How to change host in iview
Hello colleagues,
How to change the hostname in iview? i have portal 7.30. Is here?
Is this system?
the configuration of the host system is associated with the landscape overview?
Thanks.
Hello there Víctor!
Your assumption is correct. The iViews reference a System Alias, and the System Alias belongs to a System Object.
The System Object is a portal representation of the actual system to which the portal connects to retrieve the expected application. Following you can find a good explanation:
How to Create System Object in the Portal for Connecting to SAP backend System - Portal - SCN Wiki
Hope to have clarified your question!
Cheers,
Armando
Similar Messages
-
How to change host name for management agent.
Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
MatinHi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu -
How to change host name and domain name in installed Cisco Meeting Place Express 2.0?
Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey BondarenkoHi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name: cumpxvoice
RTMP host name: cumpxweb
Domain name: uclab.com
Service bindings:
Audio: port 1 (eth0)
Web browsing (HTTP): port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address: 10.62.60.116
Network mask: 255.255.255.0
Default gateway: 10.62.60.1
Link setting: autoneg on
Port 2 (device eth1):
IP Address: 10.62.60.117
Network mask: 255.255.255.0
Default gateway: 10.62.60.1
Link setting: autoneg on
Static routes:
Destination Gateway Network mask Port
0.0.0.0 10.62.60.1 0.0.0.0 1
DNS Servers:
10.62.60.115
10.0.1.4 -
HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?
i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.
As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM -
HI All,
In the em console , all the urls hostnames are invalid , So the URLs are not working proerly.
ex:
http://*2002:4b90:1bf3:16:b43a:e855:c778:a869*:9001/wsm-pm
How to change this hostname in em ? Please help me ot this issue.
Thanks
Govindan Phi Govindan,
You can use virtual hosting for changing the hostname.
Regards
Fabian -
How to change host for database target?
Hi 2All!
We've just moved our production database to a new server.
How to change hostname on this database target for continuing to collect information about this database without deleting or creating additional targets?
EMGC 11gR1.
Thanks!..so agent was installed on new host ?
or you now need to install the agent ?
I don´t know a way to change hostname only new discovery credentials on host.
*T -
How to change host name for SLD
Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
AlexHi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu -
how do i changing host name after install. it never asked me for one and now its stuck on unknown.
Recent forum threads have started like this one,
then got completely out-of-focus and derailed.
e.g.
http://forum.sun.com/jive/thread.jspa?threadID=106335 from Sept '06,
which references a thread from Aug '06, with 80+ replies inside it ...
http://forum.sun.com/jive/thread.jspa?threadID=105923
Your Ethernet connection and your system hostname are not going to work,
if you don't have a compatible network adapter.
You won't connect to anything, and the OS can't associate its FQDN,
without hardware that works.
Have you reviewed the HCL, and compared it with your hardware?
http://www.sun.com/bigadmin/hcl/
You may need to install 3rd party drivers for the NIC,
or you may need to buy a replacement card that is compatible.
Boot the system. From a terminal window, as root user, do ...
# ifconfig -a <enter>
Does the output from that command list anything in addition to the virtual loopback adapter?
Copy and paste the complete output back here into the forum thread,
so that others can see what you are seeing.
If the loopback LO0 is all you have, then you're going to have to fix that
before going any further in this discussion. -
How to change host name or host ip in AIA after installation
Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos -
How to change host to just use "machine name" in URL
I've installed WebCenter Suite on a MS Windows machine. Due to the ip setup I also had to install the Loopback adapter to get things to work. Now everything seems to run, but the URLs always have my machine name plus the domain it's on. Since I need others to be able to access this installation, that's an issue and I need the host to just be my machine name instead of the machine name and full domain. For example, right now the wiki would be accessed:
http://MyMachineName.mydomain.com/owc_wiki
I need the URLs (and the redirects that occur) to always work like:
http://MyMachineName/owc_wiki
I guess the basic question is.. how do you change the "host" within a WebCenter installation?
Thanks in advance.Hi DDDDD(etc),
Check out the Oracle Application Server Administrator's Guide section 7.2 - it details the instructions.
http://download-uk.oracle.com/docs/cd/B32110_01/core.1013/b32196/host.htm#BHBBJEBF
Regards,
John -
How to change host file?
Hi guys,
I would like to install 9iAS 9.0.2 Oracle Portal on my XP machine.
Problem:
My host like this:
127.0.0.1 localhost
AND my computername contains an UNDERSCORE.
How can I change the hosts file? And how must it look like? I have no fix IP Adress at the moment.
Thank you for help.
cheers,
Berndin short...
You'll need a static IP address
your host file will look like
127.0.0.1 localhost
10.1.1.10 www.server.com www
where 10.1.1.10 is your static IP, and the www.server.com is the name for which you want to access your portal site. -
How to change Host and domain name on APS 10g R2
Hi,
I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
Thanks and Regards.
KhawarHi,
Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
if you check the report with GETSERVERINFO via browser it says
"REP-51002 Bind to report server AAAAA failed. some one have idea."
some one plz explain me how can I fix it.
Thanks and Regards.
Khawar -
How to change Host directory location?(Problems with host and ed)
Hi I'm having a problem with the commands Host and Ed. The problem being that when I run them they send back an error saying
SQL>host
/bin/gnome-terminal: No such file or directory
or
SQL> ed
Wrote file /home/joe/Documents/editfile.sql
/bin/gnome-terminal: No such file or directory
The problem is that /bin/gnome-terminal is not the correct location for my terminal directory, /usr/bin/gnome-terminal is. Are there any suggestions how I can be able to change it? I'm running SQLPlus 11.2.0.1.0 and I'm using ElementaryOS(made from Ubuntu). Let me know if there is any other information needed to help fix this.This is not a SQL or PL/SQL language question and thus off topic. As it is Linux o/s related, I think it is better suited for the Oracle Linux forum space.
My guess is, from the little info posted, that your TERM environment variable is not correctly set. -
How to change code in IView (JSP)
Hi:
I need to remove some functionality from a standard MSS IView application, since the application is an IView I cant remove part of the functionality from the Portal, How I can edit and change the Code? I think it is a JSP application.
Thanks!
ZeusHi,
Configuring Business Package
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
Regards,
Beevin. -
How to change HOST Name without a reinstall in XI 3.1 ?
Is it possible to change the host name in XI 3.1 without reinstall ?
1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos
Maybe you are looking for
-
I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?
-
Placed images will not show in High Quality
I have several documents that have raster images placed in them. The images are 300dpi, saved as EPS, CMYK, preview of 8bit Mac, maybe around 25mb. I place them in InDesign, and choose the "rasterize postscript" option. When the image is placed, it l
-
How to get the group totals in report
HI, Iam generating a report to display Storage Location, and Unit of Measures and Material group and also group totals. how to display the group totals on the report. thank q rushi.
-
Given all of the Oracle Project solutions out there (EBS, Primavera, Fusion, PeopleSoft), which of these is the best choice for a company that would like to do resource allocation, forecasting, etc? (taking Oracle's longterm vision in this area into
-
I am creating a new Entitilement Segment. When I sync, I get a parsing exception. The error stack is described below. The same error message is displayed while starting the server. Any help is appreciated. Kumar URI : /contentselectors/GlobalContentS