How to change layout of report S_ALR_87012083?

Hi everybody,
How to change layout of report S_ALR_87012083 except change output control at selection screen ?
For example,I need a list that there have vendor no. at every line of open item,and I don't need Total liabilities for every vendor.
Thanks a lot for any help.

Hi yu liang,
You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful...

Similar Messages

Reg: how to change layout in report writer

HI all,
how to change layout in report painter?
regards
JK Rao

Hi everybody,
I have a report painter using transaction ke30 and I want to change the header layout.
Now it looks like that
|_________|_________|
But i want to add another header row above this row, so it will look like:
|_________________________|
|___________|_____________|
Does anyone know the answer?
Thanks a lot for your response
Edited by: Vo Duy Pho on May 24, 2010 10:29 AM
Edited by: Vo Duy Pho on May 24, 2010 10:37 AM

How can change standard BW- reports

Hi ,
i nee small chnges to BW standard reports ..
plz tell me , how can change standard BW- reports...
i assign points ..
regards
PSR

PSR,
You can make changes to them directly. But it is a best practice not to disturb them, but save as a new report and then make necessary changes. So you can save as them and make necessary changes.

How to change layout of new calculated item values?

Hi,
Is there a way on how to change colours or add a percentage symbol on the values of a calculated items?
I do not want to change the source measures in the criteria area I used to get the calculated items results.
Any idea?
Regards
Giuliano

I solved this by using an other approach.
Created a report and filtered the first resolts by certain value. Added a label.
Used combine with similar request and filtered again.
Created so many combines for the number of results I need to filters
In result columns renamed the label with a description which is a common denominator for all the labels
In pivot table, moved the main label to Rows and appled the sum
the reults is below
https://docs.google.com/file/d/0B0nRf4E3yBfpWS1WVjJjbWZyTG8/edit?usp=sharing
Regards
G

How to change layout for list display in background

Hi All,
I want to change layout for the list display of tcode fbl1n when i execute in background. is there anyway to select our own layout when i execute in background. When i execute in foreground we can change the layout by selecting change layout button, but how it possible when in backgroung, is there any way please let me know.
Thanks in advance.
Regards,
Vishal

Hi,
Create a list variant by executing the program and changing the layout and saving..
Then use the "Layout" parameter in the selection screen and give the variant you created earlier...
Then while executing in background the list variant will be pickedup accordingly (given in the selection screen)..
Hope this helps...
THanks,
Naren
Message was edited by: Narendran Muthukumaran

How to change job scheduler report....

How to change mail delivery and mail notification to another mail address for job report scheduled?
thanks

In order to turn this off you will have to go to eprint settings within eprint center, it should be just below the printer. From here you must set it to Allowed Senders Only, and then enter each email you want on the list. From here there is actually a checkbox for each address to turn notifications on or off.
Unfortunately this only works on allowed senders lists, if it is set to everyone you will get the generic response thanking you for using HP eprint. Another advantage however is that it gives you detailed information on why a job has failed when it is set to Allowed Senders.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Report Painter:How to change an existing report parameter to a SELECT optio

Hi ,
We have an already existign report, taht exists only in QA, How could we chnage the report such that the existing paramenter period would show up as SELECT option instead of a parameter.
I have no experience with report painter.
Thanks,
Vinotha M

I do not have any idea about Report painter and So dont know how I could do this.
Please help with this.
Also this report now does not exist in the development server.

How to change layout

Hello All,
I am working on customizing standard apps reports. It is in landscape and i need to change to portrait. Any suggestions on how to do it.
I am also trying to have different font sizes on the report and it doesnt seem to be accepting any font changes. Any ideas how to overcome this issue.
Thanks in advance.
Anant

For the page layout, have you tried going to the object navigator, going to the property inspector for your Main section, and changing the height to 11 and the width to 8.5, or just changing the "Orientation" to 'Portrait'? I think that should work, unless you've already tried it and it doesn't, if so, I'm not sure.
I'm not sure about it not accepting chages to font size, I've never had any issues with that.

