How to change local object to transportable object?

I have a structure that was created locally but I want to move it to QAS, so I want to make it transportable object. How do I do this?
Thanks.
Mithun

Thanks Rich. When I tried to transport I got an error below:
Table ZXXX could not be activated                 
(E- Nametab for table ZXXX  cannot be generated )
Any idea why this would happen?
Thanks.
Mithun

Similar Messages

  • How to change original source system of objects at one time

    Hi, experts !
    I installed extra devlopment server using system copy of orignal
    delveopment system.
    We have planed that new objects applied to orginal server after developing
    finished on extra devlopement server.
    The problem is we can not modify or add old objects for specific
    package because orignal source system is different
    and I know this is SAP policy.
    Of course original source server can be changeed on t-code SE03 or
    function module TRINT_TADIR_MODIFY
    but it should be applied to every objects. This is big job to BC admin.
    Is there any solution to possible it at one time?
    Best Regards

    You can transport all relevant packages from the old to the new development box including a change of the original system using a special transport request of type "relocation of complete package". Check with your system administrators.
    Please close your similar post here:
    How to change original system SID to objects by batch?
    Thomas

  • How to change the title of an object in the build order window?

    In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
    I'm running the following:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro2,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.33 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 4 MB
      Memory: 2 GB
      Bus Speed: 667 MHz
      Boot ROM Version: MBP21.00A5.B08
      SMC Version (system): 1.14f5

    Custom names can't be applied to objects in the build list.
    They are labeled as either; text, shape, table, chart or the filename of an image

  • How to change local draft folder loaction in sharepoint server

    Hi,
    please help me that how to change local draft folder location for documnet libery in sharepoint server.
    because by default when we check out document that documnet store in c:/documnet setting folder in our local drive.
    i want to store in another location is this possible if yes then how to.
    Please help me.
    Thanks in advance.
    Regards
    Sanjeev Tiwari

    While the steps below are fine for Word (and I gather that Excel, Powerpoint have similar steps), what
    about Project 2007?  We have Project 2007 SP3, and (a) it doesn't have an Office Button like the core Office 2007 products, and (b) the SharePoint Local Drafts folder isn't listed in the Save options.  Please advise!
    -Joe
    Hi,
    You can change the location of your local drafts folder where your files are placed while they are
    checked out to you in Office system program: click “Microsoft Office Button”>select “Word Options”>select “Save”>in
    Offline editing options for document management server files> in Server drafts location
    box, type the location on your hard disk where you want to work with checked-out files, or click
    Browse and find the location.
    This article has detailed steps:
    http://office.microsoft.com/en-us/powerpoint/HA102085831033.aspx
    Xue-Mei Chang

  • How to change local object to own dev class

    in the table maintenance generator my object is stored under local object how to change loacal object to our own development class and how to change the function group in table maintenance generator

    Hi Narendra,
    In order to change the function group, you need to delete the table maintenance generator first.
    Then you create a new table maintenance generator.
    To change the package of your object :
    1. for Function Group
       - tcode SE80
       - right click on the Function Group
       - choose : More Function - Object Directory Entry
    2. for Table / Function Module
       - tcode se11 / se37 / se38
       - in the upper menu : choose : Goto -- Object Directory Entry
    Hope this helps.
    best regards

  • How to change local file Permissions as a default

    I have a mavericks Imac with certian permissions on a folder. when users copy and paste the folder on a server for others to use, some users are not able to acess the files.I know how to change the permissions on the folder manually. But I want to know if there is a way to make my own default permissions to stick with the profile for making new folders?
    I have looked into booting to an OS CD and choosing default permissions for files and folders, but I dont see how that will change anything, becuase I don't need to reset the permissions, i need to be able to give access to certian users automaticaly.
    any ideas?

