How to change local object to own dev class

in the table maintenance generator my object is stored under local object how to change loacal object to our own development class and how to change the function group in table maintenance generator

Hi Narendra,
In order to change the function group, you need to delete the table maintenance generator first.
Then you create a new table maintenance generator.
To change the package of your object :
1. for Function Group
   - tcode SE80
   - right click on the Function Group
   - choose : More Function - Object Directory Entry
2. for Table / Function Module
   - tcode se11 / se37 / se38
   - in the upper menu : choose : Goto -- Object Directory Entry
Hope this helps.
best regards

Similar Messages

How to change local object to transportable object?

I have a structure that was created locally but I want to move it to QAS, so I want to make it transportable object. How do I do this?
Thanks.
Mithun

Thanks Rich. When I tried to transport I got an error below:
Table ZXXX could not be activated
(E- Nametab for table ZXXX cannot be generated )
Any idea why this would happen?
Thanks.
Mithun

How to change local draft folder loaction in sharepoint server

Hi,
please help me that how to change local draft folder location for documnet libery in sharepoint server.
because by default when we check out document that documnet store in c:/documnet setting folder in our local drive.
i want to store in another location is this possible if yes then how to.
Please help me.
Thanks in advance.
Regards
Sanjeev Tiwari

While the steps below are fine for Word (and I gather that Excel, Powerpoint have similar steps), what
about Project 2007? We have Project 2007 SP3, and (a) it doesn't have an Office Button like the core Office 2007 products, and (b) the SharePoint Local Drafts folder isn't listed in the Save options. Please advise!
-Joe
Hi,
You can change the location of your local drafts folder where your files are placed while they are
checked out to you in Office system program: click “Microsoft Office Button”>select “Word Options”>select “Save”>in
Offline editing options for document management server files> in Server drafts location
box, type the location on your hard disk where you want to work with checked-out files, or click
Browse and find the location.
This article has detailed steps:
http://office.microsoft.com/en-us/powerpoint/HA102085831033.aspx
Xue-Mei Chang

How to create an object within the same class???

hi im just a newbie
i v been always creating an object from the main class..
but how to create an object inside the same class??
i got main and students class
the main got an array
Students[] stu = new Students[]
and i got
stu[i] = new Students(id,name);
i++;
but i wanna do these things inside the Students class..
i tried ..but i got errors.....
how to do this
.

javaexpert, :)
I really have no idea what you are trying to do since you say you've always been creating an object from the main class, yet you always want to create an object inside the same class.
I'll assume that you have an object in the main class that you are trying to access from the Students class.
If you are trying to access objects that are contained within the main class FROM the Students class, then know that there are two ways of doing so, one being static, and the other dynamic (look up definitions if unclear):
1.) make the objects in the main class both static and public and access the the objects using a convention similiar to: Main.object; It's important to note that Main is the name of your main class, and object is a static object. There are better ways of doing this by using gettter/setter methods, but I'll omit that tutorial.
2.) Create a new instance of the main class and access the objects using a similiar fashion: Main myInstance = new Main(); myInstance.myObject;
You should really use getter and setter methods but I'll omit the code. In terms of which approach is better, step one is by far.
I don't mean to be condecending, but you should really brush up on your programming skills before posting to this forum. This is a fundamenetal concept that you will encounter time and time again.

Change local object

Hi I have a process chain in already in Production. I made few changes in Dev for testing and saved as local object. Now, I need to transport those changes to prod. So, I need to change in BW package not in local object. I I don't know how to change it..I am deleting the changes and redoing it to see if the pop-up would come so that I can save not in local object...but it's not poping up anything..could anyone please help me.
thanks.

So if you follow the steps that I wrote, you will not actually be doing the transport...it will just collect all objects required to do a successful transport (variants, processes and InfoPackages etc). At the top will be the process chain name. You can select it and right click and choose Change Package. When you chnage the package and save, it will pop up for the request. Assign the same request to all other objects that may be $tmp. Then you can hand over this request number to your Basis team.
Hope this helps...

How to change local file Permissions as a default

I have a mavericks Imac with certian permissions on a folder. when users copy and paste the folder on a server for others to use, some users are not able to acess the files.I know how to change the permissions on the folder manually. But I want to know if there is a way to make my own default permissions to stick with the profile for making new folders?
I have looked into booting to an OS CD and choosing default permissions for files and folders, but I dont see how that will change anything, becuase I don't need to reset the permissions, i need to be able to give access to certian users automaticaly.
any ideas?

