How to change filed length for Infotypes IT0197

Hello Gurus,
I have a requirement from my client regarding IT0197 (malaysia specific)
In the above infotype there is a field called SOCSO number. Currently the filed length defined is 20 characters in SE11.
But on the screen level, if we see it is allowing only 9 characters.
My question is we need to extend this from 9 characters to 12 characters on screen level.
Can we do this w/o access key. I heard we can do this with help of config. Please assist.... its bit urgent.
regds,
babu

Hi.
Can you share how you were able to change the screen field length?
We need to do the same thing at our company, but our ABAPer is not sure how.
Can you share the steps please?
Thanks.

Similar Messages

How to change the lengths of the layout

Hi ,
I am executing one report, output is coming fine but next if i go to print preview for PO number only 9 digits are appearing one digit is missing, actually column is trucated, there in print preview there is one tab called Change Layout, there if i see length of the PO no is 9, so its showing only 9 digits, actually length of the PO no should be 10.in change layout the length is editable i can change from 9 to 10, after that there is a button called copy, then it will show correctly, it works only one time, so each and every time user has to change the length, so can any one suggest how to change that length in the layout permanently, bcos there is no save button there.
Can any one tell me from where all these lengths are coming which are appearing in change layout.Surely its not coming from the report.

Hi friend,
That depends upon the space provided by the ALV column for that variable or the heading size its not based on the data element size.
If you want to be more clear lust count the space available for each field available at the print preview.
The details for that are stored in table T180S just see the documentation available for that table.
And see when the table is getting filled like that so that you will be able to find a solution where and how it is getting populated.
Use column width optimization for getting the correct output.
If you have any queries in this please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 5, 2012 4:01 PM

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to change a color for a row in ALV grid display

Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plz

Hello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks!

How to change material component for a Purchase Order?

How to change material component for a Purchase Order?
I need FM .
PLEASE help

Dear ,
Create PO with item category L....There in Item detail you will get tab for material.
There click in component Button, it will take you to the component screen there you can assign and deassign components.
Hope this helps.
Regards
Utsav

How I change the icon for iTunes songs?

When I drag iTunes songs onto my desktop the icon is white with a gray iTunes icon. How can change this icon for all of my iTunes songs?

Thanks Patrick. I used Control-Click on the actual audio file on my desktop opened the Show View Options menu and turned off the icon preview option. That changed my icons from gray with a white background to red with a white background which is exactly what I wanted. You pointed me in the right direction. Appreciate it.

How to change Apple ID for all applications in iPad2?

I have changed Apple ID via Settings > Store > Apple ID > Sign out my old Apple ID > Sign in with my new Apple ID.... But, by this method, Apple ID in iCloud, Facetime, and iMessage isn't changed follow to my new one! Do I misunderstand about changing ID? and How to change Apple ID for these applications?
PS. I do not want to do hard reset my iPad2
Thank you all for your kindly help ^^

Go into Settings > iCloud > Account > Change to your new Apple ID
Settings > Messages > Recieve At > New Apple ID
Settings > Facetime > Change to new Apple ID

I cannot find how to change the language for labels in a quiz

I cannot find how to change the language for labels in a quiz

You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

How to change the Icon for a JFileChooser ?

Has anyone figured out how to change the icon for an instance of JFileChooser from the coffee cup to something else?
I'm on 1.4
Thanks,
Ken

Never mind. I figured it out.
You have to use an instance of JFrame in the call to showXxxxDialog(Component c). Set the icon of the JFrame to what you want the JFileChooser's icon to be.

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

HT3500 How can change apple ID for updating of programs

How can change apple ID for updating of programs?

You need to delete them and then download them from the desired Apple ID.
(85684)

How to change bucket capacity for a certain date range (duration)?

Hi,
I need to update the bucket capacities of Resource at Vendor location in APO live cache for a particular period using BAPI_RSSRVAPS_CHANGEMULTI.
Here I am executing BAPI by passing -
Import Parameters:
LOGICAL_SYSTEM
COMMIT_CONTROL
PLANNING_VERSION
Tables:
RESOURCE_HEAD
(RESOURCE = Resource " Test123
LOCATION = Vendor Number/Loctaion
CAPACITY_A = 5000.000
NUM_OF_PERIODS = 001
PERIOD = 02 " Day Wise
UTIL_BUCKET = 100.000 )
RESOURCE_HEAD_X
(All corresponding fields X)
RESOURCE_QUANMODEL
(RESOURCE = Resource " Test123
VERSION = 01
ENDDA = 02/25/2011
BEGDA = 02/21/2011
QUANMODEL = 8000 )
RESOURCE_QUANMODEL_X
(All corresponding fields X)
[ I have a capacity variance:
Resource = Test123; Capacity Varient = 01; Valid From = 02/21/2011
Valid To = 02/25/2011; Bucket Util Rate = 100.000; Qty/Rate definition = 8000 ]
Now, while I execute /SAPAPO/RES01 to display Capacity for that resource-Location-PlanningVersion, Its showing that 'Bucket Capacity' and 'SNP Bucket Capacity' get changed into 5000. But this change happend for all the days and not only for the duration I passed into Bapi (From BEGDA to ENDDA).
How to change bucket capacity for a certain date range (duration)? Any help please.
Thanks
Roy

I did it myself. Hence closing the thread.
Solution:
1. Get RESUID from /SAPAPO/RESKEY table by passing Resource as NAME.
2. Call Function Module /SAPAPO/CRES_QUANPROF_UPDATE
3. Call Function Module /SAPAPO/CRES_SAVE_FROM_BT
For further help, change manually a single record in the 'capacity profile' in TXN /SAPAPO/RES01 and debug both the FM mentioned above.
BR
Roy

How to change price total for "Change Unit Cost Estimate Screen" for KKE1 Tcode ?

There is a requirement of bringing the Material Price in KKE1 while entering the Item Catogory M ( M for Material) from the Gross Price in the condition type (P001) that is entered in the Purchase order.Currently systems brings the material value from MAP(Moving average Price) in the Material Master data.
I have looked into the user exit 1) EXIT_SAPLKKEC_001 2) EXIT_SAPLKKEC_002 available in this T code KKE1.When I put break-point in these user-exit,it is not going in debugging mode while fetching the price value in Price total column for "Change Unit Cost Estimate" screen in KKE1.
How will change pricing condition for material in KKE1?
I want to change price condition for material as marked in red as shown in the screen-shot.
Where will write the code such that I will bring Price Total based on material number as shown in the image?

Hi Ram,
I think you can do the same in thei manner.
Go to program SAPMV45A.
use menu GOTO -
> Text Elements----
>Text Symbols
Here make change of Text-002 Sold-To Party as saleable .
Regards,
Pravin

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

How dome change my password for my computer and my username apparently it changed because i was moving things from my old mac

If your forgot the administrative PW for the computer reset the PW
OS X: Changing or resetting an account password
OS X Lion>: How to Easily Reset the Administrator Password

How to change caller id for facetime on Iphone 5?

How to change caller id for Facetime on Iphone 5? I cannot find anywhere I can make the change in Setting.

if it's your caller id, go to settings>facetime
you can be reached for calls at>>> choose where you'd like to be reached at.
that should change where your calls go to

How to change filed length for Infotypes IT0197

Similar Messages

Maybe you are looking for