How to change decimals in ECC6.0

Dear all
our one of the client facing a serious issue relating with decimal place,
earlier our client using two decimals places  in ECC.6.0, but later on our client decide that at least they need 3 decimals, for tasting purpose we changed decimal place in global setting (OY04),and we changed two decimals to 3 decimals.
but later on we come to conclusion that for current fiscal year we will continue with 2 decimals,
but when we are going to change again to two decimals system is not accepting, it showing in 3 decimals,
moreover in decimal place dropdown list we wont have option for two decimals, in this dropdown we have option for 1,3,4,5
now we need 2 decimals again so please help to rectify.
Regards
SYED

Hi, you have the passed ”the point-of-no-return” and I am wondering if you have read the serious notes when you setup TA OY04.
Anyway – you question can’t be done. It’s not possible. You must create a new company code & currency and do a “take-over” from the damaged company code including all the necessary setup from the other modules.
2-3 years ago was I involved in a “rescue mission” where the topic was the same in a 4.7 200 system! We created a test system as a copy of the productive system and in the test system did we try to “recreate the figures of the company code” together with SAP. The conclusion was – it can’t be done!
Message was edited by:
        René Vestergaard Nielsen

Similar Messages

  • Purchasing 11i: How to change decimals for unit price of BPA?

    Our standard purchase orders use 5 decimals.
    Our Blanket Purchase Agreements use 9 decimals and this creates some problems for us. How can we change this to also work with 5 decimals?
    I assume it is a system profile? But i cannot find such a profile?
    Please help
    Regards
    Johann

    Moderator message - Cross post locked
    Rob

  • How to change Virtual interfaces in SE80 for a web service under ECC6.0?

    hi
    I find a article, "Changing The Function Interface of Web Service Enabled Functions"
    http://www.dataxstream.com/2009/11/changing-the-function-interface-of-web-service-enabled-functions/,
    But, i cannot find the "Virtual interfaces" menu item under SE80, because its example is ECC5.0, my SAP is ECC6.0.
    So, anybody can tell me how to change it under ECC6.0?
    Thanks a lot.
    Edited by: CSDN2008 on Mar 18, 2010 12:23 PM

    Hi,
    Please share your solution here as I am having the same issue.
    Thank you
    Muthaheera

  • How to Change Source system type of ECC6.0 in BW system

    Hi BW Experter,
       I connected ECC6.0 PRD system with BI7.0 PRD system  , the connection is successful,
    but the source system type of ECC6.0 PRD is not collect . The ECC6.0 PRD is as a
    BW system type in the source system list of bw system  .
       I found that Tcode RSA1 has ever been run in PRD ECC6.0 , So I did a connection testing of
    ECC6.0 QA with BI7.0 PRD .  
         Step 1. Connect ECC6.0 QA with BI7.0 PRD , ECC6.0 QA was as SAP system type in  source system list of bw system .
         Step 2. Run tcode RSA1 in QA ECC6.0
         Step 3. Delete connection of  ECC6.0 QA with BI7.0 PRD .
         Step 4. Connect ECC6.0 QA with BI7.0 PRD again , ECC6.0 QA was as SAP system type in source system list of bw system .
       I want to know how to change ECC6.0  PRD  source system type to SAP .
    If it can't been change to SAP ,Is there any impact when  ECC6.0 PRD  is as bw system type in source system  .
    Thank you for your help .

    I got the soulution from note:  1087980 - ECC Source systems appearing in BI folder
    Summary
    Symptom
    Source system connection for an ECC system appears in the BI folder, rather than in SAP folder, as expected.
    Other terms
    Wrong folder,RSA1, RSBASIDOC, RSAP_BIW_DISCONNECT
    Reason and Prerequisites
    Transaction RSA1 was inadvertently used on an ECC system , thereby creating a 'Myself' source system entry in RSBASIDOC table
    Solution
    This is just a display issue and does not cause any operational issues. Therefore, it need not be corrected, especially if the ECC system in question is used as a BI system as well.
    If it is absolutely required that the ECC source system appear in the correct folder, perform the following steps.
    1. Check that an entry with SRCTYPE 'M' exists in table RSBASIDOC table of ECC source system.
    2. Note the values for SLOGSYS and RLOGSYS. It should be same.
    3. Run the function module RSAP_BIW_DISCONNECT in the ECC system.
       NOTE: Never run that function module in a BI system!
    4. Enter the following values : 
    I_BIW_LOGSYS   <RLOGSYS> as noted in step 2
    I_OLTP_LOGSYS  <SLOGSYS> as noted in step 2
    I_FORCE_DELETE <X>
    < DO NOT ENTER ANY VALUE IN THE FIELD  - RFC target sys !!!!! >
    5. Go to RSA1-> Source systems in the BI system connected to the ECC system.
    6. Select the ECC source system and select RESTORE in the right click menu.
    Now the ECC system should appear in the SAP folder.
    If running RSAP_BIW_DISCONNECT results in an error like OTHER_ERROR, please check if a valid RFC connection exists in transaction sm59.
    If the myself source system connection cannot be deleted in any case, log a service marketplace message with SAP Support.
    Edited by: fang frank on Jul 15, 2009 8:31 AM

