How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

How do I edit or enter values on multiple sheets at the same time in Numbers? I can do this Excel but don't know procedure in Numbers. Thanks.

How do I edit or enter values on multiple sheets at the same time in Numbers? I can do it in Excel but I don't the procedure in Numbers. Thank you!

The only I way I can think of to modify a single value and have that value change in multipl locations is to have all "the other places" reference a single cell. There is not way without a referene to modify a set of cells simulateously.
This may be something like what you want:
Enter a value in the table "Original Data" cell A1 and the A1 cells of tables Ref1, Ref2 and Ref2-1 will change

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

On I-Mac, how can I close all tabs at the same time?

On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.

Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How many meetings can be opened by one account at the same time?

I've tried Adobe Connect trial version.
There are few questions about the product.
1.How many meetings can be opened by one account at the same time?
   I could open 9meetings at the same time using other PCs. What is the limit?
2.What is the maximum of students in a meeting?
   I'm thinking of buying monthly/Individual product.
3.The meeting never end even though host is out of it. But we want to control.
   Can host close a meeting so that all participants are out of the session?
Thanks for your attention.

This depends on your licensing.
If you are using a Named Host license, then you can open one meeting at a time. If other members of the Meeting Host group are present in a room, then it should allow you to have multiple rooms open, one for each Meeting Host licensing being used.
If you are using the Concurrent Learner license, then each meeting you join uses a different licenses, so as long as you have concurrent seats available, you can open as many rooms as you want/need.
Maximum number of attendees (students) would be your room's concurrent maximum, less your self. The monthly version of Connect offers 25 concurrent attendees in each room, so that would be 24 students and you.
The meeting does end after it is dormant (no host) for ~15 min, however you can use the End Meeting function (Meeting > End Meeting) to close the meeting and remove everyone, including yourself, from the room.

How many users can view the same report at the same time in obiee answers

Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.

Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth

Drill down more than one characteristic at the same time.

Hi,
Is there any way to drill down more than one characteristic at the same time?
When I drill down by 0cust_sales I would like to have drilled down: division/distrchan/salesorg/cust_sales without having to do that one by one.
thank you!

Hi,
This cannot be done unless these characterstics are related to each other in some way as Charactertics & Display Attributes.
The reason being when you drill down the 0cust_sales , there is no link from 0Cust_sales to the other characterstics hence there is no prompt for these characterstics to be drilled down.
However, a smiliar thing might be acheived by adding these chareacterstics into the 0cust_sales in teh query designer by dragging n dropping them over 0cust_sales. you can try this and see if this is close to your requiremetn.
Kind Regards,
Tapish

How do i view itunes store and my library at the same time?

how do i view itunes store and my library at the same time?

apple killed this feature (and i'm really unhappy about this!!). please send a request to apple directly. they obviously don't read this forum. the more people complain about this, the better!
http://www.apple.com/feedback/itunesapp.html

IPVC-3511-MCU - Can't see all persions at the same time on conference

Hello,
I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
Does IPVC-3511-MCU support multiple conference with multiple video screen?
Regards,
John.

Hi -
This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
You did not mention the release of the 3511 software you are running. Knowing that might help too.
Ginger

How do I view multiple images from different projects at the same time?

Hello
I've been trying to find the answer in the user manual, but no luck so far.
I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
Thank you
Elizabeth

Thank you again Tony
I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
Elizabeth

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

Upadting all articles at the same time?

is there a way of upadting all articles at the same time? I have like 64 articles in one folio and I dont see a way of updating them in the folio builder all at once, I have to click on every article and choose update in the Folio Builder, then wait, then click on another, update and wait....

That will definitely be a relief
BTW, when I import several articles, I sometimes lose the links to internal pages inside articles ("go to page 3"). Is that a known issue?
Updating articles is the cure, but it's a pain when I have to do that 25 times...

How to display all layers at the same time?

Hi,
I have created several theme based FOIs with a checkbox to set visible them. Each theme has some data and when you click in the theme region it displays this data in an information box. But when I set visible more than one theme, can only display the information box of the last one theme that I set visible (the others are not clickable because they are under the last no?). Is there anyway to make all of them clickable at the same time?
For each theme that I create I call this function:
 function addThemeBasedFOI(value, i) {
 /* Add JDBC SQL Query theme based FOI */
 baseQuery = "SELECT value,annotation as label FROM " + value;
 var theme = "<themes><theme name='JDBC_THEME'>"
 + "<jdbc_query asis='true' spatial_column='value' jdbc_srid='4326' label_column='label' " +
 "render_style='colorScheme' datasource='DSTest'>"
 + baseQuery + "</jdbc_query></theme></themes>";
 buffertheme = new MVThemeBasedFOI('bufferthemeL_' + i, theme);
 buffertheme.addStyle(sc1);
 buffertheme.enableLabels(true);
 buffertheme.setBringToTopOnMouseOver(true);
 buffertheme.setVisible(false);
 buffertheme.setClickable(true);
 buffertheme.enableInfoWindow(true);
 buffertheme.setAutoRefresh(true);
 buffertheme.attachEventListener(MVEvent.MOUSE_CLICK, showInfoPanel);
 mapview.addThemeBasedFOI(buffertheme);
 function showInfoPanel (loc, foi){
 var width = 250;
 var height = 150;
 var html = "Name: " + foi.name + " Localization: X:" + loc.getPointX() + " Y:" + loc.getPointY() + "";
 mapview.displayInfoWindow(loc, html, width, height, "MVInfoWindowStyle4");
/* Function to set visible a layer */
function setVisible(item) {
 var themebasedfoi = mapview.getThemeBasedFOI(item.value);
 themebasedfoi.setVisible(!themebasedfoi.isVisible());
 if(themebasedfoi.isVisible()) {
 themebasedfoi.centerToTheme();
 themebasedfoi.zoomToTheme();
Thanks in advance,
Esteban.

Hi Esteban,
pls refer to these threads - they may help you with that issue:
Re: MVThemeBasedFOI Index
MapViewer and WMS layers
Dominik

How to change drill filter values of all reports at the same time

Similar Messages

Maybe you are looking for