How to change language bar that windows supports using google IME

Brief description about Google IME : Google Transliteration IME is an input method editor which allows users to enter text in one of the supported languages using a roman keyboard. Users can type a word the way it sounds using Latin characters and Google Transliteration IME will convert the word to its native script. Note that this is not the same as translation -- it is the sound of the words that is converted from one alphabet to the other, not their meaning. Converted content will always be in Unicode.
Problem Statement: I would like to buid an AIR Application to support some kind of data entry for different languages like English, Hindi, Arabic etc.. without going and selecting the language selection on the language bar present in the windows desktop.
I want to provide a combobox to select the language -- once the language is selected correspondingly the language selection bar should change to the language specified ( Assume that I have installed Google IME for that particular language - with a short cut keys to change the language selection)
when the mouse pointer is inside the app the keyboard should function like the language selected - once the mouse pointer goes out of the scope it should go to the defalut language ie English ( for eg)
In simple words when some selection on a combo box happens can I push programatically as if the user is pressed Alt+Shift+0 or Alt+Shift+1 ( some short cut keys)
Thanks in advance for sharing your thoughts and solution for the same.
Regards
Penugonda

Apple does not make what you are asking straightforward for a reason: the user usually sets the system language to the one they prefer anyway.
If you think you have a good reason for setting the language in the application itself, I would suggest using the pathForResource:ofType:inDirectory:forLocalization: method of the main bundle to get the applicable strings file and then deserialize it into a dictionary as if it were a plist (strings files actually are).

Similar Messages

How to change a seq that has been used by a wrong page ?

friends;
Created a tabular form page but pointed to a wrong seq name, is there a remedy to this without recreating a new page with correct seq name ?
Thanks in advance.
Wan

Create a new sequence starting higher than your current value (+ cache + a bit for safety if you're busy/paranoid) and then re-point anything using the "wrong" sequence.
You can spend hours of fun trying to "tidy up" already used/allocated numbers but it is risky and IMHO completely pointless. What does it matter - they're just managed unique numbers after all.

How to change language in photoshop CC 2014 with rksskogo into English?

how to change language in photoshop CC 2014 with rksskogo into English?

go to your installed photoshop directory select locales folder "nl_NL" folder "support files" "tw10428.dat" rename to "tw10428.dat.old" press yes, and restart the tool again

How to change language?

I accidently selected "English" as application language at the first startup of Adobe Reader. Now I do not know how to change it to German, Edit -> Preferences -> International -> Application Language -> "Choose at Application startup" does NOT work. Do I have to uninstall Adobe Reader and reinstall it to change language?!?
Sorry for my broken English.
Kind regards - Oliver
OS: Windows Vista
Adobe Reader: 8.1.2

>
Claudio González, "How to change language?" #2, 26 Mar 2008 5:31 am If you go to Preferences > International (Display in older versions of Reader), you are offered limited language options. These are between English and the language you chose when downolading (older versions), and the present language and selecting language at startup (newer versions), which will probably offer the same two lternatives.
As I have written, selecting one of these Options does
b not work!
Wich means no matter what I choose here it has
b no effect
(even after restarting adobe reader or my notebook)!
Other Ideas?

How to change language in speak selection

Hello!
Once i bought my fourth gen ipod touch, default voice in "voice over" and "Speak selection" was British Eglish.
Some day i had to restore my ipod,and i did, after that default language was US English with female voice!
I found out how to change language in "Voice Over",even found Russian(no necesserity in using it, but its one of my native languages). Still "Speak sellection" was US English.
When i turn Voice over on, it speaks selection with right language, but it's very hard to operate every time to just hear pronaunciaton of one word(that could be spoken with submenu of "copy,paste,cut,define,speak")
So i'm wondering,why does changing language of "VoiceOver" not affect speak sellection in normal mode? and how to make it speak different languages?
Thank You!

first state:
"VoiceOver" language:British English (man voice)(i selected it by myself)
Speak selection ("VoiceOver"assist is ON) : British English.
State 2:
VoiceOver language:British English
Speak selection ("VoiceOver" assist is OFF) : US English (female voice)
BEFORE restoring "Speak seletion" language was British English by default.
and i want to know how to make it back.

I just upgraded my Photoshop CC to CC 2104 but eventhough my previous PS language is english Creative Cloud installed Turkish PS and there is no language choice other than Turkish in preferences menu. Pls let me know how to change language to English fr

I just upgraded my Photoshop CC to PS CC 2104 but eventhough my previous PS language is english Creative Cloud installed Turkish PS and there is no language choice other than Turkish in preferences menu. Pls let me know how to change language to English from Turkish.

