How to change keepalive between active and secondary sup on 6500

how can I change the default keep alive time between redundant sup modules.

There are several types of redundancy for the 6500 series. The only one (that I know of) that allows you to change the keepalive timers is when you are running active-active mode for the MSFCs. You can run active-active mode on the MSFCs when running in hybrid mode. To change the keepalive timers you simply change the HSRP timers on each VLAN interface on the MSFCs.
But, I think most of this has been deprecated. It all depends on the IOS version you are running.

Similar Messages

How to switch between primary and secondary langua...

Hi guys,
I've got an e52 but the only way to type in sec. Language while writing a message is:
Option-> Input Options-> writing language-> primary writing language (which must be changed to new one)
so there is no use of second. lang. or at least I don't know how to switch quickly between primary and second language without going that path.
ANY HELP WOULD BE APPRECIATE.
Aram

HI Everyone,
not sure if this helps. My solution is more fo Singpore users.
As i text between English and Chinese, I was unable to set my Secondary language to Chinese as there is no option to do so in the Writing language menu.
By discovery, i first set my Primay language as Chinese. Then further down the Language menu there is this option Default input. Click on that and select the default using Text case and select Ok.
When writing sms, you can switch between this 2 languages using the # key.
Hope it helps.
Have a pleasant day.
Aram_ocp wrote:
Hi guys,
I've got an e52 but the only way to type in sec. Language while writing a message is:
Option-> Input Options-> writing language-> primary writing language (which must be changed to new one)
so there is no use of second. lang. or at least I don't know how to switch quickly between primary and second language without going that path.
ANY HELP WOULD BE APPRECIATE.
Aram

In Mountain Lion how does OS select between ethernet and WiFi when both are activated??

In Mountain Lion how does OS select between ethernet and WiFi when both are activated?? How does OS use "both" networl accesses??

It will pick the highest service in the list which has an internet connection.
To order the list, open Network System Preferences and select Set order of network services from the button below the service list.

Sync config between active and standby CSM

Is there a way to sync config between active and standby CSMs? Just as one that in CSS.
How about two SSL Service module in two different 6500 chassis?
Thanks.

HI,
there is right now no command to commit redundancy between two CSM-Modules. Maybe in the future there will be one. Okay in regards of sync the only way is to check for redundancy is the show mod csm x ft command. But be aware that some slight differences like a real not being in service are sometimes not recognized.
In regards of the SSLModule there is no way as far as I know to sync them. This won't be present in the future in my opinion as there are certificates which require a password or something like that and one won't be able to do redundncy without those passwords. So In my opinion no way to sync two SSL-Module because of security issues.
Kind regards,
Joerg

How to place content between header and tabs?????

i have header part which has to be constant through out the portal but below that i have 3 links
like I AM employee,employer,broker..
which has to be shown only in home page above tabs..
how can i achieve this..
how to place content between header and tabs..:(kindly help..

Hi Samiran
Try these approaches and see if that works.
1. In the Header Section, you header footer shell and add a Header Portlet. This Header Portlet associated JSP file will have all static content in the top section. In the bottom section, add these 3 links say to right hand corner. Show these links only based on some request property like isHome. Now for the main book having Home and other page associate a BackingFile. Within this backing file in the lifecycle methods like preRender or handlePostBack, get instance of BookManager and all the pages and see which page is Active. For that active page check its page definition label which will be always unique. IF the page def label is like home_page_def (this is page def label you give for home page), then set the key value in the request property like isHome=true. By only doubt is after Book backingfile is triggered, the header has to be reloaded, because only then it can pick up the request attributes.
2. Create a brand new portlet like HomePageLinks portlet. Make its Title Property Not Visible, and other user interface properties like NoBorder, NoTheme etc. The associated JSP will have the 3 links you mentioned right aligned. You can use css styles to make it right etc. Now drop this portlet in the Header Shell area. You already have HeaderPortlet in the top, below that you will have this HomePageLinks portlet. Now associate a backing file for this Portlet to show, only if the Books current active page is Home page by comparing the def label etc as mentioned above.
In both scenarios, only concern is when we click on different Pages, the entire portal has to be rendered right from the Top Header. Only then the backing file will set the key, and the HomePageLinks portlet can show or hide accordingly.
Try firing an Event when the Home page is clicked. This listener for this Event can be the HomePageLinks Portlet. I guess Event mechanism should work irrespective of where the portlet is placed. In the event listner, see if you can show/hide this portlet.
The only challenge is Header section needs to reloaded everytime you click on a Tab.
Start putting some backing files and System.out.printlns to see if the Header section gets reloaded on click on any Tabs.
These are just my thoughts over the top of my head. Other forum users can have better alternatives or a different version of above approaches.
Thanks
Ravi Jegga

Goldengate between active and standby database server

Hi:
I want to make goldengate connection between active and standby database servers (bidirectional). is it possible?
if yes what steps is required rather than active-active connection.
PLease help!!!
Regards,
Abhishek

What do you mean by "standby" server? If you are referring to a Data Guard standby, how would bidirectional work? That's why one is primary, the other is standby.
If you are doing A-A, your "standby" is just another master in the N-way master architecture, so you already have a bi-di setup, right? Are you looking to replace Streams with GG?

