
    Document Area - DMS
    Storage Type -- HTTP Content Server
    Version -0046
    HTTP Server --- fully qualified host name of the Content Server
    Port Number --- 1090
    HTTP Script --- ContentServer\ContentServer.dll
    Physical Basic Path--- (initially) -
    /usr/sap/<ECCSID>/SYS/global/
                                        (modified) --- E:\ContentServer\ -
    not available, thought it will create, even created later
    Physical archive path --- SAME as  Physical Basic Path
    When I check the connection, I am getting an error "Content repository DMS_xxxx does not exists.
    When I check Tx- CSADMIN-- it gives an error saying the "HTTP error : 4010 (authorized) ' Permission denied: adminContRep&configSet"
    I am not sure what user should i use for this and what should be  the information of ContentStorageHost, ContentStorageName and Storage need to be provided.
    Please help me in this....
    Regards
    Krishna

  • Connection Problem between BiW Server and BPC Server

    Dear all,
    Situation,
    We have a CSV file dumped in BI Application server in directory defined by us for all Transaction data. Now this CSV file needs to be moved to BPC Server.
    Connection/Link between BI and BPC server is missing. So we need one link between BI and BPC server, so that we can automate the movement of CSV from BI server to BPC server.
    Is there is any Tool from which can establish connection between two.(i.e. BiW and BPC server).
    OR
    Do we have any alternate solution of Transfering Transaction data from SAP R/3 or BiW Server to BPC Server.
    Thanks in advance
    Hardik

    Hi all,
    I installed the Content Server with DB instance.  ECC on AIX and the Content Server on Windows are on different domains and wanted to integrate. After the installation what I did is as follows...
    I am trying to create the Content Repository using the Tx- OAC0, given the the following details as
    Content Repository name--- DMS_xxxx
    Document Area - DMS
    Storage Type -- HTTP Content Server
    Version -0046
    HTTP Server --- fully qualified host name of the Content Server
    Port Number --- 1090
    HTTP Script --- ContentServer\ContentServer.dll
    Physical Basic Path--- (initially) -
    /usr/sap/<ECCSID>/SYS/global/
                                        (modified) --- E:\ContentServer\ -
    not available, thought it will create, even created later
    Physical archive path --- SAME as  Physical Basic Path
    When I check the connection, I am getting an error "Content repository DMS_xxxx does not exists.
    When I check Tx- CSADMIN-- it gives an error saying the "HTTP error : 4010 (authorized) ' Permission denied: adminContRep&configSet"
    I am not sure what user should i use for this and what should be  the information of ContentStorageHost, ContentStorageName and Storage need to be provided.
    Please help me in this....
    Regards
    Krishna

  • HT3986 How can i connect buletooth between windows 7 and iphone4?

    how can i get iphone4 bluetooth driver for windows 7?

    What data?
    You should be syncing with your computer regularly.
    iPad User Guide (For iOS 5.0 Software)
    You can email pics to your phone.

  • How can I connect to a UNIX server to execute a command?

    How can I connect to a UNIX server and execute a command using PowerShell? My shell script is sitting on one server, while the UNIX box is on another.
    also, I don't like the idea of hardcoding a username/password within the script file in order to do so.
    -Nothing to see. Move along.

    You will need a library to handle SSH connections.
    I'm using SSH.NET, you can find info on it here : http://www.powershelladmin.com/wiki/SSH_from_PowerShell_using_the_SSH.NET_library
    It has a bit of a learning curve but the web site has some fairly good tutorials.

  • How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

    How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
    Mac os x 10.9.2. ; Garageband 10.0.2

    There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

  • How to change the port in the URL of a BSP Iview

    Hello,
    we have several appraisal templates released in our R/3 system and we can access them by the portal.
    We are changing our systems and we are implementing a load balanced in order to improve the connections with the portal. So we need to know how can we change the port of the server that appears in the URL when we go to MSS ->teamviewer and select one appraisal to see the information of the template.
    We need to change it and indicate the port of the load balanced http://emsapl404pre.endesa.es:8000/sap/bc/bsp/sap/hap_document...) not the port of one of the WAS server as we have now http://emsapl404pre.endesa.es:8302/sap/bc/bsp/sap/hap_document...)
    Thanks in advanced.
    Best regards.
    Seshen

    Hi,
    Just view any BSP Application in SE80 and the click on Utilities(M)->Settings.
    This will fgive you option to change URL and port number of the URL..
    It will be under the Business server Pages tab in the settings window.
    Hope this helps.
    <b><i>Do reward each useful answer..!</i></b>
    Thanks,
    Tatvagna.

  • How to change the port number for deployment in JAVA Studio Enterprise 8?

