How to change latency type to fast?
How to change latency type to fast?
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
5 days, 03:08:00
Downstream:
16,403 Kbps
Upstream:
948 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.1 dB / 4.7 dB
Line attenuation (Down/Up):
30.5 dB / 16.2 dB
Output power (Down/Up):
20.9 dBm / 12.2 dBm
FEC Events (Down/Up):
313987846 / 3701
CRC Events (Down/Up):
2155 / 18271
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
49173 / 14016
Error Seconds (Local/Remote):
0 / 17361
Similar Messages
-
How to change data type of attribute in caf
hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
Where is "save as" or how to change file type in Preview in Lion?
Where is "save as" or how to change file type in Preview in Lion? I used to use Preview to change quickly change a lot of PNGs to either JPEGs or PDFs but with the introduction of versions auto save etc there no "save as" in the File menu. Any suggestions how to get this functionality back or how to get around it within OS X (no Photoshop etc)?
Just wasted 15 minutes looking for that. What's wrong with Save As?
-
How to change light type?
Does anyone know how to change light type?
What happens is that I have a button that I would want to create a Point light, but it just create a spot light.
Does anyone know how to change it to create a point light?
My code is:
//Add a Point Light to active Comp
addLightCtrl.onClick = function(){
var pointLight = proj.layers.addLight("Light", [960, 540]);See the LightLayer object's lightType attribute. Page 100 of the AE CS6 scripting guide.
pointLight = activeItem.layers.addLight("Light", [960, 540]);
pointLight.lightType = LightType.POINT; -
How to change nat type 3 to nat type 2 for Plastation 4?
how to change nat type 3 to nat type 2 for adaptation 4? i am havng a complicated time with this im'm just trying to play online and been at it fotr 3 days i have tried about everuyhing n portforwarding.com i have a Cisco Linksys E1000
Hi ceasar14. I actually found some steps (from a source) that worked for me. I'm not sure if it will work for you. Here are the steps:
1. Get the MAC address of your PS3. To find your MAC address simply go to
Settings > System Settings > System Information
2. Assign a static IP address on your PS3.
3. Access your router's user interface to open a few ports.
4. Under Applications and Gaming > Port Range Forwarding, open the following ports:
TCP: 80, 443, 5223
UDP: 3478, 3479, 3658
5. Once this is done, powercycle your PS3 and the router.
6. Run a connection test and check if it is now on NAT2.
Good luck. -
HOW TO CHANGE ACCOUNT TYPE FROM IMAP TO POP
HOW TO CHANGE ACCOUNT TYPE IN YOUR EMAIL FROM IMAP TO POP
You can't. You need to create a new account in Mail.
Note, when setting up a new account (after clicking the '+' in the Accounts proeference), enter an invalid email address or option click the Continue button to be given the choice of account type (POP or IMAP). -
BT Infinity - Changing Latency type
Hello!
I have read a few articles that say that you cant change your latency type from Interleaved to Fast Path with BT Infinity because the modem is in a little white box and not part of the HH.
This is only the case for some people though. I still connect with the telephone wire and not the WAN port. I have always had a brilliant connection (noise wise etc.) and have always hit the theoretic max of my broadband on ADSL2 and now VDSL.
Would I be able to request my latency type be changed to Fast Path (as I assume it isn't that, although you can't tell with modern HH's) as I do not have this seperate modem box?
Thanks,
CraigThat's right, you can't. DLM handles the transition automatically.
If you found this post helpful, please click on the star on the left
If not, I'll try again -
Changing latency type to interleaved
How could I get that done?
Thanks for assistanceADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 17:13:09
Downstream:
15,892 Kbps
Upstream:
992 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.4 dB / 5.2 dB
Line attenuation (Down/Up):
30.5 dB / 16.3 dB
Output power (Down/Up):
21.0 dBm / 12.1 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
1690 / 3885
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
15105 / 3884
Error Seconds (Local/Remote):
0 / 3573 -
How to change material type and industrial sector of the exsisting material
Hi,
There is an issue where user wants to change material type and industrial sector of the exsisting material .Is it posible to do so??
IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector can be created.
Points will be definitely rewarded.
Thanks
RohitHi Rohit,
You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
Remember the new material type should have same attributes same as old material type.
OLD Material New Material
1) Standard Price 1) Standard Price
2) Manufacture part 2) Manufacture part
profile actvated profile actvated
3) Quantity & Value 3) Quantity & Value
Updation in all areas Updation in all areas
4) should have same GL 4) Should have same GL acs
acs
It is not possible to change Industry sector once created.
If you want to delete the Material, you can flag it in MM06 trxn code.
