How to change GR/GI Slip Document Title

Hi Experts,
I would like to ask about how to change the GR/GI Slip document title to another text instead of the "GR/GI slip".
I enclose the picture as a link below.
http://img834.imageshack.us/img834/6846/slip.png
Thanks in advance

In std its not possible. copy the same smartform and ask your abaper to put your logo in this smartform.
Hope this will help ful to u

Similar Messages

  • How to change number range for document type ?

    Dear All
    Experts
    How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as 
    Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
    Message no. FAGL_LEDGER_CUST093
    I have defined a leading ledger in system too with these settings
    1)     Define ledger for accounting.
    2)     Defining currencies for it.
    3)     Defining ledger group for the same.
    4)     Defining accounting principles
    5)     Assignment of principles to leading ledger.  
    Are there any extra settings required for leading ledger settings?
    I have some doubts those are :-
    How document types defined at ledger level?
    How to define them at leading ledger level?  (Like my case)
    Focus on this will be appreciable.
    Regards,
    Sharvari Joshi.

    hi ,
    The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the  number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
    coming to
    1.How document types defined at ledger level?
    2.How to define them at leading ledger level? (Like my case)
    Ans 1. please try defining document types for entry view in a ledger.
    path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
    upon prompt enter the ledger and go ahead creating the number ranges for the document types.
    Hope this helps.
    Regards
    amrutha

  • HOW TO CHANGE COLOR ON LITTLE SUB TITLE BAR UNDER THE HEADING?

    Hi,
    I was successfully able to change the background color on the templates headed, but that little bar under it, that displays the links to your other pages within the site did not change with it, and I have tried everything but have not been successful. How do I do this?
    Thanks
    Jennifer

    Those navbar links are generated by javascript and are not user editable. You can create your own navbar using a Text Based Navbar and then have complete control over font (stick with the Web Safe Fonts), color, size and rollover colors.
    Cyclosaurus has posted an HTML snippet that can change the font style of the navbar of each page that the snippet is applied to. You can find it here: http://discussions.apple.com/message.jspa?messageID=8596966#8596966. This page tells how tol change the navbar test to all caps: http://discussions.apple.com/thread.jspa?messageID=8523772#8523772.
    And the following code, again courtesy of Cyclosaurus will change the rollover color of the navbar on any page the snippet is added to:
    HTML Widget to change rollover color for this page in the navbar above to orange The code used, courtesy of Cyclosurus, is:
    <script type='text/javascript'>
    styleCSS = 'div#widget0 li a:hover{color: orange;}'; // change color to your liking;
    eval(function(p,a,c,k,e,r){e=function(c){return c.toString(a)};if(!''.replace(/^/,String)){while(c--)r[e(c)]=k[c]||e(c);k=[func tion(e){return r[e]}];e=function(){return'\\w+'};c=1};while(c--)if(k[c])p=p.replace(new RegExp('\\b'e(c)'\\b','g'),k[c]);return p}('1=2.3.5(\'6\');1.4.7=\'8/9\';1.4(\'a\',\'b\');1.c=d;2.3.e(\'f\')[0].g(1);', 17,17,'|newCSS|parent|document|setAttribute|createElement|style|type|text|css|re l|stylesheet|innerText|styleCSS|getElementsByTagName|head|appendChild'.split('|' ),0,{})); </script>
    You can see an example of that in this demo page: Misc. Items.
    OT

  • How to change the color of a title bar

    Hello !
    I try to change the color from my title bars, but I fail.
    I tried to change the activeCaption value to an other colour, but that didn�t work. Currently I use a own LAF and set it with UIManager.setLookAndFeel("dpg.beans.GuiWindowsLookAndFeel");
    import javax.swing.UIDefaults;
    import com.sun.java.swing.plaf.windows.WindowsLookAndFeel;
    public class GuiWindowsLookAndFeel extends WindowsLookAndFeel {
      protected void initSystemColorDefaults(UIDefaults table) {
        String[] colors = {
           "activeCaption", "#B0171F" 
         loadSystemColors(table, colors, false);
    }I also used the complete stringarray from WindowsLookAndFeel and only changed that one color. Still no changes.
    Any ideas ?

    import javax.swing.*;
    import java.awt.*;
    class Testing
      public void buildGUI()
        UIManager.put("activeCaption", new javax.swing.plaf.ColorUIResource(Color.YELLOW));
        JFrame.setDefaultLookAndFeelDecorated(true);
        JFrame f = new JFrame();
        f.setSize(200,100);
        f.setLocationRelativeTo(null);
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.setVisible(true);
      public static void main(String[] args)
        SwingUtilities.invokeLater(new Runnable(){
          public void run(){
            new Testing().buildGUI();
    }

  • How to change thousand of FI documents ?

