How to change ExchangeRate Type Property in EPMA
Hi all,
I would like to change the ExchangeRate Type Property (from NONE to AVERAGE) in EPMA Accounts Dimension (local dimension) for a lev0 member, but the Property is read-only (and it is flagged as "DERIVED"). How can I change the Property or another question where the fuck is the Source for the inherited value????
Thanks in advance
André
P.S.: If I create a new lev0 Member the property is read-only, too.
Edited by: Andre on 11.03.2013 14:55
Ok, I could find it - if you change DataType to currency (was unspecified) than you can change the ExchangeRate Type.
Nevetheless many thanks to all :-)
Similar Messages
-
How to change data type of attribute in caf
hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
Where is "save as" or how to change file type in Preview in Lion?
Where is "save as" or how to change file type in Preview in Lion? I used to use Preview to change quickly change a lot of PNGs to either JPEGs or PDFs but with the introduction of versions auto save etc there no "save as" in the File menu. Any suggestions how to get this functionality back or how to get around it within OS X (no Photoshop etc)?
Just wasted 15 minutes looking for that. What's wrong with Save As?
-
How to change light type?
Does anyone know how to change light type?
What happens is that I have a button that I would want to create a Point light, but it just create a spot light.
Does anyone know how to change it to create a point light?
My code is:
//Add a Point Light to active Comp
addLightCtrl.onClick = function(){
var pointLight = proj.layers.addLight("Light", [960, 540]);See the LightLayer object's lightType attribute. Page 100 of the AE CS6 scripting guide.
pointLight = activeItem.layers.addLight("Light", [960, 540]);
pointLight.lightType = LightType.POINT; -
How to change latency type to fast?
How to change latency type to fast?
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
5 days, 03:08:00
Downstream:
16,403 Kbps
Upstream:
948 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.1 dB / 4.7 dB
Line attenuation (Down/Up):
30.5 dB / 16.2 dB
Output power (Down/Up):
20.9 dBm / 12.2 dBm
FEC Events (Down/Up):
313987846 / 3701
CRC Events (Down/Up):
2155 / 18271
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
49173 / 14016
Error Seconds (Local/Remote):
0 / 17361 -
How to change nat type 3 to nat type 2 for Plastation 4?
how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000
Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
1. Get the MAC address of your PS3. To find your MAC address simply go to
Settings > System Settings > System Information
2. Assign a static IP address on your PS3.
3. Access your router's user interface to open a few ports.
4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
TCP: 80, 443, 5223
UDP: 3478, 3479, 3658
5. Once this is done, powercycle your PS3 and the router.
6. Run a connection test and check if it is now on NAT2.
Good luck. -
HOW TO CHANGE ACCOUNT TYPE FROM IMAP TO POP
HOW TO CHANGE ACCOUNT TYPE IN YOUR EMAIL FROM IMAP TO POP
You can't. You need to create a new account in Mail.
Note, when setting up a new account (after clicking the '+' in the Accounts proeference), enter an invalid email address or option click the Continue button to be given the choice of account type (POP or IMAP). -
Change message type property of message in Orchestration
Can we change the message type property of message in Orchestration ?
I tried to change the message type property of message in Orchestration(in expression shape) as follows:
MessageName(BTS.MessageType)="20";
But admin console showed the error that it is read only property.
How we can change it ?
PrakashNo you can't change the message type context property. If you have some process which is depend on message type value, then construct a new message whose targetnamespace and rootelement matches to the value which you want to set. With something like..
create a completely new schema with the fields/ data structure same as the one where you want to change the message type
Set the newly created schema's target namespace and rootelement to the one which you want to change. For example if you want to change the message type values as
http://samenamespace#sampleRootElement, then set the target namespace of the newly created schema as "http://samenamespace" and its root element
as "sampleRootElement"
Then construct this new message from old message using message assignment shape or transformation using map. This way the newly contricted message will have the message type value as want you want to change. This is the only way.
Moreover you can't set the message type value as "20" as you have shown, its targetNamespace#rootelement of the schema, not any custom value. If you have any process which depends on this custom value assign this value to a custom context property
using property schema.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
How to change material type and industrial sector of the exsisting material
Hi,
There is an issue where user wants to change material type and industrial sector of the exsisting material .Is it posible to do so??
IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector can be created.
Points will be definitely rewarded.
Thanks
RohitHi Rohit,
You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
Remember the new material type should have same attributes same as old material type.
OLD Material New Material
1) Standard Price 1) Standard Price
2) Manufacture part 2) Manufacture part
profile actvated profile actvated
3) Quantity & Value 3) Quantity & Value
Updation in all areas Updation in all areas
4) should have same GL 4) Should have same GL acs
acs
It is not possible to change Industry sector once created.
If you want to delete the Material, you can flag it in MM06 trxn code.
