How to Change Encore Automatic Transcode Settings?

I normally use Encore CS6 Automatic Settings because I have no idea how big the file will be and Encore automatically does the math for me. I want to change the Automatic DVD setting to Progressive but it is says "Lower Field First" and it is grayed out. How do I change it?

Does PR report the size of both files combined when exporting demuxed? (I don't know.)
Remember that a DVD called "4.7 Gigabytes" is really only 4.38GB. I don't know which version PR reports (GB or GiB). Encore, naturally, reports using one version in one panel and the other in another panel.
For example, in the Encore project panel, it will report a file size as X.XGB. But when it lists the amount of the disk used and free in the build panel, it is reporting bytes with "GB" after it.
Encore uses padding (It says the file will be bigger than it calculates) for bluray, but not DVD. Main point: it is difficult to calculate using Encore's (and probably PR's) stated estimates.
Remember than until Encore (any authoring program) combines the demuxed video and audio streams (potentially multiple audio streams) during the build, it really does not know how big the files will be.
I played the DVD it burned and it also looked all deinterlaced and jaggedy.
I'm still not clear re the field issues in your material.
Are you sure than Encore did not transcode the material again? What did encore say on import in the DVD transcode status column? Do not transcode?

Similar Messages

  • How to Change the Screen Saver Settings to Mystify in Windows 7 using vbscript?

    HI All,
    How to Change the  Screen Saver Settings to Mystify in Windows 7 using vbscript?
    Thanks
    Divakar

    First: What is a GPO?
    Second: jrv, that was not too helpful in general. someone should do some actual code.
    Bob Blork - Mark as answer if it helped!
    This is a forum for technicians and not for home users.  GPO is what technical people use to manage Windows. THe script to do this is in the link I posted - how is that not helpful?
    I know this is all over your head.  I am curious as to why you would respond in a technical forum to a question you do not understand.
    We do not provide free scripts.  We also will point users at correct answers.
    This is not a forum for homw users or for simple support questions.  It is also a thread that has been  answered for a long time.  Perhaps you should start a new thread if you have an actual question about scripting.
    ¯\_(ツ)_/¯

  • How to change the contact sync settings for icloud? please advise

    how to change the contact sync settings for icloud? please advise?

    There are no settings to change. Assuming you are using Lion 10.7.2 (or 10.7.3) - which you should be - you simply sign in in System Preferences>iCloud and check 'Contacts' and any other data you want to sync.
    If you are using an earlier system you will not be able to sync your contacts, and there is no workaround. However you can sync them with Google or Yahoo contacts, though I don't know how well this works.

  • Where Do I Find Encore's Automatic Transcode Settings?

    I am putting the finishing touches on a 1.75hr, NTSC 4:3, 5.1 (AC3), 2 lead-in AVIs, one Main Menu + 3 Scene Selection Menus (non-animated) and one Play All Playlist Project and have done several +RW burns to check things out. Everything fits nicely on 4.3GB +RW.
    Now my questions: everything has been set to DVD-5, and Encore to Automatic. I have looked for the Transcode settings, but cannot find them. I have read through the manual, F1 and Jeff Bellunes Encore Focal Guide, but cannot find what I am looking for now. The Audio and Video quality are good, but I do not mind going to a DVD-9 (DL), if I can increase either. Where do I look to find what Encore chose? If I want to do DL at max. quality and bitrate of 7, do I need to set the Transcode settings of each Video Asset? This project will only play on set-top DVD players, and most are fairly recent models, that all handle DL.
    As is, it works OK, but I am wondering how to tell if I can go higher quality at some point, if DL is a viable option. I dont want to just waste a DL, if what I already have is as good as it gets.
    I know that the answer has stared me in the eye on many occasions, but I just cannot find, what I think I am looking for.
    TIA,
    Hunt

