How to change cross dissolve alignment in PP CC 2014??

I've updated to Premiere Pro CC 2014 and now I can't change the alignment on my cross dissolve from the effect controls panel - or anywhere else for that matter. Is that function gone in 2014?? Or did I miss something?
Screendump from the effect controls panel:

I dont understand this part ( what am I missing?)
'm looking to keep the length of the dissolve and skip ahead or rewind with each clip
but ...
This method only changes the length of the dissolve one end at a time
Dragging the Transition Box in the Timeline works like this.
Drag one end and the total duration extends or contracts.
Shift Drag either end... affects that end only.
Drag in the middle of the box ..repositions (off centres) the transition (Assymetrical).
All adjustments are shown in a Info Box overlay.

Similar Messages

How to change the text alignment of an adf table column

Hi everyone
I have a read only adf table that uses banding. What I want to do is change the text align property of one of it's columns but the task seems not at all trivial.
I tried entering a value for the text-align property in the inline style of the specific af:column tag and failed. I then tried to do the same for the af:outputText element inside the column but still nothing worked. I even created a css style and changed the StyleClass attribute on each or both elements without any luck.
Can anybody shed some light here ...
Thanassis

Specify the text-align in a css.
Re: styling column headers in adf table

How to change the closed caption display in cc 2014

Hi since the new CC update they the option to change the closed caption seems to be removed. Currently it is set to teletext level 1. But i would like to change this to CEA-708. In the older version of cc u could change this by clicking the program monitor settings but this option is no longer available.
The adobe site stats Adobe Premiere Pro Help | Closed Captioning "You can select the captioning standard for a caption clip loaded in the Source Monitor. In the Source Monitor panel pop-up menu, select Closed Captioning Display > Settings. For example, you can select CEA-608, CEA-708, CC1, CC2, and so on. You can toggle the Closed Caption display on and off."
But this button is now gone.
Any help?

The button icon you show above is for enabling/disabling closed captions display. To access the Program Monitor's Settings menu, click the wrench icon to the left of the Duration display.
If you want the Closed Captioning Display button back, click the plus sign in the monitor's bottom right corner and drag the button to the button bar.

How to change the default left alignment setting in Word 2010 professional (personal use)

Hi, I use Word 2010 Professional for my personal use at home, and somehow the default setting for the left alignment in a new Word document has been changed to a hanging indent at .25. So every time I open a new Word document, the left margin
has an indent setting. I have to change it to 0.0 every time, which is annoying.
I've tried to go into the "Options" section, under "Custom Settings" to de-select an auto left margin indentation, but I can't seem to find an option to do that. Can anyone please tell me how to change this setting in the master Word 2010 template,
so that every time I open a new doc, the left side is aligned at the 1" margin with no hanging indent?
Thank you.

Page Layout-Page Setup-Margins-Custom Margins...-change your setting-Set As DefaultStay Hungry, Stay Foolish

Align stroke. How to change it?

Hello developers!
How to change "align stroke"?(outside, inside or center)
Thank you

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

How do I create a cross dissolve when working with an Image with the Multiply effect applied?

FINAL CUT PRO X
I've added the Multiply effect to an image as it is black and white and I need it to blend in with the background - when I try to add a cross dissolve onto the image to fade it into the background the image will not dissolve with the applied effect, instead, during the dissolve the image is black and white, once the dissolve is complete it then applies the Multiply effect...
How do I make this so the multiply effect is applied during the dissolve?

Try making the clip with the Multiply Effect into a Compound Clip and then adding the Dissolve.
Andy

Aligning two cross-dissolved images in Canvas

I have two head-shot photos that are covered by a cross-dissolve. The effect creates sort of a "poor man's" morph between the two faces.
After rendering the sequence, the overlapped images are easily distinguished in the Canvas at the mid point of the dissolve.
However, when I move either image in the Motion tab, in order to better align the facial features from each photo, the Canvas images become double images of themselves and it is impossible to line the two up. Re-rendering makes them clear again until, of course, I move either image.
Is there an easier/better way to reposition images while simultaneously checking their alignment during a cross-dissolve?

I would try a hand-made cross dissolve. Instead of using the standard transition, in your case you have better control if you move either clip to a different video track (say: clip2 to v2), than drag the right hand of clip1 in v1 by say 0,5 sec to the right, and left hand of clip2 in v2 by 0,5 sec to the left. Now the two clips overlap by 1 sec and using the opacity keyframes you can fade down clip1 and fade up clip2 (1 sec each) to emulate cross dissolve.
And now you can play with Motion on either clip without need for rendering (if you HW allows it...)
Piero

I can't change the length of an cross dissolve in iMovie

I can't change the length of a cross dissolve in iMovie 10.0.1
I do the right things but 1.0 second stays 1.0 second
Who has the solution of this problem?

»Pass Through« indicates that Adjustment Layers will affect lower Layers outside the Group and that contained Layers with different Blend Modes will affect Blending with underlying Layers outside the Group accordingly.
If you change it to Normal or any of the other Blend Modes everything contained within the Group will basically act as one flattened Layer and Adjustments only affect the Group’s pixel content.
Could you post a screenshot of the document with the Solid Color Layer’s Color Picker and the Layers Panel visible?