How to change sql server reports parameter direction in report builder 3.0

Hi All,
I have created few reports using Report Builder 3.0 with the data source as SharePoint list. i have created a web part page and added the ".rdl"
file, everything is working as expected. Later, i got a requirement to add a parameter to the report , i did that and when i ran the report in SharePoint page, the parameters shows right side and the parameter ribbon shows the dropdown control on top and "Apply
button" at the bottom. When i presented this to my manager, he says the parameter ribbon looks bad and suggested to put both the controls together and also instead of displaying at right side vertical, display it horizontal.
I have below queries
How can i change the direction of parameter ribbon from vertical to horizontal
How can i bring the controls together (e.g. dropdown list control and button)
How can i add buttons on the report in report builder 3.0
How to get/reflect the data in report without refreshing the page.
Can someone please guide me, how to achieve the above functionalities..
MercuryMan

Unfortunately, where the parameters are located and the button distance away from the parameters are not something you can customize. Here are the options available for customization:
http://msdn.microsoft.com/en-us/library/bb326214.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to change layout in List of Sales Orders (VA05)

Hello,
Does anybody knows how I can save layout changes or create new layout in transaction VA05 (List of Sales Orders)?
Thanks for advance

Hi,
Goto VA05, enter values in selection screen press enter.
In menu click on settings>layouts>Current select the fields and save. Give layout name and description and press enter.
You can choose your own layout goto settings>layouts>Choose click on layout from list of layouts.
If you want to default your layout for VA05. settings>layouts>Administration. click on field default setting for your layout. Default you will get your own layout for VA05 transaction.
Regards,
Chandra

ALV OO: how to change layout more than once using custom pushbuttons?

Hello,
I'm developing a report using ALV Class CL_GUI_ALV_GRID.
It's nearly complete. but I need to add some little feature.
I create pushbuttons on GUI Status in order to show/hide totals and to group/ungroup fields according.
I have already created and I added them into PAI of corresponding dynpro, as follows.
GROUP/UNGROUP FIELDS:
DATA: g_editable_alv1        TYPE REF TO cl_gui_alv_grid.
DATA: tb_fieldcat_1          TYPE lvc_t_fcat.
DATA: tb_sort_1              TYPE lvc_t_sort.
FIELD-SYMBOLS: <fs_fieldcat> TYPE lvc_s_fcat.
CALL METHOD g_editable_alv1->set_sort_criteria
EXPORTING
    it_sort                   = tb_sort_1
EXCEPTIONS
    no_fieldcatalog_available = 1
    OTHERS                    = 2.
CALL METHOD g_editable_alv1->refresh_table_display
EXPORTING
    i_soft_refresh = 'X'
EXCEPTIONS
    finished       = 1
    OTHERS         = 2.
When I wanto to sort and group using fields CID and PSPID_VDATU, table TB_SORT_1 is filled as follows:
SPOS FIELDNAME                      UP DOWN GROUP SUBTOT COMP EXPA SELTEXT
01 |CID                           |X |    |     |X     |    |X   |
02 |PSPID_VDATU                   |X |    |     |X     |    |X   |
SHOW/HIDE TOTALS:
I have to show/hide totals for all fields with domain name ARBEIT. In this sample I copy code to be run when I want to show totals:
LOOP AT tb_fieldcat_1 ASSIGNING <fs_fieldcat>
                          WHERE domname = 'ARBEIT'.
<fs_fieldcat>-do_sum    = 'X'.
ENDLOOP.
CALL METHOD g_editable_alv1->set_frontend_fieldcatalog
EXPORTING
    it_fieldcatalog = tb_fieldcat_1.
CALL METHOD g_editable_alv1->refresh_table_display
EXPORTING
    i_soft_refresh = 'X'
EXCEPTIONS
    finished       = 1
    OTHERS         = 2.
OK, both features (and their opposite ones) works *only once*.
I mean: first time ALV is displayed according standard layout. Then I click on one of my new pusbutton and it works (ALV layouts is changed). If I click again one of my pushbutton, nothng happens.
Edit: I tried also to use CALL METHOD g_editable_alv1->refresh_table_display. (without any parameter), but nothing changed.
What should I modify in order to be able to use my pushbuttons as many times as I want?
Thank you and best regards
Guido

