How to change customer AR GL Number

How can I change customer Accounts Receivable GL account number on the customer master accounting tab.
Seems system does not allow me to change that account number to another AR number even when there are no open AR invoices for that customer.
Tkx
Shawn

Hi,
Please you already enable option "Perm&it Change of Control Accounts" in the Sales G/L Account Determination. Otherwise, it is impossible to change control account other than what already set in the G/L Account Determination.
Cheers

Similar Messages

I have recently changed networks to giffgaff but now my voicemail button doent work does anyone know how to change the voice mail number so it works again? thanks

i have recently changed networks to giffgaff but now my voicemail button doent work does anyone know how to change the voice mail number so it works again? thanks

GiffGaff are not a supported UK Apple carrier .That is probably why you have lost Voicemail they are a cheap carrier who provide minimum services ,do they even offer voice mail
Go talk to them

How to change customer reconciliation account in ECC6.0 without new GL fun?

Hi,
We have to default profit center for one customer without disturbing setup for other customer.
Hence we have decided to change reconciliation account of that customer and will assign to acount with default profit center in 3KEI.
Now my question is how to change recon ac of customer having too many line items for that customer.
Please an I get help on this?
Please can you provide steps to hange recon ac by transferring balance to other account?
How we can deal with open/clear line items of that customer.
Thanks

Hi
A rather simple way will be to set up a simple substitution rule for that particular customer in GGB1. You can write a simple substitution rule as under
Prerequisite:
BKPF-BUKRS=1000 and BSEG-KUNNR=1001112
Substitution
BSEG-PRCTR =101332
You should activate this rule for entire Document
Regards
Sanil Bhandari
Edited by: Sanil K Bhandari on Jun 13, 2011 12:22 PM

How to change subscription of Online Number

Hello,
I purchased an online number and the subscription was for 3 months which is charging me 18$ per three months, now I would like to acquire that number for an year and need to pay the whole amout at once to get discount as well but I am not seeing how to change my subscription without releasing my number
Can someone please help.

Veneer87 wrote:
(Problem is, If i cancel the current subscription and buy a new yearly one, India is not included in the new subscription)
Hello
From your account it appears that most of your calls are to India. In that case it may be better to stay with your current Subscription as to change it you wound lose being able to call India and have to fund those calls with Skype Credit.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Question on iCloud accts: I have my iPhone and iPad on one account, but my Mac is set up on my old mobile me acct. Can't figure out how to change an iCloud account number on my Mac so I can sync all three.

Question on iCloud accounts: I have my iPhone and iPad on one iCloud account, but my Mac is on my old Mobile me account. Can't figure out how to change my iCloud account on my MacBook Pro so all 3 are synced.

First, open System Preferences > MobileMe and log out. Then, open  > About this Mac and see Version. If you see 10.5.x or 10.6.x, see > http://www.apple.com/osx/specs If your Mac is compatible, upgrade to Mac OS X Snow Leopard 10.6.8 and purchase OS X Mountain Lion.
When you have upgraded, go to System Preferences > iCloud and follow its steps

How to change the listener port number on a standby database

i want to change the listener port number from 1525 to 1545, which is running on a standby database.
i did the following steps and got some error.
1. i stop listener and modfy listener.ora
2. i login in standby DB and issue 'alter system set local_listener='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';'
3. i login in dg broker and issue 'edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';' and a error coming out ORA-16703: cannot set the property while the database is enabled
4. then i disable database
DGMGRL> disable database 'ssmscs';
5. DGMGRL> edit database 's1' set property 'LocalListenerAddress'='(address=(pro=tcp)(host=10.10.10.10)(port=1545))';
Error: ORA-16541: site is not enabled
Configuration details cannot be determined by DGMGRL
what can i do ? can anybody help me out? thanks in advance.
Edited by: user1835127 on Nov 19, 2008 2:09 AM

Hi
You have to edit the following files in $ORACLE_HOME/network/admin or $TNS_ADMIN/ :
In your listener.ora on your standby
MQ_LIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = superman.dk)*(PORT = 1524))*
TNSNAMES.ORA (on your primary and standby)
MQ_LIST =
(DESCRIPTION =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = superman.dk)*(PORT = 1524))*
(CONNECT_DATA = (SID = MQ_LIST))
after that do
lsnrctl reload

How to copy Customer Sales Order number to Purchase Order for 3rd party sal

Hi experts,
We are doing third party sales. So once we create Customer Sales Orders manually via VA01, users also manually create Purchase Req for it.
We do not automatically create PR from Sales Order, as this is not my clients requirement. So we don't use item category group BANS in the material master.
In the item level in the PR under the Contact Person tab, the creation indicator shows "V Sales & distribution document". Once PR is created this updates the PR number under the item level Schedule lines in the Sales Order.
After PR creation, we run a job to create PO's.
But the new requirement from the client is to automate this PO creation thru EDI.
Our SAP is 4.6C & the Idoc type we use is ORDERS05 & Message Type is ORDERS. We are using EDIFACT std.
Once I get the idoc xml file for this PO, I find that my Customer PO number (from the Sales Order) & also the Customer Sales Order number is not copying to the xml output.
Please advise what needs to be done inorder to have it.
This will be great help & I will reward for the answers !
Rgds,
Pri

Tables are related.
MATNR
WERKS
MBDAT
LGORT
CHARG
etc fields are common in both VBBS and VBBE.
May be you can generate a condition a fetch data using this.
I hope it helps.
thanks

How to change custom aspect ratio in Lighroom 5.