    Bill.
    Try running a sort of "manual Bit-Budget" to see what the numbers say.
    DVD5 = 37,600 Megabits.
    DVD9 = 68,000 Megabits.
    Ideally, we subtract an overhead of 4% to allow for variables.
    This gives us the following values:
    DVD5 = 36,000
    DVD9 = 65,000.
    Let us first subtract the Audio.
    1.75 hours at 0.448Mb/sec = 2,882.4 Megabits
    (0.448 (The data rate of DD 5.1) * 60 (seconds) *105 (minutes) )
    This leaves us with (36000 - 3000) = 33,000 Megabits.
    I do not know the running tome of the lead-in AVI clips, but let us assume 5 minutes in total.
    This gives us 33,000 megabits to fit 110 Minutes of Video.
    So.
    110 minutes = 6,600 seconds.
    33,000 / 6600 = 5 Megabits/second available for film.
    This is under 6, so will be a VBR encode with an average bitrate of 5Mb/sec.
    For DVD9.
    Same Audio.
    Same sums except the total megabits for video is larger, so we have
    65,000 - 3000 = 62,000.
    62,000 / 6600 = 9.3939 Mbits/second for the video is available.
    Now, the highest possible allowed rate for DVD-Video - 10.08 for all combined.
    For Audio & Video combined it is taken as 9.8 Mbits/second.
    On a pressed, or replicated disc this is fine.
    On written media we need to be more careful, so we set a peak video bitrate of 7Mb/sec - which although will not fill a DVD9, will present the highest possible compromise between playability on maximum number of players & highest quality.
    You may experiment & go as high as 8Mb/sec, but I would generaly not recommend this to written media, DL especially.
    There is a chance players will choke due to the higher error rate from the reduced reflectivity available with written media & DL media in particular.
    It does give you almost a 50% increase in bitrate on your video.
    Minimal is 40% gain in bits.
    This will certainly make your film look better.
    I think it is worthwhile going to DVD9.

  • How to change E71 internet browser settings?

    I bought a new E71 whilst visiting the UK and now using it in my home country in South America.  Wireless internet hotspots in my country require you to change your internet connections LAN settings within the internet explorer browser to "Automatically detect settings".
    I just need to know how to do that on the E71 because I am picking up Wireless Hotspots but cannot use them until the LAN settings are changed on the phone's browser!
    Is there any way I can do that? - HELP!

    Nokia's Wifi is set to automatically detect settings....
    However if you can't access the internet through it you might have to manual change the server ip address etc... but you need to know those details.
    On your E71 go to MENU - TOOLS - SETTINGS - CONNECTION - ACCESS POINTS - Select the access point you want to edit - OPTIONS - EDIT - OPTIONS - ADVANCED SETTINGS.
    But once again would require you to know the DNS etc settings. 
    You might be better off knocking off the Wifi connections in your ACCESS POINTS (link above) and then setup the connection points again from the main screen. 
    How do you connect to wifi in SA? Do you connect to the wifi and then a page opens up where you type your username & password? Or do you have a connection with a WPA type of key that you've already configured on your laptop?

  • Automatic transcode settings can't close DVD image in standard 4,7gb size

    So I have this feature film of a marriage 1h30m long that Encore refuses to generate an ISO of standard DVD size. The point is, for some reason this project in particular is generating a 6gb image, in the settings that even 2h10m fits standard DVD size. What am I doing wrong? What to do now?
    Encore 5.1

    On an automatic transcode, Encore uses what you have already transcoded in the project plus menus, motion menus, etc, and uses settings to fit the rest on the disk. If you transcode some assets early, then others later, Encore will transcode the first ones at higher bitrates and not be able to go low enough to get the others to fit.
    I have not tested whether this will actually result in too big for the disk, but I suspect it might.
    You could look at the transcoded files in the Encore folders and check them with mediainfo or gspot for bitrate to see if they vary.

  • How to change the automatically generated email address?

    Hello,
    The description of the problem is as follows:
    When our system sends to the customer the report with account statements (as an attachment) the automatically generated text that he receives in the email is:
    "Please respond to "K047472" "
    but the text should be:
    "Please respond to "(..here must be a certain email address we want the customer to respond)"
    Do you have any idea how to change this?
    regards,
    Slawek

    Hi Slawomir
    Please go to SE91 and change the message text.
    thanks
    Ashok
    assign points for useful answer

  • How to change the preference color settings ?

    Hi.
    I use a script for converting images but I can not change the color preferences in Photoshop to set a default if the RGB images of departure does not. How to change the color settings ?
    Pls help.
    Thx.

    This tech note:
    http://docs.info.apple.com/article.html?artnum=305634
    says that to change your outgoing server settings you
    go to Settings/Mail, and then "in the Outgoing Mail
    Server (SMTP) Host Name" you make your changes. There
    is no such field, not even under Advanced. How do you
    change the outgoing server and its settings, without
    having to set up a whole new email account?
    There is on MY iPhone!
    BUT it is only available for POP accounts!
    ajm

  • How to change the Schedule For settings for an object

    Hi All,
    do you know how to change with BO Enterprise SDK Java the schedule settings for an object?
    I mean these settings that can be changed manually In the Objects management area of the CMC, selecting a report object, Schedule tab, Schedule For link:
    - Schedule only for myself
    - Schedule for specified users and user groups
    Rest of settings can be managed with ISchedulingInfo, but I don´t know how to change the "Schedule for" property.
    Should I use other SDK?
    We have Webi Documents, BOXIE R2 SP2
    thanks,
    regards,

    Hi,
    I think I´ve solved it,
    we can use
    ISchedulingInfo.getMultiPassObjects()
    that returns a java.util.Set of user/usergroup IDs on the schedule for multipass.
    and then we can work with this Set (adding or removing users and groups).
    Setting manually to "Schedule only for myself" in the CMC is the same that removing all the elements from the getMultiPassObjects() set.
    thanks,

  • How to change "My Number" in Settings Phone ?