    Hi!
    Yesterday i downloaded this new sun java studio enterprise and found it mind blowing.
    Now i find that all my previous applications which were running on port 8080 can't be run on sun java studio enterprise(sjse) 8.
    Can anyone tell me how to change the port number on this software so i won't have to edit all my applications?

    http://docs.sun.com/source/819-0080/install.html
    In the Admin Configuration page (or at the command line), enter the following:
    Admin User Name�Name of the user who administers the server
    Password�Admin user�s password to access the Admin Server (8-character minimum)
    Admin Port�Administration port number for initial server instance
    HTTP Port�Port number to access the default server instance
    HTTPS Port�Secure port number to access the default server instance

  • How to change connections parameters?

    Hi,
    How to change connections parameters
    For Local BC4J JClient Application with a Simple executable JAR File?.
    The name of de Server in Production is not equal to the name of de Server Test.
    URL (production) is= jdbc:oracle:thin:@OtherServer:1521:OtherBase
    URL (test) is= jdbc:oracle:thin:@MyServer:1521:MyBase
    Without generate a new jar.
    In other terms, how to deployment de executable simple jar for distribution with configurable connection parameters.
    Thanks.

    Hi,
    How to change connections parameters
    For Local BC4J JClient Application with a Simple executable JAR File?.
    The name of de Server in Production is not equal to the name of de Server Test.
    URL (production) is= jdbc:oracle:thin:@OtherServer:1521:OtherBase
    URL (test) is= jdbc:oracle:thin:@MyServer:1521:MyBase
    Without generate a new jar.
    In other terms, how to deployment de executable simple jar for distribution with configurable connection parameters.
    Thanks.

  • How do I connect to a terminal server with my mac book pro

    How do I connect to a terminal server with my mac book pro

    Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field.  If that does not work then use the IP address to connect.

  • How can I connect to a windows server from a mac book pro

    How can I connect to a windows server from a mac book pre?

    I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
    I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
    Any help is greatly appeciated.

  • How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

    Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
    Open Find/Replace and click the Object tab.
    Click the Specify attributes to find button to the right of the Find Object Format: field.
    Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
    Click OK
    Click the Specify attributes to change button to the right of the Change Object Format: field.
    Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
    Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
    Click OK
    Click Change All

  • How to change Rendering Extension in sql server Reporting Services based on User Permissions

    Hi,
    I want to provide SQL server reporting services rendering extension based on user Access.
    For Example
    User1 can have options of Rendering to EXCEL and PDF
    User2 can have a option of CSV
    i read one article which is useful for report basis rendering extension changes. but i want to give user basis rendering options.
    http://www.mssqltips.com/sqlservertip/3569/how-to-change-rendering-extensions-in-sql-server-reporting-services/?utm_source=dailynewsletter&utm_medium=email&utm_content=headline&utm_campaign=20150406
    Thanks in advance.
    GVRSPK VENI

    You can use a data driven subscription for that
    Maintain a table with rendering extension information for various users ie their AD user login. Then setup a data driven subscription based on table values
    You will be creating a dataset with query for retrieving userid as well as rendering extensions and then just set the value as Get value from database for  render Format and To properties 
    For more details refer
    http://beyondrelational.com/modules/2/blogs/101/posts/13460/ssrs-60-steps-to-implement-a-data-driven-subscription.aspx
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

    Dears,
    I have IBM Flex server with built in storage,  
    HOW to to make Cluster between two  server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
    If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

    Microsoft Failover Clusters require shared storage.  If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com).  If you
    use third party software, you will need to follow their instructions for configuring the environment.
    Questions on how to configure Exchange environments are better asked in an Exchange forum.
    .:|:.:|:. tim

Maybe you are looking for

  • How to backup to two different external harddrives

    Hi folks, i want to backup my Leopard Server with Time Machine to two different external FireWire HDs. Is this possible without having to switch the Volumes manually?

  • How to enter negative value in a currency field

    Hi Experts, Please help me how to allow to enter negative value in a field on report selection. I created a currency field on a report selection using PARAMETERS. I can enter positive value in the field. But, I cannot enter negative value. SAP shows

  • Keeping Reader Toolbar Hidden in Internet Explorer

    How do I keep the Adobe Reader Toolbar hidden after I hide it when viewing a PDF in Internet Explorer? If I right click on the toolbar and select the Hide Toolbars Option, the toolbar is hidden for the current PDF.  But, the next time I navigate to a

  • Assigning discount threshold to a position in org. model

    Hello,       I need to assign discount thresholds (as a percentage value) to a position in org. model to facilitate discount approval process for quotation. Can this be done by using the attributes section of the position? Please provide your inputs.

  • Scope of local modules

    Many articles concerning PL/SQL best practices promote the use of local modules for code clarity. I am wondering how this affects testability due to limited scope (we use utplsql.) For example, if I write PROCEDURE A IS PROCEDURE B... PROCEDURE C...