  • How to change the Unitprice value from 2 decimals to 3 decimals in script

    Hi Gurus,
    how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
    Please provide some possible solutions.
    Thanks,
    V.V.

    Hi,
    Check the options available like
    &VAR(.2)&  this will print 2 decimals
    &VAR(.3)&  this will print 3 decimals
    need to change the value for how many decimals you need
    Thanks & Regards
    Sarves Sombhatla

  • How to change customer reconciliation account in ECC6.0 without new GL fun?

    Hi,
    We have to default profit center for one customer without disturbing setup for other customer.
    Hence we have decided to change reconciliation account of that customer and will assign to acount with default profit center in 3KEI.
    Now my question is how to change recon ac of customer having too many line items for that customer.
    Please an I get help on this?
    Please can you provide steps to hange recon ac by transferring balance to other account?
    How we can deal with open/clear line items of that customer.
    Thanks

    Hi
    A rather simple way will be to set up a simple substitution rule for that particular customer in GGB1. You can write a simple substitution rule as under
    Prerequisite:
    BKPF-BUKRS=1000 and BSEG-KUNNR=1001112
    Substitution
    BSEG-PRCTR =101332
    You should activate this rule for entire Document
    Regards
    Sanil Bhandari
    Edited by: Sanil K Bhandari on Jun 13, 2011 12:22 PM

  • How to change or rename the logical system name T90CLNT090 IN BI 7

    HI Expert's,
    i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
    in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
    In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
    because of this i am not able to create the source system between r/3 also.
    so how to change this source system name for T90CLNT090.
    regards
    harikrishna N

    Hi,
    Pls follow this OSS note : 325525.
    Note 325525 - Copying and renaming systems in a BW environment
    Summary
    Symptom WARNING: THIS NOTE HAS BEEN REPLACED.  FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
    You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
    Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
    Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
    Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
    Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
               Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
               Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
               Reactivate all partner agreements that carry the new logical system name after renaming.
    Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
               Solution scenario 2):
    If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                        Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                        Reactivate all partner agreements that carry the new logical system name after renaming.
    Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
    Scenario 3) You want to copy a single BW system of the group by database copy.
    Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                         Solution scenario 3)b): See Note 184754.
    Scenario 4) You want to copy a single source system of the group by database copy.
    Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
               Solution scenario 4)b): See Note 184322.
    Scenario 5) You want to import a client copy in a source system.
               Solution scenario 5): See Note 325470.
    Thanks & Regards,
    Suchitra.V

  • HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

    i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

    As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
    [Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
    Also take a look  at this SDN thread, you might find something interesting.
    [click here for SDN thread|How to change the hostname was set/defined in SAP system?;
    Edited by: santra.anirban on Sep 13, 2010 10:45 AM

  • How to change exchange rate rounding

    Hello guys,
    our customer requires to have exchange rates rounded to 3 decimal places. For direct FX rates it is not problem. But, the customer also requires to have rounded to 3 decimal places calculared cross FX rates (ie. FX rates calculated by SAP through reference currency) and not to 5 decimal places as offers SAP standard. Can anybody help how to change FX rates rounding policy?
    Thanks a lot.

    Hi,
    This cannot be done by a setting.  The currency rate field has 5 decimals and it cannot be changed.
    There are rounding rules you can set with OB90, but even that is not what you are looking for.
    The only option you have is to not let the cross rate be calculated by the system but is explicity entered or uploaded in OB08.  In this way you can ensure that no rate enters with decimals more than 3.
    Cheers.

  • FB03: How to change 0SAP layout?