    I've change my carrier recently and the number in "Settings" > "Phone" > "My Number" is displayed "Unknown". Does anyone know how to change it? 'Cause I even can't click it to change it manually. Thank's!!

    Did you already sync your phone in iTunes? Do you get the same result in the summary pane?

  • How to change the HFM timeout settings in version 9.3.3

    Dear experts:
    We wonder how to change HFM user timeout setting in HFM 9.3.3 running Apache web server. I have found the discussion for HDM 1.1.2 in this forum, but we have this old HFM version. Please advise.
    Thank you in advance.

    Hi,
    Review the below mentioned knowledge article.
    Hyperion Financial Management Error "Session has timed out" (Doc ID 1372208.1)
    Hope this helps,
    Thank you,
    Charles Babu J

  • I don't know where and how to change my browser's settings to allow POP-UPS??? Help!!!

    Help!!! I need to change my browser's settings to allow POP-UPS from the AT&T website so a new window can appear so I can do the tests. Help!!! This is time sensitive!!! :)

    Hi,
    If you go to the AT&T site and then tap the icon to the left of the URL/location bar, you can select 'Clear Site Preferences' to allow popups.
    Thanks,
    Michelle

  • "automatic" transcode settings is not filling my DVD capacity

    I've put together four AVI files in Encore and every time I go through the "build" process 20 GB worth of material is reduced down to 720 MB (approx).  I always thought that a great advantage in using Encore was that it filled your material to fit the medium.  I'm using a DVD not CD giving me more than 4GB.  How do I get "build" to maximize my project into a single DVD, or DVD image?
    Thanks...

    "What version of Encore?"   Encore cs4
    "Do you have any material in the DVD-ROM content?  (Look on the build tab.)"  Yes, it indicates 526 KB used for DVD-ROM content.
    " Is it "Untranscoded" and "Automatic"?"      Untranscoded.
    "In the Project Settings, Advanced tab, what do you have set for the maximum Audio/Video Datarate?"   8.0 Mbps
    As no changes were made from my original setup, my results are the same: Format: DVD; Output: DVD Image; Disc Info: 723.2 MB used, 3.96 GB free.  My four AVI files total about 20 GB.  Again, my original question, why doesn't Encore use up another 3 GB to maximize the data available which must produce a better running DVD video than information on a mere 723 MB?
    I do thank you for your assistance.  I'm sure that there must be something else I'm missing.
    Howard

  • When reflow text; How to change paragraph automatically when changing frame

    Hi
    Im new to indesign scripts, but thought that this maybe was the right forum to ask the following question. (Im using Adobe Indesign CS.5 )
    Im currently trying to import a file (word file / excel both is possible) into an indesign book and formatting the text automatically!
    My question is: How is it possible to reflow text into frames and when changing frame it changes paragraph?
    I have already figured out how to reflow the text, and actually also managed to relow text into the frames and change paragraph style. I know how to use the keep option, and by this change the paragraph style when e.g. changing frame break/page break etc.  (but if the content being flowed-in is not tagged with style names then I cannot figure out how to do it)
    The document and its content I whish to import do not have any tagged paragraphs!
    If any of you have a hint, I would be more than happy to hear from you

    My question is: How is it possible to reflow text into frames and when changing frame it changes paragraph?
    This question is not gramatically correct and I cannot understand what you are trying to ask.

  • HOW TO CHANGE WORD PROGRAM LANGUAGE SETTINGS?

    Hello, I originally bought my computer in CA in the U.S with the hard drive 10.4.7. I came here to live with my mom for a while in mexico due to personal resons and while I was here I decided to buy the newer hard drive for my mac which is the 10.7.4  But when they installed it all the default programs they installed such as "word"Is all in spanish And I want to know how I can change the lanuage to english? Also when I press Command Option P & R it'sall in spanish and I dont quite understand it. So if you can pleae guide me how I can change the language settings to all this? Could I do this ALL at once? PLEASE HELP ME sorta desperate? Haha, Thanks.

    All Apple stuff is multilingual.  You just go to system preferences/language & text/language and move English to the top of the list and then restart or login logout.
    Stuff made by MS is often only in one language only, so if you want a different one you have to get another copy. For problems with their apps, ask in their forums:
    http://answers.microsoft.com/en-us/mac/forum/macword
    Make sure you tell people what version of MS apps you are using, as there are lots of them and it makes a difference.

Maybe you are looking for