How to change key look up condition's operator ?

In the look up condition , how can I change the operator from default '=' to some other operator like '>' , '<','<=' or '>=' ?It is assumed that the data set is such that using operators like'<' or '>' will return only 1 record from the key look up.
Thanks.

hil,
u can not use look-up for operator for anything other than EQUALITY condition. You may have to go for a Join.
rgds
mahesh

Similar Messages

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How To Change Key Figure Name

Hi Gurus,
Is it possible to change the name of a Key Figure in Demand Planning? For example, in DP, i have a Key Figure name 'Sales Forecast'. The 'Sales Forecast' currently appears in every Planning book it was set.
Now, for alignment of understanding, I need to change the name from 'Sales Forecast' to 'Sales Demand' . Basically, i just need to change the text that appear in the Planning book and in the extracted BI reports.
Logic of Key Figure will remain the same. Is this possible? How do I go about this? I only know of how to add a Key Figure but never thought of how to change the Key Figure name/description.
Thanks in advance!
Nap

Hi,
You can change it in 2 ways.
1] Go to each Planning Book in Edit mode.
    In that go to a Tab called Key Figure Attributes.
    Select your Sales Forecast Key figure from the dropdown   against Key Figure.
   Then in Description click the radio button Free Text and give your new name which is Sales Demand.
This you have to do for all the PB in which this KF is used.
2] Go to RSA1 : Admin Workbench
Under Modeling section go to InfoObject.
Select your KF. Double Click on it. Or right click and go to Change mode.
Then change the Long and Short Description of the KF as desired.
Save & Activate the KF.
This will change your KF description for all the PB in which you have used the same PA.
Hope this helps.
Thanks,
Pushkar

How to change the look of the ESS Overview page

Hi,
We are implementing ESS/MSS and would like to change the look (font size and color, background color, ...) of only the Overview page (Area Group Page). From what I understand when a theme (css) is used it is applied to an entire Portal Desktop, not to a single page. And since the Overview page is a Web Dynpro application (part of the Floor Plan Manager), it doesn't seem possible to change the look besides using themes.
Of course we would like to keep the possibility to configure this page using IMG so rebuilding it from scratch is not really an option.
Any idea how this could be done?
Thanks,
Martin

Thanks Srikanth,
As far as I know it is not possible to change the font size or color of the overview page using IMG.
But I found a way of applying a theme to a single Web Dynpro application running inside the portal, like the Overview page. You need to specify the theme in the iView property editor using the Application parameter sap-cssurl. The feature is there and more or less documented, the only problem I am still not able to make it work, the portal theme is always used. It is also possible to change the theme of <i>all</i> the Web Dynpro applications running on the server (by changing WD a property in the J2EE Visual Admin, see this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=367022">post</a> for example) but this is not what I want to do.
Regards,
Martin

How to change key photo in album ios8

IIn photos on my iPhone 6 the key photo has changed from the first photo to a random photo. Does anyone know how to fix this
thx

select it and right-click and set as key photo. (doesn't apply to built-in smart albums).

How to change key (or pitch) for recording

Sorry if this has been answered before, but I couldn‘t find anything in a forum search.
I have a midi keyboard and a motu ultralite interface. Unfortunately I can‘t play keyboards very well, so when I am recording in a certain key with my guitar (e.g. B minor) I‘d like to be able to play the keyboard parts in another (C minor, much simpler...).
My keyboard (YAMAHA Clavinova) has a Transposer key but the interface (or garageband) doesn‘t react to it.
When I change pitch in a midi track in GB it works, but only after recording. When I record I am hearing the original key.
Does anybody know how I can work this out?
(If anybody understands what I am saying, lol. English is not my first language)
Thank you for any help
Thomas

I am one step further now.
With the free program Midipipe, I am able to transpose the keys from the midi keyboard. The only problem is, as GB listens to all midichannels at once, I get both the original note and the transposed note. That is a nice effect if you use the octave (12-String-piano, anyone?) but no use otherwise.
Midipipe has something called "hijacking a midi port" that should avoid this, but I can't get it to work.
Has anyone here used that program and the hijacking function?
Thank you for your efforts.....

How to change key of a song recorded in Logic Express 8.0?

I'm learning how to use Logic Express 8.0 and have recorded a song using software instruments only. I recorded the song in the key of C. Is there a way I can use Logic to make the song play in D?

There are several ways to change the pitch of song.
The simpler is to open the project global properties and change the key there.
The second could be to select track by track and changing the transpose parameter into the left top inspector.
The third is to open each track into the piano roll editor, select all notes and move them up or down.
cheers
rob

How to change key to press to continue in default captions (Quiz)

I want to change the key the user can press to continue to the next question in the quiz. The default is to click anywhere or press 'y' to continue. I want the user to press a different letter. Is this possible? I have searched forums and blogs and can't find an answer.

Hello and welcome,
You have very little control over the default question slides, you cannot see the click box that is there (for click anywhere), nor change the 'Y'. Have a look at this blog post where I describe the functionality of question slides:
http://blog.lilybiri.com/question-question-slides-in-captivate
You"ll find some tweak possibilities, but AFAIK it is not possible to change the character for step 2 in the submit process. You could try to skip the first step in the process (is explained), and add an extra shape button to pause later than the quiz pauze, with a shortcut key that corresponds with the letter you want. Seems very cumbersome, even if you can use shared actions because you are on CP7.
Lilybiri

How to change key

Hi,
I'm using GemXpressPro-R3 Java cards.
I would like to change the key used by Initialize Update and External Authenticate.
The documentation mentions that three keys are stored. MAC, ENC and KEK.
But all three keys are calculated from one mother key using diversification data ???
Which key do I have to change and how exactly can I achieve this?
Thanks Martin

You'll have to contact G+ for this.