Your approach is ok. I think you are missing MODIFY statement when setting new fieldcatalog. Please follow my code, it works fine.
DATA: r_cust TYPE REF TO cl_gui_custom_container,
      r_alv TYPE REF TO cl_gui_alv_grid.
DATA: it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA: it_sflight TYPE TABLE OF sflight.
DATA: it_sort              TYPE lvc_t_sort WITH HEADER LINE.
"event handler class
CLASS lcl_handler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
          handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
                         IMPORTING e_object e_interactive,
          handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
                              IMPORTING e_ucomm sender.
ENDCLASS.                    "lcl DEFINITION
CLASS lcl_handler IMPLEMENTATION.
METHOD handle_toolbar.
    DATA: ls_toolbar TYPE stb_button.
    MOVE:
       0 TO ls_toolbar-butn_type,
       'FC_BTN' TO ls_toolbar-function,
       'Show/hide totals' TO ls_toolbar-text.
    APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD .                    "handle_toolbar
METHOD handle_user_command.
    DATA it_fcat TYPE lvc_t_fcat.
    DATA wa_fcat TYPE lvc_s_fcat.
    IF e_ucomm = 'FC_BTN'.
      sender->get_frontend_fieldcatalog( IMPORTING et_fieldcatalog = it_fcat ).
      LOOP AT it_fcat INTO wa_fcat WHERE fieldname = 'PRICE' .
        IF wa_fcat-do_sum = 'X'.
          wa_fcat-do_sum = space.
        ELSE.
          wa_fcat-do_sum = 'X'.
        ENDIF.
        MODIFY it_fcat FROM wa_fcat.
      ENDLOOP.
      sender->set_frontend_fieldcatalog( it_fcat ).
      CALL METHOD sender->refresh_table_display
        EXPORTING
          i_soft_refresh = 'X'.
    ENDIF.
ENDMETHOD.                    "handle_user_command
ENDCLASS.                    "lcl IMPLEMENTATION
INITIALIZATION.
SELECT * FROM sflight INTO TABLE it_sflight UP TO 20 ROWS.
START-OF-SELECTION.
CALL SCREEN 100.
MODULE pbo OUTPUT.
IF r_cust IS NOT BOUND.
    CREATE OBJECT r_cust
      EXPORTING
        container_name              = 'CUSTOM_CONTAINER'      .
    CREATE OBJECT r_alv
      EXPORTING
        i_parent          = r_cust.
    it_sort-fieldname = 'CONNID'.
    it_sort-up = 'X'.
    APPEND it_sort.
    CALL METHOD r_alv->set_table_for_first_display
      EXPORTING
        i_structure_name = 'SFLIGHT'
      CHANGING
        it_outtab        = it_sflight.
    SET HANDLER: lcl_handler=>handle_user_command FOR r_alv,
                 lcl_handler=>handle_toolbar FOR r_alv.
    CALL METHOD r_alv->set_toolbar_interactive.
ENDIF.
ENDMODULE.                    "pbo OUTPUT
Regards
Marcin

How to change layout set in KM room part...

Hi,
My company is currently using EP6 SP15 and is in the process of trialing the use of Collaboration room.
One of the feedback from our users is that they do not like the layout of the KM document room part. What they would like to use is the "Tree list Preview Explorer" layout. Can someone point me to any documentation on how this could be done?
Thanks,
Thomas Siu

Hi Thomas,
It is easy to do this for a single room to experiment
before changing the iView settings for the template which would affect new rooms. You can go into the Details for the root folder of your room part and call up the "Presentation Settings". Then choose the "ConsumerTreeListPreview" as the Layout set.
In my rooms I typically add a set of extra links in the Room Links iView (perhaps restricted to the admins) that provide an Admin Explorer view and a WebDAV link. These look something like this:
https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.navigation/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX?rndLayoutSet=AdminExplorer
javascript:document.write('<div id=mydiv><a href=https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/ folder=https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>Click here if page fails to redirect.<\/a><\/div>');mydiv.addBehavior('\x23default\x23httpFolder');mydiv.navigateFrame('https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX','_self');
Obviously, you need to change "myportal" to your portal name/domain and "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX" to your room store GUID. These links make maintaining room content easier.
I also typically make the top folder a bit prettier by using a taxonomy-like view with a grid of big folder icons with be links.
Regards,
Darin

How to change layout in portal

It's a very hard question to me.but may be easy to you.
there are very limited layout in portal.
but i need more userful layout ,may be 4 columns in layout
How should i do if i want change the layout?