How to change Font size and alignment in Appraisal document - Font settings

Dear Eperts,
We are working on 360 Appraisal. Can Any body explain how to change the fornt size and allignment (text wrapping to wndow size) in Appraisal document.
Thanks and Regards,
Ajaykumar

Hello Ajaykumar,
if I am not completely mistaking the 360° Appraisal uses the Adobe Forms.
In this case the font can be set in the Adobe Live Cycle Designer by selecting "Palettes" -> "Font".
Here is a discussion which addresses this question, and also contains a link to how to handle Adobe Forms:
Adobe Print Form - Change Font Type/Size | SCN
Best regards,
Laszlo

How do I get Cross Dissolves to work even when there is plenty of media

I have 10 minute movie with many different video segments. I have added cross dissolves throughout the movie, and many go in with no problem, I just drag and drop them, and then I can easily drag the dissolve longer or shorter. However, on about half of the clips, I can't add a dissolve. There is plenty of media available (most clips are about 10 or 15 seconds long). It won't let me drop a cross dissolve at all. Sometimes, it lets me drop the dissolve, but only on one of the two clips I want it, and when that happens, the dissolve is very short and it won't let me extend it. Again, there is plenty of media available, and it will let me use the dissolve on about half of the clips (all the clips are pretty much the same--same source, same file type, same length, etc.). I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?

+I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?+
You don't have enough media.
Move your IN point a few seconds into the clip, and then drop it into the timeline.
Now apply dissolve
Niel

How does one create a video cross dissolve without an audio cross fade in FCP-X??

Greetings:
This is a no brainer in 'legacy' Final Cut, but I am completely stumped in FCP-X. Situation is thus:
Main story line consists of a speaker. I would like to drop stills onto/into the storyline while the speaker continues uninterrupted. I've tried connecting to the storyline, overwriting to the storyline, creating a secondary storyline, creating transitions with available media, with full overlap -- all for naught. The outgoing bits of the cross dissolve have a weird audio hiccup that I cannot get rid of. I simply want to fade a still in and fade it out (I appreciate I could keyframe opacity with a still connected to the main storyline, but that seems slightly nuts -- this should be a keystroke). I am assuming I'm missing something -- possibly something really simple, so, apologies for being a dolt, but I could really use a hand here.
Many thanks
longstrider

Detach the audio using Control-Click. The audio will then have its own fade that you can adjust. If you want to cross fade audio clips just overlap another audio clip by placing it below the first audio clip. Overlap can be adjusted for the amount of time you want for a dissolve. You can also pull the fade control in the vertical middle of the end of each audio clip to make an audio fade in/out. Holding that fade control while pressing the Control key gives you the option to select different types of fade curves. Hope this helps.
stephen

Motion Generator - Cross Dissolve Changes Speed

Wow, this software is really, really buggy.
I have a simple sequence I created in Motion 5 and published as a generator. I bring it in FCP X and it's at about 60% size (already created a thread about that). I just do a Transform and enlarge it to work around this bug.
The new bug I just discovered is when I add a Cross Dissolve transition to fade out the Motion 5 sequence, it makes the timing of the Motion 5 sequence a lot faster. So the zoom blur treatment and the text animation sequence from Motion 5 get sped up about 200%.
Anyone else getting this?
Thanks!

OK, so it appears that what is happening is if you trim a Motion generator in FCP, it retimes it so that all of the sequence happens in the shorter time, since you have cut it, versus elimating anything in the sequence that happens beyond where you trimmed.
So does this mean I have to go back to Motion to do a simple thing like trim a Motion sequence? If so, what is the point of merging Motion sequences with FCP X footage? It seems it would be easier to just take all the footage into Motion and then export that out as a QT ProRes movie and import that (like I did with AE back in 1995).
Thanks!
Scot

Premiere Pro CS 5.5 can't do a simple cross dissolve with MPE enabled?

When adding cross dissolves to a project that I'm working on, I've come across an odd problem. I say odd because this should be dirt simple, but Adobe seems to have messed this up. Please advise on any solution or work around, or perhaps simply see if you can recreate the issue so we can get Adobe to fix this.
Problem:
Cross dissolves transitions don't seem to work consistently in cs 5.5. Note: I know how transitions work, and I'm not doing something stupid like trying to apply a transition to a cut without actually removing any video between the two clips (assuming the clips came from the same source video.). I'm able to recreate this issue on two different systems with premiere pro cs 5.5 by doing the follwing:
Create a new project and and sequence with the default settings.
Enable the Mercury Playback Engine if it isn't already enabled.
I import the Wildlife.wmv video that comes default with Windows 7 systems.
Drop it the video into the sequence.
Ripple delete about a 2 second section of the video. be sure to do this in the first half of the video, and make sure the the video changes the scene during this period so that you will notice the cross dissolve transition when it is applied.
Apply the default cross dissolve transition to the edit.
Review the edit. For my test, this edit always seems to work fine.
This is a screen capture of the working cross dissolve transition.
Now let me show you what happens when I do a similar edit somewhere in the second half of the video clip.
As you can see, for the duration of the transition, only the clip to the left is shown. At the end of the transition effect the program out preview jumps to displaying the clip to the right. There is no transition.
Additional notes:
This second transition works fine with MPE disabled, but because if of my other problem http://forums.adobe.com/message/3725642 that I have with MPE disable it is not a viable work around.
Help?
-Ted

