How to change height of highlight

I am highlighting some text in a document that I converted from a web page using the converter in Acrobat. The highlighting height is about 2 lines of text high, so as I highlight one line it also highlights half of the line above and half of the line below the line I am highlighting. This makes the highlighting very imprecise. It's like highlighting with a very wide, dull highlighter. This doesn't usually happen when I highlight documents, but is happening on this particular document. I can't find any means to modify the height of the highlighter. I am using Acrobat Professional X version 10.1.13.
Here's an example:
Thanks for a fix.

The highlighter uses the underlying "box" that defines each word. You'll see it acts the same when you select it with the mouse.
This could be the result of an imperfect OCR process, or a bad PDF engine used to create the file. Basically there's not much you can do about it.

Similar Messages

How to change height of Input/output field in dialog program

How to change height of Input/output field in dialog program.
I want to big message text box like e-mail message box.
so could anybody help me on this please
Thanks
Basu

Hi,
This is not possible directly.Place the icon button in the table field.when u click on that button a popup window will appear in that window place the text editor there u can write text and u can save it ok..
Award points if helpful.
Kiran Kumar.G.A

How to change the Find highlight color

I am trying to find out if there is a way to change the Find Highlight color in office 2013.
Every time I search for a word or anything it uses a light yallow to highlight that line or word, and I woudl like to replace the yellow with like a teal or a green or some other color that I'm not using already in my Word document. This way I can find out
were it is telling me It is because I have a lot of stuff already highlighted yallow, and when I click find and search for something in the Navigation window and it finds it. It also puts it as a lighter yellow and it confuses me.

Hi,
As far as I know, we can't change the highlight color when using Find in Word. The highlight color is fixed.
As a workaround, you can try to use Advanced Find instead which will show the search result with a different color.
Best Regards,
Steve Fan
TechNet Community Support

How to change curves shadow/highlight orientation

I prefer to use curves with the black point in the lower left corner and the white point in the upper right. However, some of my older PSD files, when opened in recent versions of Photoshop, display a reversed curve with the shadows in the upper right. How can I change the orientation back?
It was easy to change the orientation in CS and CS2, but I just can't seem to find where to do it in CS6 or CC.

Thanks for the explanation. I now see that in CS6, if I convert an RGB file to grayscale, the curve orientation does indeed reverse. By changing the curve display mode to ink based, I can get it back back the way I like it.
In which Photoshop version did this change occur? Back in the CS and CS2 days the curve was the same in either RGB or grayscale. I also have CS4, but I can't recall whether that feature is present there or not.

How to change the color of text but only when that text is highlighted

I am NOT asking how to change the highlight color OR how to change the text color generally, but rather, how to change the text color as it shows onscreen while it is highlighted. Here's where I'm going:
Text is ordinarily black (assume) such as when the Finder is open or when viewing a list of all emails in an inbox.
Let's say I change the highlight color systemwide, in prefs > appearance > highlight color, to a custom color ("other") of black (for example).
In certain programs (mail, billings, iBank, addressbook, even the Finder), when I highlight a line of something, (like when I one-click on an email or a file name just to select it but not open it), the line will highlight in black, but the text of that line will automatically change to white so it can be seen.
However, when I highlight actual text (click and drag or double click), such as when editing a document in Pages and selecting a word, line, paragraph, editing an email, etc., the highlight is black, and the text remains black also, which means it cannot be seen (black on black).
So, how do I change it so that when I highlight the actual text the text color changes to white, then when it is de-selected, it goes back to black.
I'm not afraid to do a little terminal/command line, but only if it’s a little. Hope this gives enough detail.
Thanks.

You can use span HTML tag.
For example, if your label is "Product Name", and you want it to appear in red, you can type this:
<span style="color:red">Product Name</span>Hope it helps.
Ravi

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

How to change color of list box highlighting in Acrobat 9 Pro?

