How to change from inline to promicuous mode in IPS

Good day all,
please i have a problem that i need to reconfigure with my IPS. i configured my IPS on inline mode and is affecting the speed of our network. i was asked to change it to promiscuous mode. please i need a help on how to go about this. will welcome any reply. thanks

Hi, in CLI, you need to find your IPS policy and change the syntax from "inline" to "promiscuous" Check out this link with configuration examples and explanations:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/modules_ips.pdf
This is for version 8.4 so I would recommend that you reference the guide that matches the version of code currently running on your ASA.
I hope this helps!
Thank you for rating helpful posts!

Similar Messages

How to change from 64bit to 32bit mode?

How do i change my mac from a 64bit mode to a 32bit mode?.. Required for internet device to be downloaded..
Also will it affect my mac in any way?
Thanks

To boot in 32-bit mode hold down both the 3 and 2 keys while booting.
http://support.apple.com/kb/ht3773

How to change from FM to AM radio on ipod nano

how to change from FM to AM radio on ipod nano

Meryl-elsbeth,
The iPod Nano only has an FM antenna/receiver. It is not possible to use the AM band on an iPod Nano.

How to change from member to owner 800 # dont work no promps for that

how to change from manager to owner 800# don't work

oops, that was a typo ; prepaid accounts only have Account Members.

How to change from Photoshop CC to Photoshop Photography Program?

Is it possible for me to do this change? I don't mind to get tied for another year.
Please let me know. Thanks!
P/S: I saw some support staff has been helping to cancel the subscription for Photoshop CC and allow them to subscribe the Photography Program, can I have the same treatment as well? Thanks!

Well it’s not easy it seems. Some got help in two minutes others, like us, nothing?????
Perhaps it only works in the USA not in Europe?
Regards
Jean-Luc.
Verzonden met Windows Mail
Van: M Angus
Verzonden: vrijdag 29 november 2013 18:20
Aan: Pick Axe Photoworks
Re: How to change from Photoshop CC to Photoshop Photography Program?
created by M Angus in Adobe Creative Cloud - View the full discussion
Hello, same here too. How do I change to the Photoshop offer.
I have been trying to speak to Customer Services for 2 days now - despite promise to call me back I am still waiting. (At the time of writing I', listening to that damned musak - waiting waiting....)
Cheers
Magnus Angus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5885361#5885361
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5885361#5885361
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5885361#5885361. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Satellite C660 - How to change from 32 bit to 64 bit operating system?

Can some one please tell me how to change from a 32 bit to a 64 bit operating system for my Toshiba Satellite C660 Notebook?
No cds came with my notebook so I can't restore.
I installed the 32 bit when setting up by mistake and would now like to change.
Thanks in advance

>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version.

HT2534 How to change from US apps store to Indian apps store for I Pad

How to change from Us apps store ti Indian apps store to purchase apps

1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".
Make sure you have credit card and address for that country.

How to change Cisco EPC2425 into bridge mode

Hi,
I need help regarding how to chage ECP2425 into bridge mode. I have Wireless NAS drive router which has its own DHCP and NAT service. At the moment my Wireless Timecapsule (NAS Drive) is in bridge mode and connected to EPC2425 with ethernet cable. Everything is fine. But in order to access my timecapsule over the internet, I need to use its (timecapsule)'s NAT service. For this, I need to put EPC2425 which is my first point of access from internet, into bridge mode or atleast disabled its (EPC2425) NAT service. Unfortunately, I am not been able to find NAT or Bridge mode option on EPC2425. I will appreciate if anyone can help me out in this case. I need to change my EPC2425 router into bridge mode or gateway mode.
Thank you very much

Hi Azhar,
Thank you for your question. However, this community is for Cisco Small Business Products and the DPC/EPC2425 is not a Cisco Small Business Product.
Your product is an internet service provider (ISP) supported product. In other words you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
http://www.cisco.com/web/consumer/support/modem_DPC2425.html
http://www.cisco.com/web/consumer/support/prod_modems.html
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

How to change from SLIM to KDM?

Hello,
I'm using the MATE desktop, OpenBox as window manager and SLIM for login.
I'm starting to feel tired of not being able to change between various desktops without closing the main one, I mean, with OpenSUSE Ctrl+Alt+F1 to F6 are terminal ttys (it is so with Arch+SLIM too), Ctrl+Alt+F7 to F12 are graphical ttys, you can change between any of them and log in as any user you want without closing the F7 tty, or closing it, or doing whatever you want. This was petty cool in order to kill some broken task that hanged the screen or in order to do whatever.
May I don't know how to do it with SLIM, but anytime I do Crtl+Alt+F9, for example, I just got a blank screen with an hyphen blinking. With OpenSUSE I got a graphical login screen.
More:
I've got installed OpenBox, MATE and enlightenment. It is suppose me to be able to change between them pressing F1, and in fact SLIM changes where says "session: XXXX" between them at the login screen, but whatever I choose SLIM ALWAYS log me in MATE. I've got to change it manually in ~/.xinitrc and logout and login again every time I want to change between sessions. I cannot do it directly at the login screen.
Sometimes after login out and login in several times SLIM hangs and I have to reboot.
I think all these problems comes from slim, and since with OpenSUSE, that use kdm, I had no problem I want to try kdm as login manager, but I haven't seen any guide to do it if you've got a login manager already installed. I've seen it just if it is the first system installatio. And I'm a little scared of breaking my login and spend too much time fixing it.
How can I change from SLIM to KDM without pain?