    Hi,
    i want to change thousand of FI documents, it's not possible with FB02 (it will be take a lot of time)
    is there any other possibility to make this change automatically except of creating a Recording (LSMW) ?
    Please advise.
    Regards.

    Hi,
    You can use the GL line item display transaction to perform mass change on "Assignment" or "Line item text"
    Regards,
    Svetlin

  • How to change Switch between open documents keyboard shortcut (default Control + Tab or Cmd + ~)

    I use Control + Tab and Control + Shift + Tab or Cmd + ~ and Cmd + Shift + ~ to switch between tab back and forth alot how do I change the shortcut to something else?
    On Photoshop CC 2014 mac

    No, there isn't. you can't even set your own shor cut keys as you don't know what the documents will be named. Normally you can add short cuts keys but only for those menus options that already exist but your documents will change. I have searched for the answer earlier as I also want it.
    There is in the Pages Help menu an option for  Keyboard shorcuts but nothing is mentioned ther about changing document windows.

  • How to change Font Type of the Title Text of a JFrame?

    Hi,
    I want to set a different Font Type for the Title text of the titlebar of my JFrame.
    Is it possible? Can anyone show me how if it is?
    Thanks.
    Niteen

    Michael,
    Thanks. It works!
    But there was a problem. I was not using the :-
    JFrame.setDefaultLookAndFeelDecorated(true);
    so I have to use it now.
    Is it possible to do it without the default decorated look and feel? Because the default LNF title bar has too much height and I am cramped for space.
    I know that's no excuse. I tried but it doesn't work.. I am using a extended JFrame like this:-
    class Testing extends JFrame
    public Testing()
    setSize(300,100);
    setLocation(400,200);
    Container container = getContentPane();
    /* add components to this container here */
    setVisible(true);
    When I use getComponent() for the container, I get an ArrayIndexOutOfBound Exception.
    When I set the argument to getComponent(0), the font in the title bar is not changed.
    What else should I do?
    Thanks.
    Niteen.

  • How to Change Date Format in the Title of the report.

    Hi Everyone,
    I want to change the Format of the Date in the title(Query run Date)taken by report through the variable "&Date" .
    The Format available is DD-MON-YY
    Desired Format is DD-MON-YYYY.
    Please let me know the same as early as possible.

    Hi NP,
    What I try to do is to reformat the default &date inserted into the Title for Discovere Plus and Viewer. When you edit the Title for the report, you can select the date from the Insert dropdown list to display the date when the report was run. The Date (shown &Date in the Title) has a default format of DD-MON-YY. As I have other date parameters displyed in the Title that have the format of DD-MON-YYYY specified by the user, I want to have the &Data in the same format. Please advise me how to achieve this.
    Thank yiou very much,
    J.K.

  • How to change the residual payment document type?

    Hi,
    When i make residual partial payment then the document type of the residual amt will become DZ/KZ. However this is wrong because all invoices must be DR or KR. How can i change this doc type for residual payments?

    hi,
    its quite simple i beleive .. all you need to do is let me take an example of a customer ...
    while a collecting a payment from a customer you recieve it from  the tcode  f-28
    so once you are on the screen you are asked for a date and doc type also
    this is were you can change the doc type
    regards
    sayeed

  • How to change colours of the document?

    Hi,
    I am working on a form that was build from Microsoft Doc and then scanned onto Acrobat Pro to create the form fields etc.
    Mananagement just told me that they did not like the colour of the document and want it changed to another colour. (from Blue to Green).
    Is there a way where I could 'edit' the colour change using Acrobat Pro ? 
    Unfortunately, I do not have Photoshop nor do I know how to use it.... 
    your help is much appreciated!

    Believe it or not  since the form was created from a scan (a Picture) its uneditiable
    Your going to have to go back into word recreate the document as a document
    Save as an adobe quality PDF from print menu (print menu > Hold PDF button down > Choose Adobe PDF or Adobe quality PDF.)
    Save the original.
    Open Acrobat and add the  Fillout fields. Leave background White.
    go to OfficeMax,Office Depot, Staples, or any office suppy and a couple of packs of the proper color blue paper
    Load up colored paper in Printer and print the PDF.
    It will save you a lot of head ache's
    If its to be filled out by hand You don't even need Acrobat.
    just create the form use a series of Tabs and format the tabs with solid leaders (Format Menu Tabs)
    Type one space after the last word before a tab that is to be a field
    Format that tab for a solid leader.  example "________"
    Fields that go to right edge of paper you shoul use it and set it to 7.5" if your using lettersized paper.
    If you need checkboxes make sure in Word 2011 click developer Tab and you can insert click boxes
    When finished save Document.
    Then save as a PDF.
    In acrobat follow first set of directions. except you can make the check box clickable field when clicked on with insert a chck or an x.
    Hope this helps

  • How to Change Link Color Across Document

    I have a 175 page PDF and figured out how to make all the web addresses hyperlinks document wide. Now, I'd like them all to be blue (right now they're defaulting to black). How do I do this? Thank you.