Hi,
see http://help.sap.com/saphelp_nw04/helpdata/en/d5/1b083e7623445ae10000000a11405a/frameset.htm and (somewhat older) https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9242a890-0201-0010-32a9-8516639c5afa
Hope it helps
Detlev

How to change order of report painter columns

I have a report which shows the columns in one order when in design mode in GRR2 but when the report runs, the columns display in a different order. When in design mode, you can see the actual output order by clicking the form overview button and selecting the columns tab.
I am trying to figure out how to set the column order, short of deleting all the columns and recreating them.
Does anyone know if there is an easy way to do this?
Thanks all!
Bob

Doug,
using MDC with SAP is ok. Try the following:
- Use SE14->Edit->Storage Parameter->For new creation and specify the ORGANIZIE BY DIMENSION clause.
- Go to the change-mode for the table in SE11. Switch to the 'Fields'-Tab and select the complete second line. Then click on 'Cut'.
- Now select the first line in the same way and click on 'Paste'. By doing so you moved the field at position 2 to position 1.
- Save the changes, click on 'Check' and, if that succeeds, click on 'Activate'.
Hope that helps.
Regards,
Johannes

How to Change Database of Report before Exporting?

I am having difficulties changing the database that the report should run against.
We are using Oracle. In the past when scheduling a report through CE, I would manipuate the Desktop.ReportLogons object. For Oracle I simple changed the CustomServerName, CustomUserName, and CustomPassword properties. Everything worked fine when the report was scheduled and ran.
Now I am doing an on-demand report without an interactive viewer. I am doing everything in code using RasAppFactory and the ReportClientDocument.
I am looking at the DatabaseController of ReportClientDocument. I thought I could just use the LogonEx method passing in the server, user, password, and an empty string for the database since for Oracle connections you only specify server and not database. However, it is still trying to connect to the defined database.
Can someone point me to an Oracle specific example of how to properly change database info when report runs?
Do I need to be using other methods like one of the SetTableLocation methods?
Thanks in advance for any help.

