How to change legend name in Web-I line graph

Hi,
Please help me on this. My Web-I line graph displays the legend same with the universe measure name that I have used. Is there a way to rename the legend.
Thank you in advance.
Rose

Hi Rosemarie,
There is no functionality of editing the legend text of a graph in a Webintelligence report
Enhancement Request ADAPT00787806 has been created.
If you are more concerned about the Legend title and not the Measure name then you can store the measure values in Measure Variable and give the variable name you want your legend title should be.
Only take dimensions and newly created variable on the report where variable will act as measure.
I Hope this Helpsu2026
Thanksu2026
Pratik

Similar Messages

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change the name of a BADI Implementation?

Hello experts,
Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
Thanks in advance,
AK

Hi,
Please go to transaction SE19, enter your implementation name.
Then go to menu: Implementation -> Rename -> ...
Regards,
Ferry Lianto

How to change you name in iCloud

My dad regestard my iPad onto his name then I had to change my name on iCloud because when I send email on my iCloud email address it says Philip on it. I don't want people to laugh at me so I changed it my name now my dad got me an iPhone and he regestered it on his name and in my iCloud email it says Philip instead of sofia I want my iCloud email address to have my name on it not my dad's I can't remember how to change the name. Please tell me or I will never use my iCloud email address ever again.

I have the same problem, and I trued doing what you did and change my name but it still doesn't say my name(I'm a girl and the name is a guy's)

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

How to change datasource name based on the partition in configplan

Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?

If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar

How to change the name of column in ActionScript?

I possibly know how to change the name of the column in DataGrid using mxml but dont know how to change the name of column in DataGrid using ActionScript.
var newDataGrid:DataGrid=new DataGrid();
newDataGrid.dataProvider=arrayCollection():
It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
Please HELP!

Give your datacolumn and id. Then set the property for that column through the datacolumn id.
DataGridColumn id="nameDC"
Script:
nameDC.headerText = "Name";

HT204053 Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

Can anyone tell me how to change the names of the networks I have set up on Airport Express

Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

Hi mkl1961,
Happy Holidays! The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.
Resetting an AirPort base station FAQ - Apple Support
http://support.apple.com/en-us/HT3728
What default settings will my AirPort base station have after a hard or factory default reset?
AirPort base stations are set to request an IP address by DHCP.
AirPort base station passwords are "public."
AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
*A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port. You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
Airport Express Setup Guide
manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
I hope this information helps ....
- Judy

How to Change Computer Name

Two questions...the first is to find out how to change the name of a computer. When I pulled data of of my previous Mac, the name stuck onto the new one.
Secondly...an old email address keeps popping up in my keychain. Anyway to get in and delete that?
Thanks for any help.

I recently added another iPhone to the Mac inventory and up initializing, it asked if I wanted to make a certain email address my default. I've not used that address for quite a while. I've seen this address pop up a couple other places too, so I'm wanting to retire it for good.
Thanks for you help on the first question.

How to change of NAME and IP after RAC installation.

Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.

Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

How to change the name associated with iCloud email alias??

I had MobileMe on the iPhone with alias email addresses and I liked how it didn’t attach any “name” to an alias. For example, I had MainUserName, then for aliases I would have [email protected], [email protected], etc. When I sent an email from my iPhone using one of the aliases as the "from" no name would be associated with the alias email address. If it was the MainUserName then it would associate it, e.g. Main User <[email protected]> will show up on the "From" field when I sent an email. But with iCloud on the iPhone (and iPad), it’s Main User <[email protected]>, Main User <[email protected], etc., which I don’t want. If anything it should be Alias 1 <[email protected]> or Alias 2 <[email protected]>. Anyway, I don't want any name associated with the aliases, so when I send an email it will simply say [email protected] or just [email protected] with no name association.
It works differently if I access iCloud through a web browser. If I send an email via iCloud on the web, I can customize and have a different name with each alias, e.g., Tom <[email protected]> or Harry <[email protected]> And the customization carries over to the Mail app on my Mac. That would be ideal if the customization carried over to the iPhone and iPad, but I'd be happy if there was no name association with alias email addresses. Hopefully, there's a solution to the iPhone/iPad situation with iCloud as I don't want the name linked with the main iCloud email address linked with all the different email aliases I have.

Can I change the name associated with an ipod on my Mac?
Select the iPod in the iTunes source list, click on its name, and type a new name.
And can there be more than one iPod on one computer?
Yes.
(39352)

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

How to change legend name in Web-I line graph

Similar Messages

Maybe you are looking for