Hi BulKa59,
Thats strange. Could you share a screenshot of the CC desktop app preferences panel?
May i also know the operating system on which you are working?
Try to sign out from CC desktop app and then sign in back and check if you get the option to change the language.
Also, what is your operating system language?
Regards
~ Arpit

When I load itunes it defaults to the store and then I get a Blue Screen. Does anyone know how to change itunes so that it will default to My Music rather than store. I need to be able to do this before I load itunes.

When I load itunes it defaults to the store and then I get a Blue Screen. Does anyone know how to change itunes so that it will default to My Music rather than store. I need to be able to do this before I load itunes.

I solved the problem with the assistance of apple support knowledgebase. Refer to TS3441.

How to change language setting in NI DAQ mx software ?

Hello ,
We just purchased the NI DAQ mx , which is done by my colleage ..
so the software came in german even when I install ,it showed no any language selection option......
So pls hepl me put how to change language setting in the software.
Thanx
Bhavin

hello bhavin,
DAQmx uses the operating system language settings.
try to switch the language settings on your windows system to english, then DAQmx should also be english.
regards,
robert h
NI germany

How to Change language after installation?

Hello,
Kindly I need to know how to change language of adobe photoshop extended cs6 v.13.0 from English to English support Arabic?
Your prompt reply will be so highly appreciated...
Thank you
Rehab

You can run the Photoshop CS6 Installer again, and choose English (Arabic) as the language instead of English (North America)
Then in Photoshop Preferences > Interface, select English Arabic as your "UI language". Restart Photoshop.
If you use the Creative Cloud desktop application manager, click on the gear symbol,and select Preferences. This will install the English Arabic versions of all trial apps.
Gene

How can change language of application dynamic?

In the dialog I have combo box in which I can select desire language for application. When I select value I save this value in the config file. But language change ONLY when I exit and again enter to the application. How can change language of application dynamic (without exit from application) ?

alexpass wrote:
In the dialog I have combo box in which I can select desire language for application. When I select value I save this value in the config file. But language change ONLY when I exit and again enter to the application. How can change language of application dynamic (without exit from application) ?I guess your application sets the locale at "startup", based on the contents of the config file, using a call to java.util .Locale.setDefault(Locale). Did you try to call this method in response to the selection in the combobox?
This won't refresh all widgets already created however. You probably have to re-create them all.
There may be case-by-case way to refresh them, for example Locale-dependent layout may be taken into account dynamically. Try and tell us.

How to change language in Logic Studio?

My MacBook is Mac OS X 10.5.6, the system language is Traditional Chinese,
I want to fill English in my Logic Studio, even though I choose the English when filling software,
Logic Studio still run Simplified Chinese,
How to change language for Logic Studio,
May I have any master help me, Please.
Thank you.

Try this.
Quit Logic
Open System Preferences
Click International
Click Language tab
Drag English to top of list
Quit Sys Pref
Open Logic
JG

How to change language in Premiere?

Good afternoon!
I established CC in Russian.
But me more habitual to work at English.
How to change language in Premiere?
Dmitriy Pavlov

Change the language in the CC app and reinstall the programs.
Mylenium

How to change language of the server monitor ?

hi all,
How to change language of the server monitor ? i got it in japanese and would like to turn it into English.
Thx for your help,

We use japanese strings only when your server locale has "jp": FindNoCase("Japan", GetLocale()) NEQ 0. So you may not be able to individually change server monitor's flash client, but there are two ways to change it back to english on server level
1) Check your server locale and change it to anything but japanese.
2) Rename smresource_en.xml to smresource_jp.xml in CFIDE\administrator\monitor (take a back up).
Thanks,
Chandan Kumar

How to change language then i can't get in in computer?

I get problem with language. I used lithuanian language and i left computer , and after 1 hour I started to use, but I had to write my password. But because of lithuanian language I can't use numbers to do it.How to change language with keybord for Mac Pro 2013.

If you're unable to log in because the login screen language doesn't match your keyboard, press the key combination command-space or command-option-space to cycle through the available languages.
In some cases, it may be necessary to reset your computer’s PRAM.

HT5312 I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

You won't be able to change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to correct your rescue email address for potential future use

How to change language bar that windows supports using google IME

Similar Messages

Maybe you are looking for