How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

Similar Messages

  • How to change the "name of column" property of an text item in runtime?

    How to change the "name of column" property of an text item in runtime?
    I look the properties of items in help and found nothing about this!
    It's possible?

    Hi,
    an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
    First create block and add items
    The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
    Set into items the column name property to col1 , col2 ...
    At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
    in this way you can change the source of column value.
    Caution because if you change value type from varchar2 to date you must cast date into varchar2.
    May be that this way is valid only for view data not for insert-update, i don't remember.
    bye
    Message was edited by:
    Killernero

  • How to change the name of a BADI Implementation?

    Hello experts,
    Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
    Thanks in advance,
    AK

    Hi,
    Please go to transaction SE19, enter your implementation name.
    Then go to menu: Implementation -> Rename -> ...
    Regards,
    Ferry Lianto

  • How to change you name in iCloud

    My dad regestard my iPad onto his name then I had to change my name on iCloud because when I send email on my iCloud email address it says Philip on it. I don't want people to laugh at me so I changed it my name now my dad got me an iPhone and he regestered it on his name and in my iCloud email it says Philip instead of sofia I want my iCloud email address to have my name on it not my dad's I can't remember how to change the name. Please tell me or I will never use my iCloud email address ever again.

    I have the same problem, and I trued doing what you did and change my name but it still doesn't say my name(I'm a girl and the name is a guy's)

  • Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

    Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

    Go to the open dialog in Pages and select iCloud.
    Click on the folder that you created on iCloud to open the folder.
    On the lower half of the window (the open folder) click on the name of the folder.
    Once you click and select the folder's name it should be editable.

  • How to change datasource name based on the partition in configplan

    Hi
    Can any one please give me some solutions regarding how to change datasource name based on the partition in
    configplan.
    can't we do this in configuration plan?

    If you want to change template based on parameter. you have to use below syntax
    v_layout boolean
    V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
    ,template_code => 'HUBAPAPN' -- template name
    ,template_language => 'en'
    ,template_territory => '00'
    ,output_format => 'PDF');
    Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
    Thanks
    Kamalakar

  • How to change the name of column in ActionScript?

    I possibly know how to change the name of the column in DataGrid using mxml but dont know how  to change the name of column in  DataGrid using  ActionScript.
    var newDataGrid:DataGrid=new DataGrid();
         newDataGrid.dataProvider=arrayCollection():
    It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
    Please HELP!

    Give your datacolumn and id.  Then set the property for that column through the datacolumn id.
    DataGridColumn id="nameDC"
    Script:
    nameDC.headerText = "Name";

  • HT204053 Our Apple ID is ok and functioning.  However, I just came on as the IT for the group and cannot find how to change the name.

    Our Apple ID is ok and functioning.  However, I just came on as the IT for the group and cannot find how to change the name.

    Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

  • Can anyone tell me how to change the names of the networks I have set up on Airport Express

    Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

    Hi mkl1961,
    Happy Holidays!  The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.  
    Resetting an AirPort base station FAQ - Apple Support
    http://support.apple.com/en-us/HT3728
    What default settings will my AirPort base station have after a hard or factory default reset?
    AirPort base stations are set to request an IP address by DHCP.
    AirPort base station passwords are "public."
    AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    *A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port.  You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
    Airport Express Setup Guide
    manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
    I hope this information helps ....
    - Judy

  • How to Change Computer Name

    Two questions...the first is to find out how to change the name of a computer. When I pulled data of of my previous Mac, the name stuck onto the new one.
    Secondly...an old email address keeps popping up in my keychain. Anyway to get in and delete that?
    Thanks for any help.

    I recently added another iPhone to the Mac inventory and up initializing, it asked if I wanted to make a certain email address my default. I've not used that address for quite a while. I've seen this address pop up a couple other places too, so I'm wanting to retire it for good.
    Thanks for you help on the first question.

  • How to change of NAME and IP after RAC installation.

    Hi Friends,
    I have a challenge here...Would appreciate if anyone can help me..
    I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
    My issue is now the server names and ips are set and I am going to install the RAC.
    But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
    Because according to their server naming standards, current production servers are having the acceptable names and ips.
    The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
    After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
    Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
    Any metalink notes or commands as it is........
    Thank you,
    Mahesh.

    Hi,
    You can change the IP later but you can not change the hostname of the system.
    You have to install CRS freah if you want to change the hostname of the system.
    Please let us know which IP you want to change.
    You can see the metalink Note.276434.1 for VIP or VIP hostname change.
    Regards,
    KK

  • How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    Hi mujabee1111,
    Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
    Download CS5 products
    Regards,
    Sheena

  • How to change the fully qualified host name

    Hi,
    how can I change the fully qualiied host name?
    Regards
    Marc

    Hi Michal,
    I'm doing the FlightSeatAvailabilityCheck-Scenarion of the demo example and get an error. To get more details about the error I had a look in the XI Runtime Workbench. There I can see, that the wrong url is called (without the hostname) and  that the access is forbidden (403). Therefore I want to change the fully qualified host name. I knew that I have to change icm/host_name_full but I don't know where I can do it (which transaction)?
    Regards
    Marc

  • How to change my name on icloud

    I changed my name recently.  I updated my name on iCloud, but on photostream, it still does not register as my new name.  How to I make the iCloud change effective on photostream?

    Have you found a solution to this?

  • Existing cross Reference: how to change the name of the file it refers to?

    Hi everybody,
    I am a professional translator.
    One client of mine sent me a complete FrameMaker 9 book file for translation.
    I translated the content via a CAT-Tool and now am in the process of checking if cross references and markers are ok directly into the file.
    I noticed that many cross references are linked to another file of the book. But in the process of translating each file separately, I gave them a slightly different name (I added the language at the end) so as to be able to recognise them eventually.
    Now I have this problem: I cannot find in the cross reference interface where to change the name of the file into the new one the cross reference is supposed to refer to.
    Am I right in wanting to change the file reference? If so, how do I do that?
    Or is it better to avoid this task and rename the translated file into their original names ? Would it work then?
    Thanks for your help.

    ... book file ...
    ...  each file separately, I gave  them a slightly different name (I added the language at the end) ...
    I'm guessing that you renamed the component files by means other than using the Edit > Rename File from the Book menu.
    If so, do over. Rename from the Book menu. It automatically revises all the cross-references in all the component files.
    In a Book, the only thing that's safe to rename with the file manager is the .book file itself.

Maybe you are looking for