How to Change Encrpytion Backup Password?

I currently know my encryption backup password. But it was set one I dont commonly use so fear I'll forget it eventually. How can I change the password? I have same issue on iPad 2 and iPhone 4. Thanks.

On the device's Summary tab when connected to your computer's iTunes, under the Backup heading there should an Encrypt iPad Backup tickbox and next to it a Change Password button

Similar Messages

Does anybody know how to change a backup password when original is unknown?

I recently upgraded from a 3Gs to a 4, and i backed up my 3Gs but its password encrypted and i never set up a password, how do i go about changing the encryption password when i dont know the original password?

If the part you can see is enlarged, double-tap with THREE fingers. Then go to Accessibility Settings and turn off Zoom.

How to change the default password file's name and path when the database created?

how to change the default password file's name and path when the database created?
null

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

How to rest the backup password in my computer?

How to rest the backup password in my computer?
I create backup for my iphone and I but password, now when I want to restore my backup it asking for password which I forget,
is there any way to rest this password.?

You cannot use that backup without the password

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

How to change remember bank password?

How to change remember bank password to no!

The Keychain Access utility lets you remove many web remembered passwords and its in your Applications -> Utilities folder.
If you don't see your bank there, your browser's Cookie manager in its preferences can have the cookies for your bank removed, which usually resets the memory of having your password stored.

How to change Apple ID Password IF...

How to change Apple ID Password IF I forgot:
- The answers to Security Questions (it may sounds silly but I don't even remember making Security Questions).
and
- Don't have access anymore to the Rescue Address (I used my very old email which is no longer active).
So is there any way I could change my Password?
And now I want to change my Security Questions and my Rescue Address as well.
Hope someone could come with the right solution.
Thank you very much.
- Bianca -

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

How to change your desktop password on a mac when you forget your old password

how to change your desktop password on a mac when you forget your old password

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password,
     and OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself

How do i get backup password if i forgot

how can i reset my backup password

It's not stored anywhere, the only way to get it or change it is to remember it.
From iTunes: About iOS backups :
When your backup is encrypted, you'll need to enter the password when enabling or disabling encryption or when restoring from the backup.
Warning: Make sure it's a password that you'll remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and choose set up as a new device when iTunes prompts you to select the backup from which to restore.

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

How can I disable backup password from I tune?

how can Idisable backup password from Itune ?

How does this relate to iPhoto on a Mac? Do you not want to be in the iPhone 4 forum?
OT

How to change the Portal Password using a link from Web dynpro application

Hello Everybody,
I have a requirement to change the user password from a web dynpro application which is available on a mobile device. Firstly User will log into the portal through a mobile device and after getting authenticated user will be redirected to the mobile application. Within this mobile application there will be a link to change the login password(Portal login). Can somebody tell me how can i change the portal login password from a link available within the mobile application. Looking forward for a suitable reply.
Thanks to all,
Regards,
Saby.

Hi Maksim,
Thanks for your reply..but i would also like to know can we directly use the Change Password Iview "persoUserPassword" from the portal. Can i directly Pass the URL of this iview from the portal to a "Change Password" link in the web dynpro application, so that when the user click this link he should be able to see this Iview on his/her mobile device and should be able to change the password from there. But i dont know whether this iview will appear properly on the mobile device or we have to have a custom web dynpro application for this purpose...Please reply with a suitable answer.
Thanks in advance.
Regards,
Sarabjeet Singh.

HT1937 how to get a backup password which i have never made

i tried all my password but non of them worked how do i get a password for the back up on itunes

There isn't a way to recover the password.
You can try leaving the password field blank.
You can also try using an Exchange account password, some Exchange configuration profiles will require the iPhone to create encrypted backups.
If you can't remember the password, iTunes won't restore the iPhone from that backup. If you don't remember creating a password and think it was a bug or something, try contacting Apple.

How to change username and password

How can you change username and password for icloud under settings on iPhone?

Scroll to bottom and tap the big red Delete Account button, then sign back in with the correct username and password.

How to Change Encrpytion Backup Password?

Similar Messages

Maybe you are looking for