How to change edits in multiclips

I have been working with multiclips for some weeks now. But I have not found out how to make changes in the cuts (switching between the angles on the timeline).
I have learned (the hard way ;-)that I should not render a multiclip, because then I cannot change the clip the way I want to.
But I think FCP should allow me to correct the exact spots of my cuts in an unrendered timeline. Until now, I only use the 'make undo' command. Can't I change cuts I made yesterday or last week? Do I have to work through the whole multiclip again?

But I have not found out how to make changes in the cuts (switching between the angles on the timeline).
So you've edited your multiclip into a sequence and you want to change the angles that you've selected?
If that is the case, the easiest way to do that is to control-click on the video and/or audio angle in the (un-collapsed) multiclip in your timeline and select a new angle for the Active Angle property. Also, in case it's not clear from your experiences, you can most certainly Add Edit (Control-V) in the timeline and then alter the angle (by control-clicking) for only a portion of your previous cut. And, as stated already, if you select the edit point, you can roll your edits as needed.
Or, if you want to do this while previewing/playing:
Load the Multiclip keyboard layout (Tools > Keyboard Layout > Multi-Camera Editing)
If you'd like to watch the Multiclip view in the Viewer, make sure the Playhead sync is set to Open (Control-Shift-O)
Now, when playing press the = key on your numeric keypad will it will place a marker which tells FCP to switch to the Next Angle for that cut in your multiclip once you stop playback (Pressing the Clear key - also doubling as the Num Lock key - on the numeric keypad places a marker to switch to the Previous Angle)
If you've got an Angle in mind, you can simply press 1-0 on the numeric keypad to place a marker to switch to that angle (the 0 key is for angle 10, by the way)
Finally, if you simply want to do this while paused, the keyboard shortcuts (from steps 3 & 4) work to instantly change the angle for your cut.
Or is all this not working for you?
Dual 1.42 G4, 2GB RAM, 9800 Pro, 20" Cinema; Mac OS X (10.4.6) Final Cut Studio 5.1

Similar Messages

How to change "Edit In" behavior

I have Photoshop CC installed in the Applications folder of my startup drive, as normal. I also have a backup drive online which backs up the startup drive each evening. LR 5.5 insists on using PS from the backup drive for editing, instead of the copy in the Applications folder. If I turn off the backup drive, it still refuses to start the other copy. How can I change this? Thanks...

That is a pain..
I am sure that I had to delete the Lightroom Preference File and maybe even the PS one to solve this.
You can find the Preference files through this link: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Do it with the back up drive disconnected.

Config. Portlet Template/Object Categories - How to change "Edit inline?"?

Hello!
I got a problem with a portlet template or published content webservice. user should inline edit portlets like they can do with announcement portles. but i can't change the value of this option. look screenshot for more details: [http://img170.imageshack.us/img170/1317/screenshotg.jpg|http://img170.imageshack.us/img170/1317/screenshotg.jpg]
The value i want to change to "true" is on the right below "Edit inline?". Any ideas?
Thank you
Volker

Hi
Thank you for reading my post
by your help i looked at chapter 8,9 of ADFBC tutorial at http://www.oracle.com/technology/obe/ADFBC_tutorial_1013/index.htm
and also chapter 10 of ADF Developers Guide , but still i did not figure it out .
what i found is that we can create View Objects that are filtered (we can use custom sql statement to initiate the view object data) but this feature is just supported for Oracle database and can not be used with Mysql.
do i look at the correct place for learning what you point out ?
does feature that you said just works with Oracle database ?
Thanks

How to change edit button

Hi Friends,
I am adding a new page to my sample test apps AnyCo Corp. the new page has edit button (a pencil and paper icon).
But when I run the page, I saw that its not the same edit icon as the other pages. i tried to edit the pages
again and click on BUTTONS region, but i cannot see any edit icons there.
Where do I search this edit icon please.
Thanks a lot

Hi,
Go to the button definition and use the following settings:
Button Style: Image
Button Image: #IMAGE_PREFIX#xxxxx.xxx
Where xxxxx.xxx is the image name. These images are stored in the /i/ folder on the server. For a list of the ones that were available to me on my OTN workspace, see: [http://htmldb.oracle.com/pls/otn/f?p=45958:21].
Andy

How to change edit modes ....stuck or bug or..?

ive started projects in premiere cs6 mixing formats with dslr and gopro hero3 clips... ive seem to be stuck in arri mode?.. even when i drag clips tp the creat sqeuince function?...maybe i need some tutorials or info ?...
any thing please post!!
mike d
facebook micheal d. duckworth
youtube user sk8ermiked
thanks!

You can't change sequence settings. But you can create a new sequence and cut/paste the clips into it.

FCP 7 Multiclip Edit Sequence: How to change audio?

Guys, I've edited a Multiclip Sequence, which is approx 1 hour in length.
I currently have audio from only 1 Clip but now want to change all the Audio to come from another Clip.
What is the easiest solution to do this?
I have 3 Clips in the Multiclip Sequence. Currently I'm using the Audio from Clip 1. But now want to use the Audio from Clip 2 for the entire edit.
I've tried everything but the only thing that works is if I double click each edited Clip and amend the audio from the Playhead Sync drop down box.

Thanks for your reply Michael. I'm not cutting it together. It's already been cut. All I need to do is change the Audio from Clip 1 to Clip 2 for the entire Cut Sequence.
I can do this by Double Clicking each Clip and then choosing Clip 2. But I want to know if it's possible to bulk change the Audio.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.h

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?

Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly

How can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

how can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

you have watched and understood the tutorials?
http://help.apple.com/imovie/

How to change the textarea to html editer in knowledge maintenance page ?

Hi, experts,
When we maintain the knowledge, we typed infomation into the textarea.
Now we want to use html tags to show the knowledge info, so that the text can be shown in html table.
how to change the textarea to html editer ?
Thanks.
Oliver.

closed.

HT1386 I have just rceived an upgrade to an iPhone 3GS. Now, when I visit the Store all the prices are in US dollars, not a big problem but I cannot edit my card details or contact to a UK address. I cannot see how to change this.

I have just rceived an upgrade to an iPhone 3GS. Now, when I visit the Store all the prices are in US dollars, not a big problem but I cannot edit my card details or contact to a UK address. I cannot see how to change this.

Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik

HT1918 How do I edit/change the two security questions? I do not recall answering these before and if I did, I do not recall my answers.

How do I edit/change the security questions? I do not recall answering them before and I now cannot purchase apps on my new iPad. Thank you.

Hi
To reset your security questions you will need to contact apple either by phone or email, many people have asked this question before and most have all ended up contacting apple
Hope this helps

Re-installed photoshop elements 12. In folder correct copies, how to change read-only to edit photos? After printing photo how to return to grid view?

Reinstalled photoshop elements 12. How to change photo after printing back to grid view? In folder correct copies one or more files is read only. How to change so these can be edited?

Reinstalled photoshop elements 12. How to change photo after printing back to grid view? In folder correct copies one or more files is read only. How to change so these can be edited?

How to change edits in multiclips

Similar Messages

Maybe you are looking for