I am having trouble changing custom aspect ratio in lightroom 5. I can change it in 3 but it doesnt work in 5?

Custom aspect ratios are just that, ratios. There is no size involved. You control size in the print module or in the export dialogue. There is no provision in Lightroom itself to change the size of the image. Lightroom imports the image taken by the camera and displays all the pixels. Any sizing that you want done is enter your control using either Lightroom features. The original image size cannot be changed.

How to change Custom widget title

Hello experts,
I have a widget titled as Custom Widget.How can i change
this title ?

Hello,
By default SAP Widget Foundation accepts connections only from localhost, but it can be changed by removing line
<Set name="host">localhost</Set>
from middleware.xml in C:\Documents and Settings\<username>\SapFoundation
After this modification, host where widget tries to connect should be changed in widgets from 127.0.0.1 to your server host
Foundation at the moment is designed as component to run on the same box as widgets as it is responsible for Y! widget autoupdate and can use SSO with Secude
Eriks

How to change the unique reference number of a EUL in Discoverer 4i

Hi,
My Discoverer version is 4i which comes default with EBS 11i.
Now i have created a New Custom EUL Using Database Exp and Imp.
According "http://docs.oracle.com/cd/B25016_08/doc/dl/bi/B13916_04/maintain_eul.htm#i1008612"
"if you use the database export and import utilities to copy an EUL, the new EUL (including its reference number) will be identical to the original EUL"
I have to change the Reference Number of New EUL.
This can be done by
start d:\<ORACLE_ HOME>\discoverer\util\eul5_id.sql
But i could not find this sql in 4i Discoverer Home.
/8.0.6/discwb4/util
Can any one help me in finding this.
Thanks in Advance
Krishna

Hi Krishna
The file is not called EUL5_ID.SQL in Discoverer 4i, I believe it is called EUL_ID.SQL.
Oracle only introduced the EUL5 notation when Discoverer 10g was released. This has continued on into 11g.
Why not go straight to 11g? Discoverer 4 is old and no longer supported.
Best wishes
Michael

How to change customer specific status of employee?

Hi All,
I would like to change the Customer Specific Status of employee.
In PA30/PA40, the customer specific status is in display mode.
How to do it.. Any transaction code?
Regards
Pavan

Hi Pavan,
All three status indicators (customer defined, employment, special payment) can only be assigned at the time the action is created (cannot be changed thereafter).
Do the creation through :
SPRO : Personnel Management -> Personnel Administration -> Customizing Procedures -> Actions -> Create Customer-specific status.
Regards,
Dilek

HT204053 How to change the credit card number in a iTunes account?

Need to change credit card number, new card, for iTunes?

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918

How to change Customer Fields in CRM_DNO_MONITOR ALV to texts???

Hi Guys,
I have created some customer fields and added them succesfully to the CRM_DNO_MONITOR via the Badi CRM_DNO_MONITOR. Some fields are drop downs and have F4 value help attached to them.
My problem is that the Key is shown in the result ALV and not the text. The F4 help is available
Can I controll this behaviour???
Or do I have to enhance my implementation of the badi to show the texts or can I make any changes to the append structure of the CRMT_DNO_SERVICE_MONITOR???
Thanks and best wishes.
Abosi

Hi,
i think the best way is to add a new custom field to your append strucutre of CRMT_DNO_SERVICE_MONITOR.
Then you can read the text value with the Key and insert it in this field using BADI CRM_DNO_MONITOR.
So the user can choose himself if he wants to see the Key or the text in CRM_DNO_MONITOR.
By the way, it is not necessary to add this field in your append structure for CRMT_CUSTOMER_H_EXT since it is not necessary to see it in CRMD_ORDER.
Regards,
Christoph

SCOM Alerting : How to change displayed "Has value" number on email to user

Our end users who receive these alerts want to see only a whole number value for Logical Disk with a counter % Free Space
Presently the alert fires -email is sent and the out put that is displayed for "has a value" displays 12.8447532653809
Users want only the whole number 12 - I will even take 12.84
Where or what can I do to achieve this for the customer
Any help would be greatly appreciated
KevinPA17111

Hi,
Use this custom MP by Kevin Holman
http://www.systemcentercentral.com/pack-catalog/logical-disk-free-space-addendum-mp-for-windows-20032008/
Disabled the current disk monitors in the MPs you are using and use those in this MP
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

How to change Customer from "Ship-To" to "Sold-To" party

Hi Experts!
I have an employee who created a customer via VD01 as a ship-to customer, when it was suppose to be a sold-to. I tried looking in VD02 if I can change the account group to sold-to, but having no luck with that. Can anyone please assist? Urgent! Thank you in advance!
WC

Hi
Use XD07 Transaction code.
regards
Srinivas

How to change customer AR GL Number

Similar Messages

Maybe you are looking for