How to change host file?

Hi guys,
I would like to install 9iAS 9.0.2 Oracle Portal on my XP machine.
Problem:
My host like this:
127.0.0.1 localhost
AND my computername contains an UNDERSCORE.
How can I change the hosts file? And how must it look like? I have no fix IP Adress at the moment.
Thank you for help.
cheers,
Bernd

in short...
You'll need a static IP address
your host file will look like
127.0.0.1 localhost
10.1.1.10 www.server.com www
where 10.1.1.10 is your static IP, and the www.server.com is the name for which you want to access your portal site.

Similar Messages

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to access host files?

how to access host files?

Easy and not depends on your software version:
press Shift+cmd+G while your finder window is open and active, you will get a new window with the field where you can write /etc/hosts
Anyway to edit hosts file you should open it with the sudo command, this can be done in terminal window, not in Finder. Also easy and can be done next way:
press Shift+Cmd+U while Finder window is open and active, then choose Terminal.app, and after it opens enter sudo nano /etc/hosts. You will be asked for password - this is the password you enter then you installing new application. You should know few commands to edit your hosts file:
Previoius page/Next Page of the file - Ctrl+Y/Ctrl+V
Add record - Input the text you need on the last free line of the file and then press Ctrl+O
Delete record - put cursor on the line you want to delete and press Ctrl+K
Undo - Ctrl+U
Exit - Ctrl+X
After edit your hosts file you should update DNS records - in terminal window enter the command dscacheutil -flushcache
But if you really don't know what are you doing, my advice is do not touch your hosts file, ask for professional to do his job. Just like I'm doing usually. )))

How to change pdf files to word

how to change pdf files to word?

Hi Reyesnancy,
Please visit the links mentioned below and purchase the subscription as per your requirement.
http://exportpdf.acrobat.com
https://www.acrobat.com/createpdf/en/home.html
After you puchase the subscription, login with your credentials and use the service for conversion.
Let me know if you have any other question,
Regards,
~Pranav

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How to change tif files to jpg files

how to change tif files to jpg files

Under what circumsatnces?
Preview will convert to jpg-> save as (option key)

How to change the file name of pdf file in html page?

Hi,
Actually my requirement is to upload 50 PDF files containing javascript in each file into flex page with the help of one html page.
i did the the javascript part by using batch processing.
now i want to call those pdf files one after another without changing the file name in html page
the code written in html page is
<html>
    <body>
        <object id="PDFObj"
                data="http:\\localhost\pdf\20090807 - Batch 630.pdf"
                type="application/pdf"
                width="100%"
                height="100%">
        </object>
        </body>
</html>
So every time i have to change that file name to acess another file.
Is there is any other way to sort this problem????
Plz anyone help me to sort out this problem with some code or some example.

I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's". What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix). You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code. You will have a list of 50 links. If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters. One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script. Again, I don't know how it works. I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change host name

HI All,
In the em console , all the urls hostnames are invalid , So the URLs are not working proerly.
ex:
http://*2002:4b90:1bf3:16:b43a:e855:c778:a869*:9001/wsm-pm
How to change this hostname in em ? Please help me ot this issue.
Thanks
Govindan P

hi Govindan,
You can use virtual hosting for changing the hostname.
Regards
Fabian

How to change host for database target?

Hi 2All!
We've just moved our production database to a new server.
How to change hostname on this database target for continuing to collect information about this database without deleting or creating additional targets?
EMGC 11gR1.
Thanks!

..so agent was installed on new host ?
or you now need to install the agent ?
I don´t know a way to change hostname only new discovery credentials on host.
*T

How to change host in iview

Hello colleagues,
How to change the hostname in iview? i have portal 7.30. Is here?
Is this system?
the configuration of the host system is associated with the landscape overview?
Thanks.

Hello there Víctor!
Your assumption is correct. The iViews reference a System Alias, and the System Alias belongs to a System Object.
The System Object is a portal representation of the actual system to which the portal connects to retrieve the expected application. Following you can find a good explanation:
How to Create System Object in the Portal for Connecting to SAP backend System - Portal - SCN Wiki
Hope to have clarified your question!
Cheers,
Armando

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change local file Permissions as a default

I have a mavericks Imac with certian permissions on a folder. when users copy and paste the folder on a server for others to use, some users are not able to acess the files.I know how to change the permissions on the folder manually. But I want to know if there is a way to make my own default permissions to stick with the profile for making new folders?
I have looked into booting to an OS CD and choosing default permissions for files and folders, but I dont see how that will change anything, becuase I don't need to reset the permissions, i need to be able to give access to certian users automaticaly.
any ideas?

Sounds like you are not using ACLs. When you double click your share point in Server.app, how many entries do you have in the Permissions window? If you have only 3 then you are not using ACLs which explains why your permissions are not inheriting. POSIX permissions, the base three of owner, group, and everyone, do not inherit. You need to add at least one more permission entry to the table. This is called an ACE (access control entry). Together, you are building an ACL (access control list). Try not to use users. Always add groups if possible as it is easier to manage and never requires propagation of the permissions.
R-
Apple Consulting Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

How to change host file?

Similar Messages

Maybe you are looking for