How to change IP adress of wireless controller 2504 . from GUI

how to change IP adress of wireless controller 2504 . from GUI

In the existing setup, does WLC management & APs are on the same vlan ? If that is the case you may have not configured any of the below, as AP L3 broadcast reach WLC & in that way AP will learn about WLC.
If WLC & APs are on different vlan you may already use one of WLC discovery method listed below.
1. DHCP Option 43
2. DNS
3. UDP broadcast forwarding
4. Static configuration
When you change the WLC management IP address, AP need to know what is the new IP & you can modify the configuration of the method you used.
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

How to: Change MAC adress on ps3 controller?

Hello.
I want to change my ps3 controllers MAC adress so that I can pair it to my android device.
There are instructions on this site: http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
"Command line utility version of 'sixpair' for OSX can be downloaded from here. Modified source code can be found here. This utility requires libusb, which can be downloaded from http://www.ellert.se/twain-sane/. Choose the binary for your version of OSX."
But I can't figure out how this works, so now I'm wondering if any of you either
1. can explain
2. know of an app that does this
3. has another way

I'm looking for an app that can fix this that runs on 10.8. I've seen other similar threads under respective osx version forum.
Do you have any suggestions which forum I could post it under if not here? I didn't really find a general forum.
/ Jonis

How to change the paper format in SOST tcode from X_65_80 to X_65_266?

I got data from OTF in SAPSCRIPT and send by email.
How to change the paper format in SOST tcode from X_65_80 to X_65_255?
I need to change it automatically from abap.
Any suggestion?

Hi,
       change line size and line count in report.
        By default report line size and line count is taken in printer
       settings
REgards
amole

How to change the browser used for Google search from context menu of selected text?

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How i change my interface language of photoshop cs6 from english to arabic

how i change my interface language of photoshop cs6 from english to arabic

Check this post out it may help? Change language

Solman how to change IP Adresses of servers

Hi,
we were using virtual ip adresses (other server names) for the database servers. These IP adresses (server names) does not exist any longer after changing the outsourcer. Now I want to change this values in SMSY, but exactly thist fiel is not accessible because the data source for this information is "SYSTEM RFC" does anybody know how to change this values?
I do not want to delete all the servers and reconnect them ...
Thank you.
Best regards,
Christian

Hello Christian,
If your data source is set to come from SLD - which should be for Solution Manager and Managed systems - the job LANDSCAPE FETCH is scheduled to run overnight and send the data from SLD to SMSY.
You can go to SM37 copy the job and release it for a instant update.
Best regards,
Guilherme Balbinot

Wireless Controller 2504 with CAP1702i

I have installed and configure Cisco 2504 wireless controller. Also attached a AP(AIR-CAP1702i) in PoE port. But it's not showing in controller and also not showing SSID.
Please suggest.

Searching WLANs
You can search for specific WLANs in the list of up to 512 WLANs on the WLANs page. This feature is especially useful if your WLANs span multiple pages, preventing you from viewing them all at once.
To search for WLANs using the controller GUI, follow these steps"
Step 1 On the WLANs page, click Change Filter. The Search WLANs dialog box appears (see Figure 7-4).
Figure 7-4 Search WLANs Dialog Box
Step 2 Perform one of the following:
•To search for WLANs based on profile name, select the Profile Name check box and enter the desired profile name in the edit box.
•To search for WLANs based on SSID, select the SSID check box and enter the desired SSID in the edit box.
•To search for WLANs based on their status, select the Status check box and choose Enabled or Disabled from the drop-down list.
Step 3 Click Find. Only the WLANs that match your search criteria appear on the WLANs page, and the Current Filter field at the top of the page specifies the search criteria used to generate the list (for example, None, Profile Name:user1, SSID:test1, Status:disabled).
Note To clear any configured search criteria and display the entire list of WLANs, click Clear Filter.

OJ 6500 E709n, W7,How to change which home network computer receives scan from the printer?

Only one computer of the three on my home network can receive any scan from this wireless printer. It was the first one set up to do that.
That computer is now away at school. How can I change the computer on the network that will receive the scan?
I have tried to change the printer from the printer's Set up on the printer's face, but it only shows the one computer and I can't figure out how to change it to another printer.
Thank you for your help.

Hi AtlArchitect, and welcome to the HP Forums.
I see you are looking into connection options. Due to the age of the printer, there is not software to connect to Windows 7. You do have the option to connect with a USB via the Windows basic print driver. You can find more information here:
Installing the Printer Software in Windows 7 for a USB Cable Connection
Please let me know if you have any questions. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Transfer of Licenses on Wireless Controller 2504

we have two controllers, they were initially set up to operate independently but are not set up as Primary and Secondary with N+1 fail over. Can the licenses from the secondary controller be transferred to the primary?
wireless controller is 2504

Hi
Did these WLC only have base AP license or adder license.
Base AP: *** You cant remove base-ap license from WLC and transfer to other.
Adder : *** Yes you can transfer adder license from one WLC to other.
Permanent or base licenses—These licenses are programmed into the controller hardware at the time of manufacturing. These licenses are base count licenses that cannot be deleted or transferred.
Adder licenses—These licenses are wireless access point count licenses that you can activate by accepting the RTU EULA. The EULA states that you are obliged to purchase the specified access point count licenses at the time of activation. You must activate these licenses for the purchased access points count and accept the EULA.
To know more contact Cisco TAC.
Regards
Dont forget to rate helpful posts

How to change AppStore when still have remaining credit from gift cards?