How does iPad choose between wifi and 3G when both are 'on'?

Easy peasy question.
I have 02 and Wifi going on my iPad. I know I can use 02 out and about and I know I can use wifi at home etc.
But when I'm at home how do I make sure I'm using my wifi for data and not my cellular connection???
I've been turning my cellular to 'off' when at home, just in case, but I don't want to have the faff of turning it off and on, so it would be nice to know how the iPad chooses between wifi and 3G when both data access points are active.
Also I've had no wifi troubles at home at all. so far... The acid test will be setting it up at work as they have proxyies for everything, but obviously I don't have proxies at home. I'm not sure if the settings screen can cope with different proxies dependent upon different wifi networks... * grin *

In the status bar I have
a signal strength indicator then 'O2-UK' then the 'fan' No mention of 3G.
I'm guessing you're going to say that when 3G is showing then 3G is being used for data?

Please: How to sinchronize "contacts" between pc and ipad in windows 8?

Please: How to sinchronize "contacts" between pc and ipad in windows 8?
Thank you.
Ramón Mª

http://support.apple.com/kb/HT1296
Regards.

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

How to transfer books between ipad and pc

How to transfer books between ipad and the windows pc using iBooks.
REGARDS
Nadunbat.

make sure the pc has the most current version of i tunes for windows, then simply sync your pad. If it asks, upload purchases. They will be there when you need them.

How to sinck data between production and R12 instance

Hi,
I am working on Oracle Apps up-gradation project.
Now I have upgrade 11.5.7 to R12 (12.0.4) successfully. I started up-gradation task with 1 May of production data (backup) on new machine.
Client wants to live R12 from 1/August/2009.
Please suggest how to sinck data between production and R12 instance.
Thanks
Anup

Hi,
It is not possible to do what you propose (sync data from an 11.5.7 system to a 12.0.4 system). You will need to re-run the upgrade against the August 1 data, following your original upgrade procedures.
Regards,
John P.
http://only4left.jpiwowar.com

How the implementation differs between BW and BI , Is BI takes more time fo

Hi All,
I would like to know difference between implemenation and time lines for MM as mentioned below.
How the implementation differs between BW and BI , Is BI takes more time for implementing MM module than on BW?
Thanks in advanced. (Full points will be awarded)
With Regards,
PCR

Hi Timo,
Thanks for response!
But as i read from the following url: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/ViewObject.html, the setQueryTimeOut(int timeOutMills), the timeOut is mentioned in milliseconds. Please correct me if I am wrong.
and i have overriden the executeQuery() method in the View Object Impl class as shown below:
public void executeQuery() {
Map sessionScope = ADFContext.getCurrent().getSessionScope();
sessionScope.put("MyQuery", this);
try {
super.executeQuery();
} finally {
sessionScope.remove("MyQuery");
throw new JboException("Query Taking too long to respond");
and in the JAVA class i am calling the above method like this:
monitor.setQueryTimeOut(6);
monitor.executeQuery();
But the issue is:
1. The above exception message is getting carried forward to other pages as well. I mean somewhere in the session/ADFContext this message is being saved and error comes up/pops up when i click on other tabs of the page. How do i clear this?
2. The above exception message is coming for the first time but when i click the 'Submit' button second time, i am getting the results and also the message that 'Query is taking too long to respond'. This should not be the case, everytime it should show the same message as the timeout limit is less and the query should end without fetching the results.
Kindly let me know how to resolve the above issues, any pointers will be helpful.
Thanks in advance.
Edited by: user9223904 on Nov 3, 2012 4:42 AM

How does the integration between CRM and SD occur

How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanks

Hi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon

Definition of the best approach on how to do reporting between BPC and BW

Hi,
I need your opinion in the definition of the best approach on how to do reporting between BPC and BW.
For example if we want to do reporting using BW on Actuals Vs Budget how should we manage this since technically BPC Model and BW InfoCube is different?
BPC Models have the Budget and BW has the actuals, but the InfoObject that is used for Account is different. What is the best approach to do the reporting?
Thanks in advance,
JA

Hi Gersh
I already thought in that option, but the problem is the Yellow requests in the Infocube that are not used by VP.
In the past I used Report RSAPO_CLOSE_TRANS_REQUEST_ALL3 in the virtual function module to close the requests, but now I didn't want to use VP based on function module.
Is there any option to use data in Yellow requests in VP based on DTP?
Best regards,
JA

How to create agreement between supplier and distributor?

Hi..
How to create agreement between supplier and distributor?
thanks & Regards
Harish

Hi,
call TA EEDMIDESERVPROV02. Type in your service provider, an go to tab 'agreements'. Here you have the button 'Create Agreement'.
Best regards,
Alexander

How to change keepalive between active and secondary sup on 6500

Similar Messages

Maybe you are looking for