Sounds like you are not using ACLs. When you double click your share point in Server.app, how many entries do you have in the Permissions window? If you have only 3 then you are not using ACLs which explains why your permissions are not inheriting. POSIX permissions, the base three of owner, group, and everyone, do not inherit. You need to add at least one more permission entry to the table. This is called an ACE (access control entry). Together, you are building an ACL (access control list). Try not to use users. Always add groups if possible as it is easier to manage and never requires propagation of the permissions.
R-
Apple Consulting Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

How to change Data Object

Hi everyone,
I m trying to change from one D.O. to another using the "Global Change Data Object" at BAM Active Studio, but when I find the D.O. wich I want to use the radio button its greyed out. I really need to change the D.O. and I dont see how to do it.
Thanks in advance,
Mario Mesquita

It will only let you change dataobjects if all the fields are identical to the reports current dataobject.

How to make local Object Request as Transportable Request

Hi,
I have saved as local Object , Now i need to make has transportable request.
Can any body tell how to do?
Regds,
C.V.
Message was edited by:
P.C.V.

Hi Chakri,
Drag and drop that object into right screen of Transport connector tool and then click on Click on Truck button to create the Transport request.
With rgds,
Anil Kumar Sharma .P

How to Configure Local J2ee Egine with Dev server ECC.

Hi,
working with ESS/MSS enhancements. I just imported DC from NWDI and create the application in NWDS.
But unfortunately I don't have access to Dev J2ee Engine to deploy and check my applications. I installed developer work place in my local machine.
Now have to test the applications which are related with ECC (like updating DB and fetching detailed from DB). for that I need to configure local J2ee Engine with Dev ECC.
Could you explain step by step details how can I do this or send me docs to venky0905 at g
Regards
Venkat.
Edited by: Juan Reyes on Apr 14, 2009 9:16 AM
Edited by: Venkat D on Apr 15, 2009 1:47 AM

Hi,
When I am trying to create and set to Jco RFC Provider in visual admin,
For creating I am giving the parameters of Dev ECC gaveway host & Service details and Direct application parameters.
When setting to Jco RFC Provider I am just trying to Connect to VPN as I need to connect Dev ECC. once I connect to VPN My local J2ee is shutting down as well visual admin also disconnecting.
I am not understood what's the connection wit Local J2ee Engine and VPN connection. Is there any netwrok connections I need to perform Or what else I can do to resolve this issue?
Can you please any once suggest on this at earliest.
Regards
Venkat

2012R2 VDI how to change "local virtual desktop creation location" for collection

Hi,
I want to change "local virtual desktop creation location" for existing collection but this setting is grayed. This location is not exists anymore and I cannot add new VM's to collection.
If there is no way to do this if it possible to create new collection and move old VM's there?
Thanks!

Hi Sergey,
I assume that you mean virtual desktop storage location, which I don’t think that we can change this setting for an existing collection.
You can create a new collection, during the creation process, you will be able to select a different storage location for new VMs.
More information for you:
Single Image Management for Virtual Desktop Collections in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/10/29/single-image-management-for-virtual-desktop-collections-in-windows-server-2012.aspx
Geek of All Trades: VM-Hosted RemoteApps - New Best Practice for Virtual Desktops?
https://technet.microsoft.com/en-us/magazine/jj554307.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Problem while saving an object under a dev class

hi all,
Here is a problem while saving an object under a development class.... I created a Z program (ZSORDER) through SE38 and while i was saving that Z program under a development class called SALES it shows an error message like <b>" customer object program ZSORDER can't be assigned to the package SALES"</b>..... can any one can explain what is the problem....

hi,
you should have created your package starting with the letters "Y" or "Z".
you have created it with the letter "s". SALES.
's' is reserved to be used by SAP.
so create the package with the letters 'y' or 'z' like 'ysales' and you wont be getting that problem.
try it.
warm regards,
Hari Kiran

How to typecast an object, if the target class name is stored in a str var

Hi,
I have a method, in which i will receive an object as an attribute. I need to typecast it to another class, and that class name is stored in a string variable.
public void printContent(Object obj)
/* Here i have a variable strClassName - in which a class name is stored.
I need to create a variable for that class and type cast the object obj into that class. */
Please kindly help me to find out a way to do this.
Thanks in advance

Typecasting does one thing: it enables you to store an object in a reference variable of the target type (if it is of a type which is allowed to be in that variable). It doesn't alter the object in any way.
Therefore it simply isn't meaningful to talk about typecasting to a type name known only at run time. The whole point of typecasting is to tell the compiler to treat a reference as being of a specified type.
I don't know what you're trying to do but I think you should probably be looking at the reflection api, getting field an method information from the object's Class object.