    Sounds like you are not using ACLs.  When you double click your share point in Server.app, how many entries do you have in the Permissions window?  If you have only 3 then you are not using ACLs which explains why your permissions are not inheriting.  POSIX permissions, the base three of owner, group, and everyone, do not inherit.  You need to add at least one more permission entry to the table.  This is called an ACE (access control entry).  Together, you are building an ACL (access control list).  Try not to use users.  Always add groups if possible as it is easier to manage and never requires propagation of the permissions.
    R-
    Apple Consulting Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • How to change ship to party'  Transportation zone when create a order ?

    Hi,
       I want to change ship to party'  Transportation zone when create order with VA01 before save.
       what user ecit can be used? I modify the Transportation zone  in the table xvbpa in program MV45AFZZ, but it does work.
       Please help ~
      Thank you~

    Hi,
    Try to use Fm  BAPI_SALESORDER_CHANGE
    in table u can find
    PARTNERS          Communications Fields: SD Document Partner
    PARTNERCHANGES          Partner changes
    and use UPDATEFLAG when  you change

  • 2012R2 VDI how to change "local virtual desktop creation location" for collection

    Hi,
    I want to change "local virtual desktop creation location" for existing collection but this setting is grayed. This location is not exists anymore and I cannot add new VM's to collection.
    If there is no way to do this if it possible to create new collection and move old VM's there?
    Thanks!

    Hi Sergey,
    I assume that you mean virtual desktop storage location, which I don’t think that we can change this setting for an existing collection.
    You can create a new collection, during the creation process, you will be able to select a different storage location for new VMs.
    More information for you:
    Single Image Management for Virtual Desktop Collections in Windows Server 2012
    http://blogs.msdn.com/b/rds/archive/2012/10/29/single-image-management-for-virtual-desktop-collections-in-windows-server-2012.aspx
    Geek of All Trades: VM-Hosted RemoteApps - New Best Practice for Virtual Desktops?
    https://technet.microsoft.com/en-us/magazine/jj554307.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to Change behavior of standard text object&text ID (SE75)?

    Hello there!!
    I'm struggling with this:
    For standard text object C_SHES_ACH & ID 0001 (EHS: IHS Safety Measures) wichs is used as a description for safety measures (CBIH82/CBIH02..) need that when the user create or edit the text, already appears a "Fill in the blanks"  form.
    For example, in CBIH82, editing an accident log, I go to Safety measures Button, then create a safety meassure, and when i click for long text description something like this should appear:
    TEXT 1 (1st Title)
    user line
    user line
    user line
    user line
    (free amount of user lines)
    TEXT 2 (2nd Title)
    user line
    user line
    user line
    user line
    (free amount of user lines)
    Thanks a lot for your feedback!
    Rgds!!

    Hii,
    I am unable to understand exactly wat you want.
    But for free amount of lines : Keep that text under LOOP. Right click on template or window and create a loop and under that loop keep the text ,you can get many lines. or the given below point plzz follow.
    1,Use SO10 Tcode to write standard text in Smartform.
    2.For long text
    method1
    Create TEXT node- general attributes change text type to include text
    then you can input text name/text object/text id/language
    method2
    create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
    then use LOOP or TABLE node to display it
    For TEXT module(For foreign language)
    Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
    then enter smartform Create TEXT node- general attributes change text type to text module
    input the text module name which created by above
    3.
    1. take function module name of the smartform.
    2. goto se37 and type that fm name.
    3. goto attributes tab
    4. double click on either program or include .
    5. There u can find all the subroutines used inside smartform.
    6. search for "perform %move using %textkey-name".
    4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
    check the tables STXH & STXL.
    5.
    How to CAll Standard Text in Smart Forms
    In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available.

  • How to change properties dinamically to all objects that are in a JPanel

    Hi experts!
    I have this code:
    JPanel pnlDataTxt;
    pnlDataTxt.add(new JTextField());
    But I want to change the properties of that JTextField after it has been added to the JPanel.
    How can I do that??