    Its not easy. in fact it would have been easier to have changed the color first then added the links.
    first open the touch up text by click on its button.
    next click in a blank space before the link, space over with the left arrow key (end key) until just touch first letter of the link.
    now hold down the shift key while  hitting end key repeated ly until link is selected. now from File menu choose properties choose apperance and click the Box that is filled in with a color. chhose apropriate color  click okay until you get out.
    Repeat  the process until all the link colors are changed. By the way the PC version of Acrobat does this automatically. Anotherway Adobe slights Mac Users. And to beat it all were it not for Apple Adobe would have started.

  • How to change the color of blog titles on blog archive page?

    So while I'm waiting for apple to fix iweb's publishing problem, I might as well do a revamp of my site in the meantime.
    One thing I've been itching to change, but can't is the color of the blog titles on the main blog archive page? They show up in red, even when I change the color on the actually blog entry page to blue. Can anyone please help?
    http://web.mac.com/stephenjames716/iWeb/home/blog/blog.html
    Thanks,
    Steve

    All of this style information is contained in the .css files that iWeb publishes. Here is a very informative introduction to editing these files...
    http://www.rowan-cottage.co.uk/Site/CSS%20in%20iWeb.html

  • How to change quotation marks throughout document?

    Hello, so all my quotations in my document are like this
    “It’s a nasty thing to do”
    I want to change them to
    'It’s a nasty thing to do'
    Is there any easy way of doing this? I tried doing them separately but it always made them both the same direction...if that makes sense? So two 66s or 99s.
    Thanks
    Dan

    Find-and-change should work just fine, but there are a couple of special issues with quote marks.
    FIRST: If you put a straight single or double quote in FIND, it will match straight, curly open, and curly closed. (But only for its own 'kind', a single straight quote will never match a double curly one).
    SECOND: if you put a straight single or double quote in REPLACE, it will be replaced with a straight, curly open or curly closed according to the active RULES. Rule #1 is, of course, "Use Typographer's Quotes" -- if this is checked, they will be curly, otherwise they will be straight. Rule #2 is only for curlies: if there is a non-word character to the left, the quote will be "Open", otherwise it will be a "Close" one. Rule #3 is: the style of these quotes will be taken from the language of the text that it's applied to.
    THIRD: to override any of the above, use the Meta-characters for the various quotes. You can use them both in Find and in Change, and you can find the meta-characters in the Online help for your version of InDesign, and in the pop-down menus next to the Find and Change fields. Some that I regularly use:
    ^' in FIND will only match straight quotes, no curlies. Same for ^"
    ^[ will FIND only curly single opens, and in REPLACE will only insert curly single opens
    ^] same for curly single closes.
    In your example, you seem to change double quotes to single ones (why not simply say so? ), but you say they change to two 66s or 99s. Perhaps that's a language thing? In Finnish, for example, both open and close are 99s.

  • How to change content type from Document set to Item

    While creating content type I've selected Item as a parent but after created I can see its showing Document Set as a parent content type. Now can anyone please suggest if possible I can change the parent content type from Document Set to Item.

    Hi,
    From your description, I know you want to change content type’s parent after creating it.
    There is no OOB method to change content type’s parent after you create it. If current content type has not been used, you could delete it and recreate it with your desired base type. Here are similar cases:
    http://sharepoint.stackexchange.com/questions/16131/change-base-content-type-of-content-type
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/b976f17e-99b5-42bb-bc82-8d4123a625cf/change-the-parent-of-a-content-type.
    This article may help you understand the relationship of Content type inheritance:
    https://support.office.com/en-au/article/Create-and-edit-content-types-3d5d45af-608d-4183-8d51-073095fe0312#__toc239159103.
    Best Regards
    Vincent Han
    TechNet Community Support

  • How to change the position of the title bar in XFCE?

    I hate widescreens, but I bought one because only those are sold. There's a problem with them - The amount of text you can fit on the screen horizontally is quite low which means less lines of text and more scrolling. Also, I noticed that at least 50px is taken up by misc title bars and menus. There would be much more space if I got rid of them.
    Unfortunately, getting rid of them is not an option. I need them. I was thinking that it perhaps would be possible to move the title bars of the windows to the side of the window. Mockup of how it would work included. Do you know of any such solution? That would really help.
    Mockup: http://yfrog.com/j4screenshotesp

    Already been requested ( http://xfce.wikia.com/wiki/Wish_List ) but not yet available AFAIK.

Maybe you are looking for