How to change date for Compensation Package Offer (IT0706)

I try to change date for an existing record in IT0706 to a later date, however system prompted "The compensation package was already activated. It can not be changed" As I checked, the record status is "Activated". Can anybody help to advice on how to change the date ?
Thanks~

Hi Kishor...Thanks for reply...
But i need to change my precentation variable date formt...
i need to write one text like: 'Year to dd/month/yy' in one column formula..
So how can i achieve it..

Similar Messages

How to fetch last changed date for Header in me22n?

Hi Experts,
I need to create a report for PO, where I have created one screen tab in Header level(customer data), therefore I need to fetch last changed date for header , I must mention that I do not want last changed date for item level, only for header last changed date is required.
Kindly assist me on this.
Thanx
Shireen

Read table CDHDR (object "EINKBELEG") and CDPOS (look for table name EKKO), keep the last CDHDR record with "EKKO" data actually changed.
Regards,
Raymond

How to change workflow for expired qualification in HR Module

Hi,
My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
I have serached sap help but i am not understand please below mention URL for SAP help
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
Please explain step by step how to trigrred workflow for expired qualification?
Please this problem is high and try to solve it.
Thx!
Sachin

Hi,
Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
Hope I am clear and this helps and if you need more details, reply.
venu

Sales Order creation/ change date for the items

I have a unique scenario and i need to get a Report for this
A sales order is created for 4 line items.
Out of these , for 2 line items a delivery is created. I need the sales order creation date and time for these 2 items in a custom report
Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
Also another scenario is the 2 line items go for back order and when we get stock at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
Can any one please suggest how to get this data from the scenarios?
I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes). You can explore these two tables.
thanks
G. Lakshmipathi

Changed data for OM infotypes

Hi All,
Could anyone let me know if there is any sap standard program which will give all the changed data for OM related Infotypes? I know we have some idoc types which can do this, but I am looking for some standard program.
Please help.
thanks
shyam

Hi Suresh,
Thanks for the information. But I am unable to see any documents in the table T77CDOC_CUST even though I made some changes to the OM data for a particular object. I see that there is a SWITCH in the above table which needs to be activated..I think in my system it is not active..So could you please let me know how can I activate this?
Many thanks

How to change date format in select-option (mm.yyyy).

Hi,
Plz, How to change date format in select-option (mm.yyyy).
in my selection screen date type selection-option is there ,when i am enter date it's taken dd.mm.yyyy format,but i want mm.yyyy format.
how to set that .
Regards,
Kk.

sorry
parameters : pmonyr type spmon or
select-options : sspmon for PGPL-spmon .
or what table ccontains spmon.
regards
shiba dutta

How to change date format in BR?

Hi all!
Does anybody know how to change date format in BR?
I created global variable with type DateAsNumber and usage type run-time promt and used it in BR
Then I launched a BR on the form and chose necessary date. Date stored in MM/DD/YYYY format, but I need DD/MM/YYYY.
I tried to change format through Planning but then I recieved uncorect result(for instance, I selected 4(April)/14/2009 but it was stored as 4/02/2010)

Hi,
the date is always stored the same in Essbase. I think it's YYYYMMDD.
You can change the format you enter the date in webforms and business rules by changing your planning application settings (Preferences->Display Options).
Cheers.

How to bring data for newly aciated datasource in a Application componenet

Hi ,
i have 2 data sources(application component 11) are active in production system. and delta load is running for them.
Now we have a requirement that we need to activate the 3rd datasource in the same application component 11.
so, how to bring data for the newly acivated datasource. Do i delete the setup table data and again run statistical setup and run the init for the three data sources?
how to do?

Hi,
To bring the data for the new data source you need to delete the data from setup tables and need to fill up again. before filling up the tables, its better to load the delts for other 11 application components data.
Your deltas will come from delta queue, by deleting the setup tables, you will not impact your delta loads.
So just fill up setup tables and run your init package. it will extract the data.
Thanks
Srikanth

How to change data type of attribute in caf

hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.

Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

Creation and Change Date for Tcode and Function Groups

Hello All,
I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
regards,
Mahesh

Hi,
TADIR and TRDIR is the tables where you can find all these data
Regards
Sudheer

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

How to change data format from MM/DD/YYYY to DD/MM/YYYY

HI,
How can we change data format from MM/DD/YYYY to DD/MM/YYYY in Prompt and Report Level in obiee 11g.
Please help me ont this.
Thanks

Hi,
In Prompt:
Try using EVALUATE function.
Eg: Evaluate('TO_CHAR(%1,%2)' as character(30),"D5.Times"."Day Date",'DD-MON-YYYY')
Report level:
Try this in the column formula-
Evaluate('TO_CHAR(%1,%2)' as character(30),"D5.Times"."Day Date",'MM/DD/YYYY')
(or)
EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 30 ), "Dim- Date".Start Date, 'MON-YY')
http://108obiee.blogspot.in/2009/03/how-to-change-date-format-mask-in-date.html
http://obiee-bip.blogspot.in/2011/08/customizing-obiee-calendar-display.html
Some other methods.
Metdhod 1:
'Save System-Wide Column Formats' Option
Check this.
http://siebel-essentials.blogspot.com/2010/10/11-obiee-11g-tips-9-system-wide.html?m=1
Thanks
satya

Table that contains the change date for every cost element

Hi everyone!
Can anyone please help me find a table which contains the change date for every cost element?
Thanks,Jess

If you basically want to find out if anyone changed the cost element, you need to use transaction KA05 and enter the cost element and controlling area.
This would actually bring you whatever field was changed and on double clicking give you the actual change and the date on which the change was made.
Problem is this change date is actually the creation date of a change document which is in the table CDHDR.Its not like the change date is on any master tables.
Hope this helps
Deepa

How to change date format in OBIEE

Hello
I have a need to change the date column to a varchar column in OBIEE..
The date column stores data in the format of 'YYYY/MM/DD', I need to change this to a varchar column with this format 'YYYYMM'..
Since I am pointing directly at the transactional database, I can't make any changes at the database level, so I will have to do it in OBIEE layer, any ideas how it could be done?
Many thanks in advance!

hi user,
Refer : http://varanasisaichand.blogspot.com/2010/01/how-to-change-data-format-to-our-custom.html
http://varanasisaichand.blogspot.com/2010/05/evaluate-function.html
Thanks,
Saichand.v

How to change date for Compensation Package Offer (IT0706)

Similar Messages

Maybe you are looking for