    Hi experts!
    I have this code:
    JPanel pnlDataTxt;
    pnlDataTxt.add(new JTextField());
    But I want to change the properties of that JTextField
    after it has been added to the JPanel.
    How can I do that??You have to create a handle to an instance of an object like:
    JTextField testField = new JTextField();
    JPanel pnlDataTxt;
    pnlDataTxt.add(testField);Now you can change the properties of "testField".

  • How to change original system SID to objects by batch?

    Hi, experts
    I did system copy and so I want to chage orignal system SID to new system SID.
    I checked it is possible to modify in SE03 or using function module 'TRINT_TADIR_MODIFY'.
    But problem is objects are alot.
    How can I update them easily?
    Thanks

    Did you perform the post processing in SE06?
    Changing the SID can be done in table TADIR, but that won't be supported....
    Kind regards,
    Mark

  • How to change original language of ABAP objects?

    HI,
    I have created a BADI and an interface in R/3 release 6. I created the BADI in original language German, but by mistake I created the interface in Original langauge English.
    Is there a way to change the original language of the interface to German? I tried editing and activating the interface in German logon, but it did not help as teh Original langauge of the interface remained as English.
    Is there any SAP report which would help me to change the original language of ABAP objects?
    Regards,
    Srini.

    Hi,
    Here's the way out:
    Step 0. Delete the object
    Step 1. Delete the object directory entry(If it says entry doesnt exist, recreate it - ie. the object dir. entry)
    Step 2. Login to the language of choice - In ur case 'DE'
    Step 3. Recreate the new object
    Voila!!! Original Language changed
    Cheers,
    Gaurav

  • How to change the content of a object array completely???

