How to change daemon (service) start order by systemd?

how to change daemon (service) start order by systemd? I want getty start after all other service have been started.

hoanglan87 wrote:If you do that, you'll not see services messages when booting.
That's the whole point. Once your system's working fine, you don't need to slow your boot down with those messages. You can always get them back by hitting the "e" key (with Grub) and editing the kernel boot line. Unless you've set your time-out to 0, which is probably not a good idea for most of us. Those service messages don't seem to be logged anywhere (although, there's lots of other logging you can enable). Anyway, we're thread-drifting here, sorry.

Similar Messages

How to Change Division On sales order

Hii Guy,
How to change Division on sales order after been save ?
my user wrongly enter division code while creating sales order. the SO already have PGI and not yet been invoice.

Best Practice is to go PGR and then cancel Delivery.Then Go to VA02 and change the Division.
You can customize the Division at Sales Docuement Type by De-Selecting the Check Box of Item Division.It means the division will be copied from the Header Level of Customer Master Data.
Best Regards,
Ankur

How to Change Analysis Services Server for Power View

I can't seem to figure out how to change what SSAS server/instance that is used to build the cubes for Power View items uploaded to SharePoint. I tried changed the trusted servers listed in the Excel Services service application but if I remove the original
SSAS server (which of course is a test server, not to be used for production) and have only the prod SSAS instance listed the reports fail to load with the generic 400 error. Is there another setting that I'm missing?
Thanks,
Kyle

Hi ,
Since this issue is related to SQL Server, I will move this thread to SQL Server forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

.Mac Web Gallery - How to change key photo and order or galleries?

How can I choose which photo is the key photo for each .Mac web gallery? Also, how can I re-arrange the order of the web galleries?

I would really love to see a solution for this too ! Unfortunately I think apple just didn't implement it in Aperture. My .Mac web gallery is about events in my life and it doesn't make any sense to have it sorted alphabetically...
Not being able to simply set a key photo is really annoying too.
The worst is that these two functions are available in iPhoto. All they had to do was copy and paste...
Apple are you listening ?

How to change supplier on purchase order

Entered a purchase order for supplier X but the supplier does not have the item. How can I change the supplier on the purchase order without cancelling it?

Hi............
You cant change the supplier once the document has been punched against. You should cancel it first........
Regards,

How to change date if TECOProdn order is reopened/revoked ?

Dear all,
We TECO the production orders. When we revoke these TECO orders, It takes current date.
We want to keep the old date . How to do this ?
Pl' answer.

Hi,
Use tcode OPU3, select your plant & Order type.
Enter start in the past - 90 days.
Now do TECO & revoke. Check the result.
Regards,
Dharma

How to change plant in sales order???

I have made a sales order which created a purchase requisition. A purchase order has been made with reference to the purchase requisition.
No goods reciept has been made yet.
I want to change the plant and the storage location in the Purchase order, so to be able to recieve the goods in a different plant. I tried doing this from ME22n but I get the message that the sales order has been made with a different plant. If I try to change the plant in the sales order I can not. the field is not possible to be changed.
What should I do?
Thank you in advance

Dear Theodorous,
1)Please check the Material has been extended to the second plant.
2) Assign the second Plant to Sales Org and Dist Channel
If you have any concern revert back the same
Regards
Amjath

How to change price in Sales order using user exit ?

The scenario is - when the user creates a sales order, there has to be an RFC called to another system to get the price of the materials in that system. Then it has to overwrite that price in this S.O.
Which exit in S.O can be used for this and then what processing needs to be done after the RFC call to get price. Like how the price can be overwritten on this S.O ? (Lets say to get price we use some BAPI to the other system). Any help ?

Dear Theodorous,
1)Please check the Material has been extended to the second plant.
2) Assign the second Plant to Sales Org and Dist Channel
If you have any concern revert back the same
Regards
Amjath

How to change system status of order created in IW31

Hello All,
I created a maintenance order in IW31. System status of that Order is like this,
Now i have a requirement to change the system status.
But the BAPI : BAPI_ALM_ORDER_MAINTAIN has option to change user status. Please suggest what i have to do?
Thanks in Advance

EXIT_SAPLBSVA_001 will fulfill your requirement.
Try to change your system status inside this exit.
You will get both User status and System status.

How to change the standard purchase order ???

Hi,
i am trying to change the output form of standard purchase order.for that i copied the standard script/form to my own created script/smart form.i modified it as per user requirement and i have given the same name in NACE>EF>output type>NEU>processing routine..in place of the standard one.and i have also activated the standard program i.e. SAPFM06P.but when i am going to me22n and print preview the previous form format is coming...
if i will create my own smartform then it is difficult for mapping all the fields to me22n...user can not input other fields in me21n if i am giving my print program name in NACE...
can anybody please help me...????
pls reply soon,....
Regards
Amayika

Hi,
Are you sure you have set it for medium 1 (print output) and specify the program, FORM routine, and the Form/Script correctly?
Another reason is the output type is not set up yet at the PO. Go to ME22N and click Messages button (next to Print preview button) and check whether your output type is already there. If it is not, then create one.
Please also check that you have copy client the form/script from development client to test client (SAPScript need this but no need for Smartform) using T-Code SCC1. And the config is configured properly in test client.
Regards,
Teddy

How to Change String Default Sort Order for Table?