WOW, I had to install kdebase-workspace and it installed as dependency a functional kde system . And... I was able to choose between all the other desktops but MATE, so... kdm and all that it installed with it's already uninstalled
But with kdm I was able to open an enlightenment session in tty 8 without closing kde in tty 7...
ewaller wrote:Install kdm.
Disable the slim service using systemctl
Enable the kdm service using systemctl
No need to uninstall slim. Hang on to it until everything is working
Thank you ewaller, it worked perfectly
Scimmia wrote:Well changing to kdm is as simple as using systemctl to disable slim and enable kdm.That won't get you graphical logins on tty8+, though.
So, how can I do it with slim?
Raynman wrote:Do you really need a GUI to kill a program?
No, I don't, it was just an example.
Sounds like your xinitrc isn't quite right, check the wiki page for slim.
I'm tired of reviewing my xinitrc in order to make slim let me choose my desktop. I think the F1 to change the session is experimental. I will open other thread in order to get some help or in order to help SLIM to solve this problem.
And you could try LightDM instead (because KDM probably pulls in some KDE crap). It comes with dm-tool (and a replacement for gdmflexiserver) to start a new session on another tty.
Sounds good. I'll try to make slim work perfectly and if I don't get it to work as perfectly I want I'll try other login managers.

How to change from lowercase to uppercase in Pages for iPad

First: hello!
Basically I got a new iPad and I'm using Pages for some document creation but i can't find how to change the text i selected from lowercase to uppercase, in MacOSX is in the Font Menu but I can't find it in Pages anyone knows how to do this?

Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
https://discussions.apple.com/community/app_store/iwork_for_ios
 Cheers, Tom

Change from MSP to Enterprise mode in Prime Collaboration Assurance 10.5

Hi all,
I googled a lot but I didn't find anything about it.
Is it possible to change from MSP mode to Enterprise mode without the need to reinstall the OVA template again?
Thanks a lot.
Luigi

Hi,
Check this info :
Virtual Machine Requirements for Prime Collaboration Assurance
You must review the Installation Modes and Requirements section to understand the supported installation deployment modes and applications during the Prime Collaboration installation.
The following table lists the virtual machine requirements for Prime Collaboration Assurance application, based on the number of endpoints managed in Prime Collaboration. The virtual machine requirements mentioned in this table is also applicable for Prime Collaboration Analytics and Prime Collaboration Contact Center Assurance. For details on the endpoint quantities supported in each OVA deployment model, see Endpoints and Contact Center Agents Count.
There are no separate Prime Collaboration Assurance OVAs for Enterprise and MSP deployments for Small, Medium, and Large deployment models. During the installation select the appropriate options to deploy the required applications; by default, the Prime Collaboration Analytics is installed as part of the Prime Collaboration Assurance - Advanced Enterprise installation.
For Very large deployment model, there are separate OVAs for Enterprise and MSP. During the installation of the Prime Collaboration Assurance - Advanced Enterprise deployment, you can choose whether to deploy Prime Collaboration Analytics or not.
The Prime Collaboration Analytics application is not supported in the MSP deployment.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-5/upg_mig/guide/Cisco_Prime_Collaboration_Upgrade_and_Migration_Guide_10_5/Cisco_Prime_Collaboration_Upgrade_and_Migration_Guide_10_5_chapter_0101.html
regds,
aman

Satellite P300-19P - How to change from NTSC to PAL?

Everytime I want to display on my TV I have to change the TV from PAL to NTSC as I can't find how to change the S-Video output on the laptop from NTSC to PAL.
Does anyone know how to?
Cheers.

Hey,
Im not owner of Satellite P300 but either you can change this option in BIOS or in display driver. Normally there you have an option to change between PAL and NTSC on S-Video output.
Check this!!!

Qosmio X505 - How to change from 64bit to 32bit?

I just got my new qosmio x505
bij setup I missed the part where you can choose between 32 and 64bit so I have 64bit on it now, but most of my programms wont work now.
How to change to 32 bit?

hi
also from licence perspective it is not allowed. if machine comes with a win7 x64 OEM licence you are not allowed to install win 7 32 bit. (it also should not be possible with the key provided on the licence sticker)
Only if you buy a full version you can choose (NOT OEM!), within the Retail! Version normaly both (32 and 64 bit) DVD's are included but you only allowed to install only one Version on one PC (32 OR 64 Bit) ...if you buy OEM (only allowed with new PC or HDD) you have to buy 32 Bit OR 64 Bit Version. (also no installsupport included in the OEM Versions)
So from this point of view... you have to buy a full retail version of windows 7 or a new hdd with an 32 Bit OEM WIN7 in order to do not have licence issues.
(OEM versions are always cheaper)
Regards
Message was edited by: mosera

How to chang from to 4.3.2 to 4.3.3

how to chang my ipad2 from 4.3.2 to 4.3.3 ?

Apple no longer offers 4.3.3-it is now 4.3.5.
Plug iPad into the computer you initialized it with.
Open iTunes, click on the iPad icon-on the main iPad screen select check for update.

HT4623 how to change from enlarged display to normal display on IPHONE5

how to change enlarged display to normal display on IPHONE 5

Settings > General > Accessibility > Zoom.
This can also be changed when the iPhone is connected to iTunes. Available under the Summary tab for the iPhone sync preferences with iTunes below Options > Configure Universal Access.

How to change from inline to promicuous mode in IPS

Similar Messages

Maybe you are looking for