    before, i had this
    Object[][] icon = {
    {new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/Beefcake Eric.JPG"),
             new ImageIcon("cartoon/Cartman.JPG"),
             new ImageIcon("cartoon/Charlie Brown 1.JPG"),
             new ImageIcon("cartoon/Charlie Brown 2.JPG"),
             new ImageIcon("cartoon/Charly Brown 3.JPG"),
             new ImageIcon("cartoon/Chef.JPG"),
             new ImageIcon("cartoon/Wendy.JPG")},
              {new ImageIcon("cartoon/Woodstock.JPG"),
             new ImageIcon("cartoon/XmasPlay.JPG"),
             new ImageIcon("cartoon/Amedee.JPG"),
             new ImageIcon("cartoon/Billie.JPG"),
             new ImageIcon("cartoon/Charlot.JPG"),
             new ImageIcon("cartoon/Fanny.JPG"),
             new ImageIcon("cartoon/Father Bollie.JPG"),
             new ImageIcon("cartoon/Wendy van Wanten.JPG")},
              {new ImageIcon("cartoon/Councelor.JPG"),
             new ImageIcon("cartoon/Franklin.JPG"),
             new ImageIcon("cartoon/Ike.JPG"),
             new ImageIcon("cartoon/Jesus.JPG"),
             new ImageIcon("cartoon/Kenny.JPG"),
             new ImageIcon("cartoon/King Snoopy.JPG"),
             new ImageIcon("cartoon/Kitty Kitty.JPG"),
             new ImageIcon("cartoon/Kyle.JPG")},
              {new ImageIcon("cartoon/Kyle's Mom.JPG"),
             new ImageIcon("cartoon/Lucy.JPG"),
             new ImageIcon("cartoon/Marcie.JPG"),
             new ImageIcon("cartoon/Mr. Garrison.JPG"),
             new ImageIcon("cartoon/Mr. Hanky.JPG"),
             new ImageIcon("cartoon/Mr. Hat.JPG"),
             new ImageIcon("cartoon/Mrs. Cartman.JPG"),
             new ImageIcon("cartoon/Off. Barbrady.JPG")},
              {new ImageIcon("cartoon/Peppermint Patty.JPG"),
             new ImageIcon("cartoon/Philip Glass.JPG"),
             new ImageIcon("cartoon/Pissed Kyle.JPG"),
             new ImageIcon("cartoon/Sally.JPG"),
             new ImageIcon("cartoon/Scaredy Cow.JPG"),
             new ImageIcon("cartoon/Schroeder.JPG"),
             new ImageIcon("cartoon/Snoopy 1.JPG"),
             new ImageIcon("cartoon/Snoopy 2.JPG")},
              {new ImageIcon("cartoon/Snoopy 3.JPG"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg")},
              {new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg")},
              {new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg")},           };
    now i want to change to this:
    icon = {
    {new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG"),
             new ImageIcon("cartoon/Wendy.JPG")},
              {new ImageIcon("cartoon/Woodstock.JPG"),
             new ImageIcon("cartoon/XmasPlay.JPG"),
             new ImageIcon("cartoon/Amedee.JPG"),
             new ImageIcon("cartoon/Billie.JPG"),
             new ImageIcon("cartoon/Charlot.JPG"),
             new ImageIcon("cartoon/Fanny.JPG"),
             new ImageIcon("cartoon/Father Bollie.JPG"),
             new ImageIcon("cartoon/Wendy van Wanten.JPG")},
              {new ImageIcon("cartoon/Councelor.JPG"),
             new ImageIcon("cartoon/Franklin.JPG"),
             new ImageIcon("cartoon/Ike.JPG"),
             new ImageIcon("cartoon/Jesus.JPG"),
             new ImageIcon("cartoon/Kenny.JPG"),
             new ImageIcon("cartoon/King Snoopy.JPG"),
             new ImageIcon("cartoon/Kitty Kitty.JPG"),
             new ImageIcon("cartoon/Kyle.JPG")},
              {new ImageIcon("cartoon/Kyle's Mom.JPG"),
             new ImageIcon("cartoon/Lucy.JPG"),
             new ImageIcon("cartoon/Marcie.JPG"),
             new ImageIcon("cartoon/Mr. Garrison.JPG"),
             new ImageIcon("cartoon/Mr. Hanky.JPG"),
             new ImageIcon("cartoon/Mr. Hat.JPG"),
             new ImageIcon("cartoon/Mrs. Cartman.JPG"),
             new ImageIcon("cartoon/Off. Barbrady.JPG")},
              {new ImageIcon("cartoon/Peppermint Patty.JPG"),
             new ImageIcon("cartoon/Philip Glass.JPG"),
             new ImageIcon("cartoon/Pissed Kyle.JPG"),
             new ImageIcon("cartoon/Sally.JPG"),
             new ImageIcon("cartoon/Scaredy Cow.JPG"),
             new ImageIcon("cartoon/Schroeder.JPG"),
             new ImageIcon("cartoon/Snoopy 1.JPG"),
             new ImageIcon("cartoon/Snoopy 2.JPG")},
              {new ImageIcon("cartoon/Snoopy 3.JPG"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg")},
              {new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg")},
              {new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg"),
             new ImageIcon("cartoon/#@!&_  Cartman.jpg")},           };*/

    Sounds... like... fun...
    So... what's your question?

  • How to return or rollback the transport object in PRD?

    Hi Experts,
    I transported a revised program to PRD. But I decided to return it to my previous code. How would I do that in PRD?
    I'm not a real basis. PLease guide me.
    Points for the helpful ideas. Thanks!

    Hi,
    You have to move a separate transport with the version of the program you wanted from development to production. You cant change it in prod itself.
    Thanks
    Aneesh.

  • How to change the size of every object in a flash file

    i created a flash website but the problem is the size is to large to fit on screen i have imbeded buttons, Movies clips, masks, and about 7 different scenes in this 13 mb movie what do i do to make the physicle size of the objects on screen so i can view it on my sceen?

    the easiest thing to do would be to load your swf into a main swf and resize the target movieclip (as2) or loader (as3) after loading is complete.

Maybe you are looking for