    Hi all:
    I'm working on a Upgrade project from 4.6C to ECC6.
    I'm having this issue:
    In 4.6C version, the system shows the Text column (field BSEG-SGTXT) in FB03 transaction when I select 0SAP layout for ALV. This layout was modified from SAP original's one.
    In ECC6, doing the same, the system does not show the Text column when I select 0SAP layout. The layout is the original one.
    Of course, I can create a new layout. But I would like to know if it's possible to modify 0SAP layout, and how to do it.
    Thanks in advance
    Jordi

    Dear Sridhar:
    Thanks for your answer.
    Frankly speaking, I don't know how this change was made in 4.6C. This task was done by another person some years ago, and I cannot reach him now.
    Yes, I agree. 0SAP is from the standard.
    Anyway, do you know how to modify it?
    Thanks in advance.
    Jordi

  • How to change dot to comma on numeric pad in Numbers?

    Hi,
    I have bought new iMac with Yosemite system and switched from Excel to Numbers.
    I have Apple's numeric pad keybord. Unfortunately, I dont know how to change the input of the "dot" key on the number pad, so that I get a comma in Numbers sheet, which would allow me to use decimals when working with numbers.
    Cheers
    Mike

    Hi Mike,
    Lucky you with a numeric keypad. I wish I had one .
    Are there any settings in System Preferences > Keyboard?
    Perhaps the Input Sources Tab may help.
    You can also get there from System Preferences > Language & Region > (set your preferences, then click on the Keyboard Preferences button).
    Regards,
    Ian.

  • How to change default alerts in iCal?

    Hello.
    Every time you add a new event in iCal, the Info panel of the event contains a series of default alerts that you may want to add to it. However, all of them are useless to me (e.g.: "Send email to <my address> 4 days after), so I need to manually edit them event by event. Anybody knows how to change them? I have already inspected all the plist files related to ical, and looked inside the ical package content, but I found no indication of where to change these values. Using iCal version 5.0.2
    Thanks,
    l

    John: Thank you, this is exactly what I wanted. I was indeed inspecting the plist with bbedit, but what I did not realize is that the file has some parts which are binary, so I could not see the PersistentMenu-lastUsedAlarms part by using a text editor. I opened it with Xcode and I did find what you were saying, and erased all the junk that was in there. In fact, the issue I had was also described here:
    http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2010-06/msg02349.html
    For some reason, it looks like after some upgrade the program adds were some positive values in the plist and I was stuck with default alarms that were set *after* the events I wanted to set an alarm for.
    I did what you suggested, then added by hand new values to the PersistentMenu part of the plist, and I am now happy.
    For everybody's information, to know what I did, it is enough to know to add Dictionary items to the  PersistentMenu-lastUsedAlarms, with 3 fields:
    -- AlarmTypeKey (this determines if you want a sound, or else an email, or else the other default alarm type keys. For example, sending an email is a Number, value 4; having a message with sound is a Number, value 3)
    -- AlarmDurationKey: This is a Number, in seconds, that determines when you want your alarm to trigger. E.g: -172800 will be two days before. Must be negative for "before", of course)
    -- AlarmParameterKey: This is a String, where you store the value that you want the alarm to have. For example, if you want an email to be sent, the AlarmTypeKey will be 4, as explained above, and this field will contain your email address. Instead, if you want the alarm to be a sound, the AlarmTypeKey will be 3 and this field will have the name of the sound you want (e.g., Basso).
    That's it. Thanks a lot for the solution!
    l.

  • How to change pricing Conditions in Sales order in change sales order bapi

    Hi Experts,
    How to change pricing Conditions in Sales order in change sales order bapi.
    I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
    Thanks in Advance .
    NLN

    HI NLN
      I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
      <b>Import Paramters:</b>
         SALESDOCUMENT - Sales Document Number
         ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
         LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
      <b>Tables:</b>
         CONDITIONS_IN - ITM_NUMBER,
                         COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
                         COND_TYPE,
                         COND_VALUE,
                         CURRENCY.
         CONDITIONS_INX - ITM_NUMBER,
                          COND_COUNT,
                          COND_TYPE,
                          UPDATEFLAG as <b>'U'</b>,
                          CURRENCY.
       Hope i have clarified your query.
    Kind Regards
    Eswar

  • Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

    Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

    This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
    Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
    Does that work?

  • How to change header and footer in login page in oracle apps r12

    Hi all,
    how to change header and footer in login page in oracle apps r12 and login button background color, please help me
    thanks
    saran

    how to change header and footer in login page in oracle apps r12 and login button background color, please help meTips For Personalizing The E-Business Suite R12 Login Page (MainLoginPG) [ID 741459.1]
    How to Personalize Login page in R12? [ID 579917.1]
    R12 Login Page: How to Personalize the Logo ? [ID 849752.1]
    Thanks,
    Hussein

Maybe you are looking for