How to change F2 to F1 extraction method on datasource?

Hi, i copy the FM RSAX_BIW_GET_DATA and put it in datasource, but the extraction method assigned is always F2!!!
Why?
How to change F2 to F1 extraction type on datasource?
Thanks in advance!
Bye!
Ferdinando

Dear Lokesh and all other of the community,
I have now my solution for delta extraction of a generic data source. FM RSAX_BIW_GET_DATA_SIMPLE and as well RSAX_BIW_GET_DATA is not working for me, as they are not including delta function. My solution is based on FM RSVD_BW_GET_DELTA_DATA. Here are the steps:
1) Copy RSVD_BW_GET_DELTA_DATA and change to your purpose the ranges, the extract strukture, the z-extract-table (including field TSTMP) and the z-extract-view (not including field TSTMP).
2) Create a new generic datasource with RSO2. Choose extraction via FM and enter FM ZRSVD_BW_GET_DELTA_DATA and z-extract-table.
3) Change in table ROOSOURCE the EXMETHOD from F2 to F1, DELTA the from AIM to CUBE and the EXTRACTOR to the z-extract-view.
NOTE: You will now get the error message "Table is not existing" RJ403 in Transaction RSO2. - this has no effect. Use transaction RSA2 to check your settings.
This solution is working to:
first: do the initial load of all data -> after this the delta queue is created in RSA7
second: do the delta load of all new data -> based on the timestamp, means all data with timestamp after the last load, also changed and new data -> you see the last timestamp of delta transfer in tabel ROBWQTSTAT
Best greetings and thanks to Stephan Christian Müller and Lokesh Pattnayak,
Peggy

Similar Messages

How to change the Safety Intervals for standard Content datasources

Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.
<b>
How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
Thanks
Soniya Kapoor

Hi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB

How to change the source system for just a datasource

Hi,
Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
Any idea about how to proceed ?
Regards,
Joan

Hi,
If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
Any idea about how to proceed ?
Regards,
Joan

How to change the Package of planning area and datasource to be transportab

Hi every body,
I av created a datasource for the xxx planning area and saved in $tmp which is local package and cannot be transportable .and i would like to transport the planning area along with the data source.But before transporting the planning area along with the data sourse i av to change the package of the data source.I am not able to understand where should i change the package of the planning area and datasouce.
Can any body help me out of this problem.
Can be rewarded.
Shashi

Hi alaxander,
Thanx for your reply but before tranporting a datasource i av to transport the planning area bcoz it is the source.so how can i change the package of the planning area which is in $tmp (local object).
Regards,
Shashik

How do I change an Apple ID payment method to 'None'? I've tried everything and the only solution is to get a new e-mail and start all over again. Any other options?

How do I change an Apple ID payment method to 'None'? I've tried everything and I found the only solution is to apply all over again with another e-mail address. Any other options?

Buy an iTunes Music Card and redeem it to your account - the "none" option should be available then.

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

How to find the extraction method of a datasource?

Hi,
On a review of some documents on SDN, regarding how to track where data is coming from to BW, there was this helpful quote.
Just knowing what is the extraction method of a datasource and our search of the origins achieves a vast improvement!
So, through se11, ROOSOURCE gave some details including the include ROEXTRACT.
from here, I am getting stuck, se16 and se11 are not helping.
How do I move from the information on this screen to see, for example, the extraction method for a datasource 2LIS_11_VAITM
Thanks

Hi,
I followed the instruction i.e. in ROOSURCE then Contents...
but when I enter the datasource 2LIS_11_VAITM in hoipes to see the corresponding Delta Process for this datasource, I get a message
"... No table entries found for specified key"
what does this mean, knowing that thie datasource exists.
Thanks

Cant work out how to change payment method to none

cant work out how to change payment method on apple id to none as i dont have a credit card

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How to change Auto-reaction method automatically?

Hi all,
I want change the Auto-reaction method for few systems in the landscape,How to change the method automatically for all the system with out doing Manually in eash of the system.
Regards,
Neni

Hello
The below URL might be useful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201c3148-faef-2d10-ac80-e0a8bc7503a1?quicklink=index&overridelayout=true
Thanks & regards
bala

How can I use srvctl command line for change "Failover type" and "F method"

Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.

user10674190 wrote:
Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
Also see
11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

How can we change the behaviour of a method by using proxy ??