When you create a list box in Acrobat 9 Pro you select the default value. That default value displays on the form in a highlighted color. Does anyone know how to change the color of the highlight or ideally make it no color? Thanks.

When you create a list box in Acrobat 9 Pro you select the default value. That default value displays on the form in a highlighted color. Does anyone know how to change the color of the highlight or ideally make it no color? Thanks.

Help me Please..? How to change X & Y co-ordinate and height & width selected content...?

Hi Everyone!
          This is Vijay.I'm new baby to Indesign Script.In my office i took one task for indesign, that's i link one image to picture box that image jump from original position.so i copy that picture box and paste in place to new layer and now link the Eps to that box. againg jump that image. actually (manualy) i copy height,width , center X and Y coordinates from old picture box image and Paste in to newly link image. then link image was perfectly sit in position. any one do for Script or any one help me how to do this..Script.
Thanks in Advance
-yajiv
Sample for ur clarification....

hi Dave!
               Thanks for Quick Reply. Actually i know very well in Java script. may be i finish that script with in 2 weeks. i try to work but i can't that why i post..!
can you tell any idea to solve that problem.now the problem is i can't change height and width. thanks in Advance.
-yajiv
my script is..
    var i,j;
    var mysel=app.activeDocument.selection;
    var myDoc = app.activeDocument;
    if (app.documents.length > 0){
        if (mysel.length > 0) {
            //app.copy();
            var myObj1 = app.selection[0];
            var myObj2 = app.selection[1];
            var vb = myObj1.visibleBounds;
            var vb1 = myObj2.visibleBounds;
            var myWidth = vb[3]-vb[1];
            var myHeight = vb[2]-vb[0];
            var myWidth1 = vb1[3]-vb1[1];
            var myHeight1 = vb1[2]-vb1[0];
            var X=(vb[3]+vb[1])/2;
            var Y=(vb[2]+vb[0])/2;
            //myObj1.deselect();
            myObj.visibleBounds=myObj1.visibleBounds;
            alert(myObj.visibleBounds);
            alert("MyObjWidth = "+myWidth+"\n"+"MyObjHeight = "+ myHeight);
             alert("MyObjWidth1 = "+myWidth1+"\n"+"MyObjHeight1="+ myHeight1);
             alert(myObj.visibleBounds);
        else {
            alert("Nothing is selected. Please select an object and try again.");
    else {
        alert("No InDesign documents are open. Please open a document and try again.");

I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?

I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?

You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
The above works in Notes also. I haven't tried to do this in any other Apple application.
For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default.

How to change the pixel dimension height?

I need to fix the pixel dimension height "768" for tiff images via scripting. Kindly advise me how to change the height for the images.

i am using vb.net i can't able to fix exact width and heigth for my below code
appref.Preferences.RulerUnits = Photoshop.PsUnits.psInches
docref = appref.Open(CheckerPath.Path & \" & InputFile_From_Illust)
TiffSv.ImageCompression = Photoshop.PsTiffEncodingType.psTiffLZW
docref.SaveAs(IllustFolder + "\" + IllustFile.Name, TiffSv)
docref.ChangeMode(DestinationMode:=Photoshop.PsChangeMode.psConvertToRGB)
TiffSv.EmbedColorProfile = False
Dim heg, wid As Double
heg = 768 / 300
wid = 576 / 300
docref.ResizeImage(wid, heg, Resolution:=300)
But its fixing width as 0.46 and height as 0.613 why its happen i don't.
please advise me.

Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?

Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?

Crop to 4x3 aspect ratio, then resize to 800x600

How do you change Matching Tag Highlights color?

I just updated my Dreamwever CC.
I have my code coloring set to be dark. I don't like too much white as the background when I'm coding...
with the new update, I spotted the new change right away, it's great, I like the idea of highlighting matching tags, but I want to change the color to match my color theme and so I can read my codes. this is what I have...
would someone know how to change the color? thank you.