How to change the look of emails on mobile device?

I am using elaqua mobile template. Its work good on both desktop and mobile screens, but I want to give this template a different look on mobile devices. I tried to use css media query, but Eloqua generated html codes has same class and id names.I mean, if I apply style on one class, it change the whole template.

Hi Hammad,
I just went through this process and though the end result is beautiful, I'm not sure it was worth the time it took to do.
Media Queries should work. Here is a portion of the code I used to display the email differently on different width screens. Note that the "important!;" bit is needed for everything to work properly. I used a mishmosh of classes and ID's -- I'm sure that could have been cleaner. If I recall correctly, I had to use h1[class=h1]to fix a bug with either Yahoo! or Outlook. There are some really good resources about responsive design for email at Campaign Monitor. Search for it and you will find their whitepaper.
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="content-type">
<meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1">
<title>Advances</title>
<style type="text/css">
/*Center email in Outlook*/
body {
    text-align:center;
    font-family: Arial, Helvetica, sans-serif;
/* Outlook table spacing fix */
.msoFix {
      mso-table-lspace:-1pt;
      mso-table-rspace:-1pt;
      border-collapse: collapse;
      display: inline;
/* generic stuff */
table {
    text-align:left;
td[class=section] {
    font-size: 12pt;;
    font-family: Arial, Helvetica, sans-serif;
/* Center email in Hotmail */
    .ExternalClass {
    width: 100%;
@media only screen and (max-device-width: 620px) {
td[id=lettercontent] {
    color: #000000 !important;
    padding: 30px 20px 25px 15px !important;
    width: 285px !important;
@media only screen and (max-device-width: 480px) {
p[id=preheader] {
    font-size: 16px !important;
    line-height: 16px !important;
    padding-bottom: 30px !important;
h1[class=h1] {
    font-size: 32px !important;
    line-height: 36px !important;
ul[class=ul] {
    font-size: 18px !important;
li[class=li] {
    font-size: 18px !important;
td[id=headercell] {
    background-image: url(http://promo.aaas.org/images/Advances/2013/Mobile/Enewsletter---Final--AC_02.jpg) !important;
    background-size: 312px 97px !important;
    background-position: center !important;
    background-repeat: no-repeat !important;
    width: 312px !important;
    height: 97px !important;
    border-top: 0px !important;
    border-bottom: 0px !important;
    border-left: 0px !important;
    border-right: 0px !important;
    padding: 0px 0px 0px 0px !important;
</style>
</head>

.Mac Web Gallery - How to change key photo and order or galleries?

How can I choose which photo is the key photo for each .Mac web gallery? Also, how can I re-arrange the order of the web galleries?

I would really love to see a solution for this too ! Unfortunately I think apple just didn't implement it in Aperture. My .Mac web gallery is about events in my life and it doesn't make any sense to have it sorted alphabetically...
Not being able to simply set a key photo is really annoying too.
The worst is that these two functions are available in iPhoto. All they had to do was copy and paste...
Apple are you listening ?

Need to make report "printable" How to change report look (template?)

We are using Theme 2 and it's the only one installed (that I can see anyway) and we aren't going to be installing anything else. I can't do anything that causes a major upheaval in the application because it has 104 pages and is in production. We are using 3.0 and 10g. We don't have BI (and can't afford it) so I'm trying to make some reports printable.
With theme 2, the column headers are shaded and text is blue - this shows up funny when printing so I want to modifiy a template that leaves all the lines in, changes the shading to grey, text to black and removes the "region" shading/decoration. I tried this by just modifying just the region template (and leaving the report alone) and it works other than the title is small and all I can do with it is center or bold, no matter what I try, it doesn't increase in size.
So I tried to modify an existing template but every line has a reference to theme 2
i.e. class = t2header and I don't know what to put there instead of the t2 that will make it stop using that theme and yet still show the lines, etc, that I want in the report.
Obviously I don't have a clue what I'm doing, and anything I find to help - I've been playing with Firebug and can figure out where to make changes, I just don't know what I'm supposed to change things to.

Just one more question ;-)
if I put <style> th.t2header { color:red; }</style> in the Region Definition Header on a page the text in ALL regions on that page (not just the region in which I put this style) turn red. How can I make it only turn the region it's in red, not all of them?
I would prefer to put it in the Template but I don't know how... this is my code but if I try to reference th.t2header it just pushes everything to one side, or does nothing, so I guess I'm not putting it in the right place?
<table cellpadding="0" border="0" cellspacing="0" summary="" id="#REGION_ID#" class="htmldbRegion">
<td class="t2RegionHeader" style="color:black;" valign="bottom">#TITLE#</td>
<tr>
<td class="t2RegionBody" valign="top" colspan="2">#BODY#</td>
</tr>
</table>

How to change key on runtime form in application server

How it is possible reconfigure key on froms in application server ????
List Values on Client = key "F9"
List values on Application = key "CTRL + L"
and so on.....
can j have the same on client version like apllication ???
Thank You !!

Mike,
the fmrweb.res file in the forms90 directory controls the behavior of Forms function keys. There is a file called fmrpcweb.res in the same directory that you can use to bring back client/server key mapping to Forms on teh Web.
1. rename fmrweb.res to something different
2. Make a copy of fmrpcweb.re and name it fmrweb.res
Frank

How to change the look of your screen

how do I change the theme of my phone ie colors

The iPhone does not support "themes". You can change the lock screen and home screen wallpaper.

How to change the look of iT10 if you really can't stand it

It worked for me and comes with an uninstall feature. iTunes 109:
http://erambert.me/

All i get when I get to this site is a page with an image... What is the exact procedure to go to the colored icons? I truly hate the grey... What was Steve thinking????

How to change key look up condition's operator ?

Similar Messages

Maybe you are looking for