Reg,
Ashok
Dont forget to Assign points if useful. -
How to change set type attribute of a product
Hi ;
I created additional fields for products by using "COMM_ATTRSET". It created a table and functions but I dont know how to change this additional attributes.I cant use these attribute set functions because i dont know fragment_id yet. I think there must be a function encapsulates them.
Is there any BAPI to change set type attributes?
PS: In forums , I found an FM "COM_PRODUCT_MAINTAIN_MULT_API" but I think it hasnt been used anymore in CRM7.0
ThanksThanks for your reply ;
but FM 'COM_PRODUCT_UI_MAINTAIN' doesnt have any generic import parameters to send my data to it in form of newly created attribute set type table "ZPRODUCT".
I want to set some fields of ZPRODUCT and i need to send them in this structure, this table has column FRG_ID , if you set an additional parameter for the first time , it generates new GUID..I think 'COM_PRODUCT_UI_MAINTAIN' generates this GUID but i dont know how to use it.
Can you give an example about using this FM? -
Error value = 73, How to change the type of password?
I want to use the famous wiki integrated in leopard, so I had to configure open directory and DNS.
Well my problem come from that I can't configure open Directory, just after creating a new admin, I have no possiblity to change the type of password, there is just the type shadow, and I know that we had to choose open directory's type.
Obviously, I'm authenticated in the workgroup manager
Which services I had to turn on to use open directory's type?
Or which mac I have to hit.
THXHi
So I had to configure open directory and DNS
What did you do or not do exactly?
My problem come from that I can't configure open Directory
You won't be able to configure Open Directory to allow different password types unless you either bind your Server to an existing KDC or make your Server the KDC. For the Server to be a KDC (Kerberos Distribution Center) it has to be an Open Directory Master. Successful promotion to an Open Directory Master Role absolutely depends on a correctly configured and running DNS Service - either on the server itself or on another server on the same network.
There are plenty of posts in these forums outlining how to configure your Server in terms of DNS as well as how to promote to Open Directory Master. Apple themselves make available Admin Manuals that should assist:
http://images.apple.com/server/macosx/docs/OpenDirectory_Adminv10.5.pdf
http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.5.pdf
Failing this these forums (as already mentioned) as well as:
http://www.afp548.com
Hope this helps, Tony -
How to change data type of input parameter
Hi
In my procedure i declared the data type of "Value Date" Input parameter as Date where as in CR it is showing data type as "Date Time". Can any one please specify how to change to Date.
While prompting for input parameter in description it is showing message as
Please enter Date time in format"yyy-mm-dd hh:mm:ss" . To change the content selected "format field" option. But is there any way to change input parameter data type.
Please suggest how to change.
Thanks SruthiHi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
How to change your type of ipod in itunes
How can you change your type of ipod in itunes. We purchased a new Ipod touch and the computer/itunes will not reconize it.
Try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Make sure you have iTunes version 10.5 -
How to change content-type in receiver mail adapter
Hi,
I have receiver mail adapter for sending XML file as attachment in the mail. My partner expects to receive mail with content-type: text/xml, but XI sends Content-Type: application/xml. Please advise how I can change content-type to text/xml.
Thank you
Levhi,
try MessageTransformBean
Transform.ContentType
http://help.sap.com/saphelp_nw04/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm
also shown in my blog:
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
How to change file type associations in SAP ERP 6.0?
Hello,
I'd like to figure out how to change the application associated with a given file type in SAP. I want to open a .DOC file, but I am using OpenOffice instead of MS Word. I have .DOC file type already associated with OpenOffice in Windows XP, but SAP doesn't seem to recognize that association. I am using SAP ERP 6.0. Any ideas?
MikeHi,
MS Word is mandatory. You will not be able to work using Open Office in SAP.
Regards,
Rajesh Kumar
Maybe you are looking for
-
Timeout error when trying to create repository
Hello, I'm instaling ovm 3.2.3 and when I try to crete the storage repository from ovm manager I get a timeout error and it stops the creation. I've tried several times, I've reinstalled ovm and manager, but the error is always the same. I've look in
-
Photoshop CC transform boundaries are not moving with the object...HELP
All of a sudden when rotating an object the white boundary boxes are not staying with the object which is causing me tons of problems!! How do I fix this?
-
All my applications keep quitting unexpectedly.
It started with firefox and safari. now it's almost anything i'm using. i know my computer is sort of old but is there anything i can do to keep this from happening all the time?
-
How do I disable my pop-up blocker on a Mac Pro?
My son is taking a summer school course and he needs to disable the pop-up blocker. Anyone know how to do this?
-
How to create multiple spool requests at once?
We are setting up alarms in CCMS for when the spool is about to get full. I want to create several thousand spools automatically to try the alarm settings out and make sure that it works. This doesn't seem possible to do in SPAD, as only one spool is