How can I change my AppStore from the USA to Bulgaria when I still have remaining $0.81 in my account. It wouldn't let me change my AppStore Country. And now Im stuck with these $0.81 that I don't need and I can't spend on anything because apps start from $0.99 each. So I need some advice. Please help me! Tell me how to get rid of the money and how to change my AppStore Country Thank you!

If you can't spend it then you can try contacting iTunes support and ask if they can remove the balance for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How to change RTS Threshold in Wireless LAN Controllers

I've read some opinions that lowering the RTS threshold can help in some noisy wireless environments. I have found how this can be done on standalone APs but cant seem to implement the change on a WLC 2112. Does anyone know if this is possible and how to do it. Thanks in advance.

According to Cisco this feature does not exist in controller-based environments. This is what I get when I try to configure the RTS setting from the CLI:
(Cisco Controller) config>slot 1 rts threshold 1024
enable rts/cts only available for Mesh APs.
I have submitted a feature request so we'll see what happens. Thanks for reading and please let me know if you have any pertinent information.

How to change SSID for Linksys wireless switch for PC?

imac-G5 Mac OS X (10.4.4)

Now, let's try to brake this issue down:
I need the Linksys to get a PC (Dell) running wireless. I installed a motorola PCI card for ethernet & the software that came with it in the PC. The switch does not read the network.
This involves a networking issue on a PC running Windows
The last time I spoke with Linksys they suggested http://192.168.1.1/same address, also 192.168.1.225. I get network connection errors.
This is an issue of your network setup
I have my Powerbook hard wired to the Motorola wireless router. My I-Mac is wireless.
So PowerBook & iMac work fine. Right?
You also have a Motorola Wireless Router, is this also your broadband modem?
I hooked up the Linksys switch to the modem with ethernet cat 5 cable. I still get connection errors. Neither computer can access these links. I get Motorola's broadband page with 192.168.1.1. I've done as much as I know but can't change the ssid if I can't access the Linksys switch. HELP Please!
This is a bit confusing:
What do you mean by connection errors? Unable to connect, able to connect but the connection drops?
Try this:
Shutdown your PC and both of your Macs
Turn of the Linksys switch and unplug it from the Motorola Router
Unplug the PowerBook which is wired to the Motorola and directly (with the same ethernet cable) connect it to the Linksys switch
Turn on the Linksys switch
Turn on your PowerBook
Open Safari or any other browser and go to: http://192.168.1.225 or http://192.168.1.225 (or whatever address Linksys told you)
Configure your Linksys switch (Change SSID) and save new settings
now, if everything goes fine, then:
Connect the PowerBook to the Motorola Router (just as it was before)
Connect the Linksys switch to the Motorola Router via an Ethernet Cable
Try to connect (from your PowerBook via Safari) to the Linksys switch@ http://192.168.1.225 or http://192.168.1.225 (or whatever address Linksys told you)
Keep the iMac and the PC shutdown untill you manage to set up the Linksys switch propperly
Post back feedback
a few Macs running 9.x, a bunch of Macs running 10.4.x and some serious SGI workstations running Irix 6.5.x
Message was edited by: fu

How to change Ip address of Wireless network from telnet

Dear all
Please detail guide me change IP address of WLC and AP using telnet? What is fist change WLC or AP ?
Thanks

It would be better to understand what is the current IP address and vlan and what you are trying to change to. You can always telnet and ssh to the WLC and change the WLC IP address, but the IP address for the APs can be changed from the WLC GUI or CLI if the AP's are static. If the AP's are getting their IP address from dhcp, then you don't really have to do anything, just reboot the AP for the ap to get a new address. The reboot can be done from the WLC GUI or CLI or just be shutting down the PoE port or disconnecting the power injector from the unit if your using power injectors.
Sent from Cisco Technical Support iPhone App

How to change the column value which is coming from DO by a calculated field?

Hi all,
I want to change a column value based on my calculated field value. I have a column which is coming from DO which is based on External Data Source. I have a calculated field in my report. When there is any change in the calculated field then the column which is coming from DO needs to be changed. It means the DO needs to get updated when there is a change in the calculated field. Or like if the calculated field meets some condition then I need to change/update the same in the DO. This has to be done on the fly. the report should not submitted for this. when there is a change in the calculated column the DO column needs to get updated.
Thanks,
Venky.

Ok, I've been a customer for very many years, I'm on a fixed retirement
income. I need to reduce my bills, my contract ends in Dec. I will be
pursuing other options unless I can get some concessions from Verizon. My
future son-in-law was given this loyalty plan, so I know this is a
reasonable request. My phone number is (removed) acct number
(removed)
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How to change report displayname at runtime when run from the report server?

hi all,
with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
        private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
            string po = e.Parameters["Order"].Values[0];
            this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
thanks for any tips,
sff

Hi sherifffruitfly2,
According to your description, you want to change the display name of report in Report Manager. Right?
In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
It will show the report name with execution time when we run the report:
Reference:
Built-in Collections in Expressions (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to change IP adress of wireless controller 2504 . from GUI

Similar Messages

Maybe you are looking for