How to change local to development class

Hi experts,
I have saved object in local, i would like save that object in development class.
can u please tell me how to do?
Thanks in advance.
Manisha.

Hi,
     Please find the below navigation:
     SE38 --> GOTO (Menu Option at top) --> (select) Object Directory Entry --> one dialog box will display --> Press on Change mode (pen symbol)
     Then you can cnagnge the development class.
     It will solve your problem.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 1:12 PM

How to change Anchor Object Options Status of Object Styles?

hi to all,
here i'm creating Object Style and applying some properties, when i create a Object Style, and the anchor Object options not become true status instead it being in false status how do i change status of anchor Object options of object styles
pls help me
here the i tried code,....
myAnchorFrame.contents =selItem;
     try{
     var rightObjStyle = app.activeDocument.objectStyles.add({name: "RightAlignment"});
     with(rightObjStyle.anchoredObjectSettings)
      spineRelative = false;
      anchoredPosition=AnchorPosition.anchored;
      anchorPoint = AnchorPoint.LEFT_CENTER_ANCHOR;
      horizontalAlignment = HorizontalAlignment.RIGHT_ALIGN;
      horizontalReferencePoint = AnchoredRelativeTo.COLUMN_EDGE;
      anchorXoffset = spaceVal;
      verticalReferencePoint = VerticallyRelativeTo.lineBaseline;
     }}catch(e){
       myCharacterStyle = app.activeDocument.objectStyles.item("RightAlignment");
       myCharacterStyle.anchoredObjectSettings.anchorXoffset= spaceVal;
      try{
     var leftObjStyle = app.activeDocument.objectStyles.add({name: "LeftAlignment"});
     with(leftObjStyle.anchoredObjectSettings)
      spineRelative = false;
      anchoredPosition=AnchorPosition.anchored;
      anchorPoint = AnchorPoint.RIGHT_CENTER_ANCHOR;
      horizontalAlignment = HorizontalAlignment.LEFT_ALIGN;
      horizontalReferencePoint = AnchoredRelativeTo.COLUMN_EDGE;
      anchorXoffset = spaceVal;
      verticalReferencePoint = VerticallyRelativeTo.lineBaseline;
     }}catch(e){
       myCharacterStyle = myDocument.objectStyles.item("LeftAlignment");
       myCharacterStyle.anchoredObjectSettings.anchorXoffset= spaceVal;
      try{
     var L_RObjStyle = app.activeDocument.objectStyles.add({name: "L/RAlignment"});
     with(L_RObjStyle .anchoredObjectSettings)
      spineRelative =true;
      anchoredPosition=AnchorPosition.anchored;
      anchorPoint = AnchorPoint.LEFT_CENTER_ANCHOR;
      horizontalAlignment = HorizontalAlignment.LEFT_ALIGN;
      horizontalReferencePoint = AnchoredRelativeTo.COLUMN_EDGE;
      anchorXoffset = spaceVal;
      verticalReferencePoint = VerticallyRelativeTo.lineBaseline;
     }}catch(e){
       myCharacterStyle = myDocument.objectStyles.item("L/RAlignment");
       myCharacterStyle.anchoredObjectSettings.anchorXoffset= spaceVal;
      if(align =="Left")
       myAnchorFrame.applyObjectStyle(app.documents[0].objectStyles.item("LeftAlignment"), true);
      else if (align =="Right")
       myAnchorFrame.applyObjectStyle(app.documents[0].objectStyles.item("RightAlignment"), true);
      else if(align =="Left/Right")
       myAnchorFrame.applyObjectStyle(app.documents[0].objectStyles.item("L/RAlignment"), true);

Is it the:
   enableAnchoredObjectOptions = true;
As shown here: http://forums.adobe.com/thread/454988?tstart=30

How to change locale of keyboard in linux using java.

In my application I have a JTextArea . In that field i have to call my language dependent keyboard. How to do this?. I tried with InputContext ipt = InputContext.getInstance();
ipt.selectInputMethod(new Locale("en", "US"))But it is working in windows, but not in linux.

If any one have experience in this, please respond...

How to change local object to own dev class

Similar Messages

Maybe you are looking for