I too am experiencing this issue. AVCHD footage, GPU Acceleration, trying to apply a cross dissolve, and instead it randomly seems to see it as a simple cut. The Cross Dissolve is simply ignored... Adjusting the footage length, removing the CDissolve, re-rendering, etc. have no effect. For whatever reason, in that specific location on the timeline, a cross dissolve with GPU acceleration is impossible. Yet, in other sections of the timeline, it is just fine.
(The Fast Blur trick mentioned above worked (Thank you!) however, when I changed my playback resolution on the screen display, that broke the fix. Deleting the fast blur, and applying it to the clip on the other side of the cross dissolve, re-enabled the work around)
I also see an issue when a clip changes in the timeline, (cut from one piece of footage, to another) the video will begin to studder, dropping frames. Framerate seems to drop to about 2fps. To get smooth playback back, I have to pause and resume the playback. Even if this is done very very rapidly, it still fixes the playback issue. it's just really annoying to have to constantly stop and resume playback everytime a video clip changes in the timeline.
I have a dedicated hard drive for video, and a dedicated mirrored array for the OS. the video drive is a 7200rpm SATAII drive, and I'm using AVCHD footage. I really don't think it's a disk speed issue... particularly as pausing and resuming (even if you do it as fast as you can possibly hit the keys) fixes it. I'd rather not spend the $ to set up a RAID 10 for video, if I can avoid it and particularly if it's not needed.
-Jason

Cross Dissolve, Dip to Color not working

Hello. I am having trouble applying Cross Dissolve and Dip to Color to the transition between to separate clips. It works fine when I am transitioning between two clips originating from the same raw captured file (e.g. between two pieces I cut out of Raw 1), but I am unable to apply the transition to two clips from separate raw files (e.g. between a piece of Raw 1 and a piece of Raw 2).
The timeline only allows me to place the transition just AFTER the cut between the two clips, rather than straddling the two for a smooth fade. Any idea why this might be? Thanks in advance for your help.
Using Final Cut Pro 5.1.4, Tiger 10.4.9

Enough handles?
#1 Transitions "Insufficient Content"
Shane's Stock Answer #1:
You need to make sure that your clips have enough media (called 'handles') at the beginning of the incoming clip and at the end of the outgoing clip for the transition. For example, if you have a 1 second (30 frame) dissolve, your in and out point need to be at least 15 frames from the edge of the clip.
What you are running into is that you are marking an out point at the end of a clip then adding a cross dissolve, say 20 frames in duration. Since the dissolve is centered on the cut, it will start 10 frames before the cut, and try to go 10 frames AFTER the cut...which it can't do.
What you need to do is plan how long your dissolve will be and back-time your cut so that it works.
a full 1 second crossfade reaches 15 frames into each clip. So, if you want to change a cut to a crossfade, there has to be at least 15 additional frames of each clip.
Say you're trying to crossfade from one clip into the very first frame of a second clip. FCP cannot 'create' 15 more frames of the second clip to do a crossfade. If they're not there, you're out of luck.
FCP has to extend the end of your first clip by 1/2 of your transition length, and the beginning of your second clip by 1/2 of your transition length, so those frames need to be in your system. The nature of a crossfade is mixing two clips together.
Shane

Cross dissolving in Final Cut Pro 10.0.8

Hi there, seriously struggling with cross dissolving in Final Cut Pro 10.0.8.
The problem is simple: I don't know how to do it, and I can't find the option to do it. Right clicking doesn't give me the option to 'Add Cross Dissolve'. I eventually found it by clicking 'Lift From Storyline' and then clicking 'Add Cross Dissolve' but I can't navigate it at all...I'm trying to cross dissolve from one clip to another without it fading to black in between. Can someone help me, or point me in the direction of a tutorial? I've been looking for ages now and not found one that I can use!
This is how it looks at the moment...The clip on the left fades to black and then the next clip starts really suddenly, neither of which I want to happen, but this is the closest I've got after hours of trying to make sense of it!

Lift From Storyline is not what you want, as you've found.
Command-T
Highilght the In or the Out point of a clip, the default transition (Cross Desolve) is applied to that edit point.
Hiighlight a whole clip, or series of clips together, the default transition is applied to all In and Out points for all selected clips.
In the Transition Browser, right-click a cilp and select "Make Default Transition" to change which is the default.
In the Transition Browser, select the "All" catagory in the left column, the first one listed is the one currently set at the Default Transition.
You can also drag-and-drop from the Transition Browser, or highilght an In or Out point, or a single or series of clips, and double-click a transition in the browser.

How to change cross dissolve alignment in PP CC 2014??

Similar Messages

Maybe you are looking for