Hi ,
can anybody tell me how we can add or change the behaviour of a method in java using the proxy object ?? it would be better if u put ur idea with an example .
Thanks ,
Ganesh

Please take your time to write full words: "you" instead of "u", "your" instead of "ur". It makes your posts a lot easier to read, especially for those of us who don't have English as their native language.
You can not really "modify" the behaviour of a method by using a proxy, but you can create a proxy, direct all but one method to the original method and provide a separate implementation for the target method.
This way you'll have two objects with the same interface (not only in the Java sense, but all methods look the same), but differing behaviour: the original object and the proxy.
Now if you pass around the proxy instead of the original object, then it'll look as if you changed the behaviour of your object.

How to change my payment method?

need to change mu paymemt method
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

Hi, Dynah, and welcome to the Community,
This FAQ article explains how to change a payment method:
https://support.skype.com/en/faq/FA10486/how-do-i-update-my-credit-card-details?
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to change System Input Method ?

I tried to write multilingual program.
I have system input method and specific input method code (lib/ext).
How to change System Input Method from a code ?
or
How to handle an event when i chage system input method in the Windows.
(My OS is Windows XP).
I tried to do (for example):
java.awt.im.InputContext ic = this. getInputContext ();
ic.selectInputMethod(new Locale ("ru"));
It doesn't help.

up

HT204053 how to change the payment method

how to change the payment method

Go to http://www.apple.com/emea/support/itunes/contact.html to get the store support staff to help.

How would I change the variables in multiple methods with the user input?

Here is my code for a tic tac toe game I have to do for an assignment, it is currently set at the normal 3 x 3, but the teacher what the user to be albe to change these to between 3-5 before they start playing, here is my codeing
import java.util.*;
public class TicTacToe
Constructs an empty board.
private String[][] board;
private static int ROWS = 3;
private static int COLUMNS = 3;
public TicTacToe()
int size = in.nextInt();
board = new String[ROWS][COLUMNS];
// Fill with spaces
for (int i = 0; i < size; i++)
for (int j = 0; j < size; j++)
board[i][j] = " ";
Sets a field in the board. The field must be unoccupied.
@param i the row index
@param j the column index
@param player the player ("x" or "o")
public void set(int i, int j, String player)
if (board[i][j].equals(" "))
board[i][j] = player;
Creates a string representation of the board, such as
|x o|
| x |
| o|
@return the string representation
public String toString()
String r = "";
for (int i = 0; i < ROWS; i++)
r = r + "|";
for (int j = 0; j < COLUMNS; j++)
r = r + board[i][j];
r = r + "|\n";
return r;
I am having a problem figuring out how to change the variables ROWS , COLUMNS to the given user input, it seems easy but i can't really figure out how to do it
thanks ahead of time

import java.util.*;
public class TicTacToe
Constructs an empty board.
private String[][] board;
private static int ROWS = 3;
private static int COLUMNS = 3;
public TicTacToe()
int size = in.nextInt();
board = new String[ROWS][COLUMNS];
// Fill with spaces
for (int i = 0; i < size; i++)
for (int j = 0; j < size; j++)
board[j] = " ";
Sets a field in the board. The field must be unoccupied.
@param i the row index
@param j the column index
@param player the player ("x" or "o")
public void set(int i, int j, String player)
if (board[j].equals(" "))
board[j] = player;
Creates a string representation of the board, such as
|x o|
| x |
| o|
@return the string representation
public String toString()
String r = "";
for (int i = 0; i < ROWS; i++)
r = r + "|";
for (int j = 0; j < COLUMNS; j++)
r = r + board[j];
r = r + "|\n";
return r;
}sorry for not posting code correctyl new to this forums
Thanks for the help but let me rephrase my question, the rows and columns are the same like 3x3, 4x4 ,or 5x5,
-when the program runs it will ask the user for what they want to set the tic tac toe at between 3 - 5.
My question is how do I get the code
Scanner a = new Scanner ( System.in );
System.out.print("Enter the size of the tic tac toe box to be between 3-5 : ");
int sizeTicTacToe = a.next();to change the variables of ROWS COLUMNS
I just want to know of a way to make the users input of sizeTicTacToe to change the variables ROWS & COLUMNS in my toString() and TicTacToe() methods

How to change F2 to F1 extraction method on datasource?

Similar Messages

Maybe you are looking for