Reg,
Ashok
Dont forget to Assign points if useful. -
How to change set type attribute of a product
Hi ;
I created additional fields for products by using "COMM_ATTRSET". It created a table and functions but I dont know how to change this additional attributes.I cant use these attribute set functions because i dont know fragment_id yet. I think there must be a function encapsulates them.
Is there any BAPI to change set type attributes?
PS: In forums , I found an FM "COM_PRODUCT_MAINTAIN_MULT_API" but I think it hasnt been used anymore in CRM7.0
ThanksThanks for your reply ;
but FM 'COM_PRODUCT_UI_MAINTAIN' doesnt have any generic import parameters to send my data to it in form of newly created attribute set type table "ZPRODUCT".
I want to set some fields of ZPRODUCT and i need to send them in this structure, this table has column FRG_ID , if you set an additional parameter for the first time , it generates new GUID..I think 'COM_PRODUCT_UI_MAINTAIN' generates this GUID but i dont know how to use it.
Can you give an example about using this FM? -
Error value = 73, How to change the type of password?
I want to use the famous wiki integrated in leopard, so I had to configure open directory and DNS.
Well my problem come from that I can't configure open Directory, just after creating a new admin, I have no possiblity to change the type of password, there is just the type shadow, and I know that we had to choose open directory's type.
Obviously, I'm authenticated in the workgroup manager
Which services I had to turn on to use open directory's type?
Or which mac I have to hit.
THXHi
So I had to configure open directory and DNS
What did you do or not do exactly?
My problem come from that I can't configure open Directory
You won't be able to configure Open Directory to allow different password types unless you either bind your Server to an existing KDC or make your Server the KDC. For the Server to be a KDC (Kerberos Distribution Center) it has to be an Open Directory Master. Successful promotion to an Open Directory Master Role absolutely depends on a correctly configured and running DNS Service - either on the server itself or on another server on the same network.
There are plenty of posts in these forums outlining how to configure your Server in terms of DNS as well as how to promote to Open Directory Master. Apple themselves make available Admin Manuals that should assist:
http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.5.pdf
Failing this these forums (as already mentioned) as well as:
http://www.afp548.com
Hope this helps, Tony -
How to change data type of input parameter
Hi
In my procedure i declared the data type of "Value Date" Input parameter as Date where as in CR it is showing data type as "Date Time". Can any one please specify how to change to Date.
While prompting for input parameter in description it is showing message as
Please enter Date time in format"yyy-mm-dd hh:mm:ss" . To change the content selected "format field" option. But is there any way to change input parameter data type.
Please suggest how to change.
Thanks SruthiHi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
How to change your type of ipod in itunes
How can you change your type of ipod in itunes. We purchased a new Ipod touch and the computer/itunes will not reconize it.
Try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Make sure you have iTunes version 10.5 -
How to change content-type in receiver mail adapter
Hi,
I have receiver mail adapter for sending XML file as attachment in the mail. My partner expects to receive mail with content-type: text/xml, but XI sends Content-Type: application/xml. Please advise how I can change content-type to text/xml.
Thank you
Levhi,
try MessageTransformBean
Transform.ContentType
http://help.sap.com/saphelp_nw04/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm
also shown in my blog:
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
How to change file type associations in SAP ERP 6.0?
Hello,
I'd like to figure out how to change the application associated with a given file type in SAP. I want to open a .DOC file, but I am using OpenOffice instead of MS Word. I have .DOC file type already associated with OpenOffice in Windows XP, but SAP doesn't seem to recognize that association. I am using SAP ERP 6.0. Any ideas?
MikeHi,
MS Word is mandatory. You will not be able to work using Open Office in SAP.
Regards,
Rajesh Kumar
Maybe you are looking for
-
I currently have a Netware 6.5 sp8 dns server and an OES11 DNS server. As I am migrating way from Netware (tough to do because it simply works!) I have moved all of my dhcp and dns over to the OES11 box with the Netware box as a backup. I need to shu
-
ST03N shows users accessing transactions even when not logged in
Hello all... We are trying to determine how many times a user executed a transaction during a specific period, and are using ST03N to do this. We get the information fine, but it shows non-system users as having accessed transactions on days they ar
-
Macbook air stream on tv via apple tv
Hello, I have an apple macbook air and apple tv. Does anybody know how to stream the view of the macbook to my tv via apple tv. With ipad and iphone this is possible. Thanks a lot in advance
-
I am using batch determination and while doing the billing for the item , i am getting an error log item is not billing relevance, As my batch determination item cateogry is YTAN, in that i have billing relevance indicator as BLANK, plz guide me for
-
Custom confocal question with PCI 1409 based acquisition
We are using a PCI-1409 to acquire a high def and video rate image from a custom confocal system. We use the BNC breakout box to send in luminance, hsync and vsync from the PhotoMultiplierTube and our custom control box. Because of the way we scan u