Hello, Stephen;
You are correct, with Oracle you do not need the Database property.
The person logged on to Business Objects Enterprise through the RAS .NET application would need rights to make the change in database connections. Can the usr with the same logon make the change directly in Enterprise?
The ReportClientDocument separates the Server Name and Database from the User ID and Password with the PropertyBag. The convenience methods such as LogonEx will only change the User ID and Password. To change all four properties you need the full RAS logon code.
The full logon for RAS would use code as shown below.
Elaine
==========================================
Imports System
Imports Microsoft.Win32
Imports CrystalDecisions.Enterprise
Imports CrystalDecisions.Enterprise.Desktop
Imports CrystalDecisions.CrystalReports.TemplateEngine
Imports CrystalDecisions.ReportAppServer.ClientDoc
Imports CrystalDecisions.ReportAppServer.Controllers
Imports CrystalDecisions.ReportAppServer.ReportDefModel
Imports CrystalDecisions.ReportAppServer.DataDefModel
Imports CrystalDecisions.ReportAppServer.CommonObjectModel
Imports CrystalDecisions.ReportAppServer.ObjectFactory
Partial Class Logon
    Inherits System.Web.UI.Page
    Dim mySampleReportName As String = "SimpleSetLogonInfo.rpt"
    Dim crServerName As String = "myOracle"
    Dim crDatabaseName As String = ""
    Dim databaseUserName As String = "tester"
    Dim databasePassword As String = "tester"
    Dim crDatabaseController As DatabaseController
    Dim crDatabase As Database
    Dim crTableOld, crTableNew As Table
    Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
        ConfigureCrystalReports()
    End Sub
    Private Sub ConfigureCrystalReports()
        DatabaseLogon_managedRAS()
    End Sub
    Private Sub DatabaseLogon_managedRAS()
        Dim mySessionMgr As New SessionMgr()
        Dim myEnterpriseSession As EnterpriseSession
        Dim myReportAppFactory As ReportAppFactory
        Dim myInfoStore As InfoStore
        Dim myInfoObjects As InfoObjects
        Dim myInfoObject As InfoObject
        Dim myReportClientDocument As ReportClientDocument
        Dim myEnterpriseService As EnterpriseService
        Dim myObject As Object
        myEnterpriseSession = mySessionMgr.Logon("administrator", "", "CMS_Server", "secEnterprise")
        myEnterpriseService = myEnterpriseSession.GetService("InfoStore")
        myInfoStore = New InfoStore(myEnterpriseService)
        myInfoObjects = myInfoStore.Query("Select SI_ID From CI_INFOOBJECTS Where SI_NAME='" + mySampleReportName + "' And SI_INSTANCE=0")
        myInfoObject = myInfoObjects(1)
        myObject = myEnterpriseSession.GetService("", "RASReportFactory").Interface
        myReportAppFactory = CType(myObject, ReportAppFactory)
        myReportClientDocument = myReportAppFactory.OpenDocument(myInfoObject.ID, 0)
        'Convenience methods not to change Database or Server name from what is in the report
        'myReportClientDocument.DatabaseController.logon("UID", "PWD")
        'myReportClientDocument.DatabaseController.LogonEx("myServerName", "myDatabase", "UID", "PWD")
        crDatabase = myReportClientDocument.DatabaseController.Database()
        crDatabaseController = myReportClientDocument.DatabaseController()
        ' Loop through all the tables in the main
        ' report and set their new table information.
        For Each crTableOld In crDatabase.Tables
            crTableNew = GetNewTable(crTableOld, crServerName, crDatabaseName, databaseUserName, databasePassword)
            crDatabaseController.SetTableLocation(crTableOld, crTableNew)
            crTableNew = Nothing
        Next
        crDatabase = Nothing
        crTableOld = Nothing
        myCrystalReportViewer.ReportSource = myReportClientDocument
    End Sub
    Private Function GetNewTable(ByVal crTableOld As Table, ByRef serverName As String, ByRef databaseName As String, ByRef userName As String, ByRef password As String) As Table
        ' Create crTableNew as a new table, then fill its properties.
        Dim crTableNew As New Table
        Dim crAttributes, crLogonInfo As PropertyBag
        ' Set some of the properties of the new table object.
        crTableNew.ConnectionInfo.UserName = userName
        crTableNew.ConnectionInfo.Password = password
        crTableNew.ConnectionInfo.Kind = crTableOld.ConnectionInfo.Kind()
        crTableNew.Name = crTableOld.Name
        crTableNew.Alias = crTableOld.Alias
        ' Make a copy of the connectionInfo.Attributes and apply them to the new table.
        crTableNew.ConnectionInfo.Attributes = crTableOld.ConnectionInfo.Attributes.Clone(True)
        crAttributes = crTableNew.ConnectionInfo.Attributes()
        ' Check to ensure the connection info Kind is correct then change the a
        ' appropriate properties in the PropertyBag.
        ' These will vary from report to report using ODBC, OLEDB or Native drivers
        ' To find out your properties
        ' open your report in the Crystal Reports Designer and go to Database,
        ' Set Location menu. Check the properties of your connection and note
        ' the name of the properties that will change.
'ODBC to Oracle "Data Source Name" and "Table Name" with "Owner"
'OLEDB to Oracle "Provider" "Data Source" and "Table Name" with "Owner"
        If crTableNew.ConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE Then
            crLogonInfo = CType(crAttributes("QE_LogonProperties"), PropertyBag)
            crLogonInfo("Data Source") = crServerName
            'MS SQL Server OLEDB
            'Leave out for Oracle
            'crLogonInfo("Initial Catalog") = crDatabaseName
        End If
        ' Adjust the qualified name, then return the new table object if the table name has changed
        crTableNew.QualifiedName = "Owner." & crTableNew.Name
        Return crTableNew
    End Function
End Class

How to change layout of report S_ALR_87012083?

Similar Messages

Maybe you are looking for