You can change the color of the tag highlight by
Go to DW preferences
Choose Code Coloring
In the bottom you will see tag highlighting enabled with a check mark
Change the color by using the color well below that Tag highlighting preference

How to change the default orientation?

Hello,
     I'm new to Adobe Flash Builder and I am currently making a mobile application for a school project. I was wondering how you change the default app orientation to landscape. I've tried going into my app.xml and change the aspect ratio to landscape with no luck, and it is very hard to find any answers on the internet. I would greatly appreciate your help.
HomeView.mxml Code:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    actionBarVisible="false" tabBarVisible="false" title="HomeView">
          <fx:Declarations>
          </fx:Declarations>
          <s:Image left="0" right="0" top="0" bottom="0" scaleMode="zoom" smooth="true"
                               smoothingQuality="high" source="@Embed('file:///C:/Users/Owner/Downloads/48127-solarsystem-teaser.jpg')"/>
          <s:Button x="-5" y="0" width="410" height="1504"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Sun)"/>
          <s:Button x="444" y="852" width="80" height="80"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Mercury)"/>
          <s:Button x="628" y="742" width="120" height="124"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Venus)"/>
          <s:Button x="836" y="632" width="127" height="117"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Earth)"/>
          <s:Button x="994" y="506" width="99" height="96"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Mars)"/>
          <s:Button x="1255" y="464" width="298" height="279"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Jupiter)"/>
          <s:Button x="1626" y="302" width="274" height="270"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Saturn)"/>
          <s:Button x="1965" y="196" width="175" height="174"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Uranus)"/>
          <s:Button x="2201" y="66" width="175" height="174"
                                skinClass="spark.skins.mobile.TransparentNavigationButtonSkin" click="navigator.pushView(Neptune)"/>
</s:View>
App.xml code:

                    
                    
                    
I need to make it so that the app is permanently in landscape.
Thanks again.
     8th grade student



In XML, everything within  is a comment. You need to remove the :
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>

How to change default vertical page co-ordinates from center, to top?

Hi There,
We're having trouble understanding why InDesign centers the page instead of aligning the view to the top when switching pages (and copying and pasting) - and how to change this behavior.
To understand what I'm talking about, do the following:
Create a new document (any size)
Use the page tool to to change the height
Create a new page and use the page tool to make the height a lot taller
Now switch between the pages
Notice how InDesign always shows you the center of the page?
This is frustrating in many situations like copying and pasting - try the following:
Create a box on the first page and align it to 20mm from the top and 20mm from the left
Copy the box
Switch to the second page
Paste using CMD + OPT + SHFT + P
The object should be pasted in the same spot (20mm from the top and 20mm from the left) but it isn't - on the vertical, it's pasted relative to the center of the page for some reason.
It surprising how annoying this becomes when you're constantly re-positioning pasted items or when switching between web layouts of different heights - it becomes a two step process instead of one.
Does anyone know how to change this behavior?
Any pointers in the right direction would be much appreciated - we're using CS5.5
Cheers
Ben

Thanks for the replies - sorry I didn't reply earlier but they went to junk.
Why in the same spot if pages have different size?
In general, sure - but what about letting the user define a point of reference? For me, it's always the top left corner like the rulers - I completely understand if that doesn't work for others but it would save me so much wasted time constantly repositioning objects.
Also, in a lot of documents with different page-sizes, setting the reference to top left (or whatever you set your rulers to) actually works a lot of the time - granted, probably only for those that use the numbers to position objects.
Anyway, what I'd like to do is find out how to set a document-wide reference point for co-ordinates - obviously you can't do this right?
Another thing that wastes time (in a similar vein) is the ability to set defaults for translation, rotation and flipping etc.
Almost without fail, I find I want top left when moving (because I set rulers to top left) but center for rotation and flipping. Being able to set a default per translation type would save a lot of pointing and clicking.
Is this possible?

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change height of highlight

Similar Messages

Maybe you are looking for