I have a RichTable with SortableModel, but all string properties sort as follows:
AAAAAA
ZZZZZZ
aaaaaa
bbbbb
zzzzzz
As you can see upper case is before lower case, however I know I'm going to be told that they need to be like this:
AAAAAA
aaaaaa
bbbbb
ZZZZZZZ
zzzzz
Is there a way I can change / override how this sorts?
Thank you,
Kris

So I think you are saying that I need to create my own wrapper class for String. Then override the compare and equal methods and return this class in my getters and setters?
Or is there a way to tell the String class to use a different method for sort since it would be a global change?
Thank you,
Kris

How to change the Group Sort Order

I'm using Crystal XI version to create a report that has two "Group By" fields.
I understand the sequence (Group 1, Group 2) in which the fields are sorted, however I was wondering whether there is a way to sort by ONLY the Group 2 field.
If this is possible, I would appreciate the instructions on how to do it.
Thanks

Hello Paul,
Crystal will 'tier' all the groups in such a way that Group 1 will always be sorted first. IE:
G1
G2
G1
G2
G2
G1
You can modify the order of the values in each group, but if you want to sort by Group 2 then it will have to be the "outermost" group.
Let me know if this helps,
-Sean

How to change JNDI service provider for EJB's?

I need EJBean's home interface to be bound to another JNDI provider, not Weblogic.
How can I do it?
The most simple solution is not working: to specify <jndi-name> in weblogic-ejb-jar.xml
for bean as "xxx:bean_name".
By JNDI rules for such names context factory with name com.sun.jndi.url.xxx.xxxURLContextFactory
will be used. But for Weblogic this does not work. An exception is thrown during
bean deployment -
javax.management.MalformedObjectNameException: ObjectName: Invalid value -> xxx:bean_name
at javax.management.ObjectName.validateAndAdd(ObjectName.java:440) at javax.management.ObjectName.initObjectName(ObjectName.java:409)
at javax.management.ObjectName.<init>(ObjectName.java:254) at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:196)
at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:90)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
at weblogic.ejb20.internal.BaseEJBHomeMBean.<init>(BaseEJBHomeMBean.java:33) ......................

This is not an answer on my
question - My questions was: how to force a Welogic EJB Container to BIND EJBean's
home interface to another JNDI Service provider, not Weblogic.
But you wrote how to use JNDI in general - I already know how to use it :)))
Phil.
"VSK" <[email protected]> wrote:
Hi
Have a look at the code below
private Context getInitialContext () throws NamingException
String from = "CtxHelper::getInitialContext ";
String webLogicHostUrl = t3://SERVERNAME:9001
Logger.debug(from, "Begin Method", 3);
Hashtable h = System.getProperties();
h.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory
h.put(Context.PROVIDER_URL, webLogicHostUrl);
return new InitialContext(h);
} //end getInitialContext
This way we will get the InitailContext and then do a jndi lookup using
the
Context object as follows
ctx.lookup..........
Now in the above code replace weblogic.jndi.WLInitialContextFactory by
ur
provider.
Hope this helps.
-VKS
"Phil Peshin" <[email protected]> wrote in message
news:[email protected]...
I need EJBean's home interface to be bound to another JNDI provider,not
Weblogic.
How can I do it?
The most simple solution is not working: to specify <jndi-name> inweblogic-ejb-jar.xml
for bean as "xxx:bean_name".
By JNDI rules for such names context factory with namecom.sun.jndi.url.xxx.xxxURLContextFactory
will be used. But for Weblogic this does not work. An exception isthrown
during
bean deployment -
javax.management.MalformedObjectNameException: ObjectName: Invalidvalue -> xxx:bean_name
at javax.management.ObjectName.validateAndAdd(ObjectName.java:440)at
javax.management.ObjectName.initObjectName(ObjectName.java:409)
at javax.management.ObjectName.<init>(ObjectName.java:254) atweblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:196)
atweblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelega
te.java:90)
atweblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate
..java:83)
atweblogic.ejb20.internal.BaseEJBHomeMBean.<init>(BaseEJBHomeMBean.java:33)

How to change system/service groups in ESB through build file in Antscripts

Hi All,
i have a proublem with Ant Scripts .
I Create a "IClickSystemESB" process that will define different systems for the project. and Create "IClickServiceGroupESB" process This will define different service groups under the systems for the project. and then Create a TestSysServiceESB process This process should use the system/servicegroups.
During deployment of TestSysServiceESB the build file should be able to change the system /service groups to which the process is attached.
Anyone can help me.
Regards
Hari
Edited by: user10222248 on 19 Feb, 2009 3:02 AM

Check out configuration plan feature in soa suite 11g. One of the reference is here @ http://biemond.blogspot.com/2010/02/web-service-references-and-soa.html

SAP GUI 7.20 PL7 - How to change the default Start Menu shortcuts location

I would like to change the SAP GUI shortcuts .lnk file location in the start menu.
Example. The shortcuts to be installed to Start Menu > Production > SAP Front End > SAP Logon

Thanks for the help but I did not get the answer provided.
I am trying to create a package with SAP Installation Server Admin tool and need to change the shortcut locations when the package is installed.
By default nwsapsetup.exe /package="xyz"
installs all shortcuts to start menu > programs > sap front end
in Windows XP.
I want this to be in Start Menu > Production > SAP Front End
I need to deloy the package to Windows XP.
COuld you pls help?

How to change daemon (service) start order by systemd?

Similar Messages

Maybe you are looking for