How to change MAC address on VPN Adapter - Deterministic Network Enhancer

Is it possible to change the MAC address 00-05-9A-3C-78-00 on the Cisco VPN Client / Cisco Systems VPN Adapter - Deterministic Enhancer Miniport. (Version 4.6.02.0011)
Thanks

I've tried using mac address changeing softeware on it before and it always changed it back when I enable my VPN.
HTH
Patrick

Similar Messages

How to change mac address on mac

i'm sry i'm not sure if this is the right section or not but yeah.... nyways does anyone know how to change mac address on a macbook?

If you have not updated your OS you can use the following command.
sudo ifconfig enX ether xx:xx:xx:xx:xx:xx
You will need to replace the X with your network number and the xx:xx:xx:xx:xx:xx with the mac you want to have.
Then run
sudo ifconfig enX down
sudo ifconfig enX up
This change will last till your next reboot.
cheers
NOTE: This is not working in 10.5

How to change mac address on time capsule

Hi there,
How to change mac address on time capsule?

There are routers that allow you to create/clone a mac address to whatever you like. Since many companies use the mac address to 'register' a unit connected to it's system, you usually just have to let them know you've changed your router and they will reset your system to accept connections from the new device.

How to change mac address on wrt54g router

How to change mac address on wrt54g router?

are u sure u wanna change the MAC of the WRT54G ? it's not possible....you can however clone the MAC address of your PC onto the router...depending on your ISP.

How to check MAC address from host from local network

Hello,
I must save information about my network enviroment, at some periods of time (IP, Host Name, MAC Address, and later some information from SNMP). I have IP addresses of all devices. Could any one have an idea how to check MAC address. In java.net.* I didn't find anythink about my problem.
Please give my an answer, if you konow any solution.
Marcin Kowalski

hi !
I've typed ipconfig on my PC which has windows2000 pro. as the OS!!
but i couldn't get th line you've mentioned "Physical Address" !!
what could be wrong .. ?!! hope you could help!!
thanks!!
C:\>ipconfig
Windows 2000 IP Configuration
Ethernet adapter
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.130.128.210
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.130.128.1

I would like to change Mac Address of Ethernet only without card change

I would like to change Mac Address of Ethernet only without ethernet card change.
Please let me know how to change Mac Address.
It's need to keep internet security.

I question why you want/need to also, but it can be easily done...
http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/
http://whatismyipaddress.com/change-mac

Can't change MAC address of my wireless card on Windows XP

Dear Forum Members,
I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
* Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
* Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
* Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
* Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
* Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
"As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
Then I addressed Lenovo with the problem, their answer:
"Dear ******,
Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
Once again, thank you for contacting Lenovo.
Sincerely,
Lenovo Websales/CustServe"
So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
Thanks in advance,
str4ngS

Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

Changing MAC Address

Recently i have been trying to change my Router's MAC Address. I have a WRT54g v.3. I have done it before where i had unplugged the internet cable going from the wall to the modem. I saw the change on the 192.168.1.1 status page. And i noticed with a proxy and the new changed MAC address i was able to get into gaming servers i hadn't been able to before because my IP was banned.
Now when i try to change my MAC address, it doesn't seem to change on the router stautus page like it did once before. I'm sure that it's possible to concel my identity of my old IP and get a new IP (through a proxy), many people do this for security reasons so i'm hoping linksys products can offer some kind of security by doing this.
btw, sorry about the name, if it's possible can it be changed to Joe. Thanks guys.

Your MAC is "stuck" to that router, you need to spoof it. Google it.

How to change JNDI dynamically in DB adapter and FTP adapter

Hi every one,
Please any one explain "How to change JNDI dynamically in DB adapter and FTP adapter" with screen shots
Thanks in advance

YES, very much possible. Only with CRUD operation on a table is possible.
Please refer the below URL, where you can see the multiple check box selected under "Perform an operation on a table" under Operation Type.
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#BDCGADFJ
*7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
Going forward, please raise this as a separate thread. So that people will get benefited.
Thanks,
Vijay

How to block mac address in 2800 router

sir
how to block mac addresses in cisco 2800 router

Hi,
To block mac addresses you can simply create Mac based ACLs which ranges between
700 to 799
Example:
access-list 700 deny xxxx.xxxx.xxxx.xxxx
access-list 700 permit yyyy.yyyy.yyyy.yyyy
now you can apply it on interface:
int f0/0
access-group 700 in
exit
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

How to see mac address in IPS 4240 ???

Hi all,
How to see mac-address of inline-vlan-pair ? and how to see mac-address of management interface in IPS ?
Regards,
Kiran

Hello Kiran,
The inline-vlan-pair itself is tied to a particular interface. So you're really asking for the MAC address of the interface associated with the inline-vlan-pair.
The MAC address of sensing ports will be added to a "show interfaces" via CSCse84414. You can currently view the MAC address of sensing interfaces by doing an "ifconfig -a" from the service account.
Thank you,
Blayne Dreier
Cisco TAC IDS Team
**Please check out our Podcast**
TAC Security Show: http://www.cisco.com/go/tacsecuritypodcast

How to get MAC address from IP address in LAN

Hi all,
How to get MAC address from IP address in LAN (windows or any OS), I would have all IP addresses of my LAN, so I would like to know all MAC address.
Code examples are highly appreciated.
Thanks & Regards,
abel...

abel wrote:
Yeah that is only working for local system, but how to get remote system's MAC ..?
Thanks for quick reply ...
Edited by: abel on Jan 28, 2009 12:10 AMIt is my understanding that only one person ever found the holy grail which you seek. But sadly [_he's dead_|http://forums.sun.com/profile.jspa?userID=649366]
As a curious aside how did you manage to get the list of IPs?

How to find mac address of a client computer in specified time and port in WIFI WCS Control system

how to find mac address of a client computer in specified time and port in WIFI WCS Control system

WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes.

How to change "home" address on IPhone 5s map app for navigation purposes

How to change "home" address on IPhone 5s map app for navigation purposes

OK I tried that. I have two apps that need updating and it STILL shows the old Apple ID from the App store. I even tried logging off iTunes and powering off the phone, then powering it back on and logging in. Still shows the OLD Apple ID in the app store. The correct one is showing in the Settings/iTunes. Any other thoughts?

How to change billing address to another country?

how to change billing address to another country?

Before you change the country, you might want to note the following:
1) If you have store credit, you must use the credit before you can change countries.
2) You will need to download all purchased content. In addition, rented items must be past their 30-day expiration. For more information on rentals, please see:
http://support.apple.com/kb/HT1657
3) You must provide a payment method, such as a credit or debit card associated with a valid billing address in the new country. An iTunes Store Gift Card issued in the new country is also an acceptable payment method.
4) After you change countries, you will no longer receive application update notifications in iTunes for the apps you purchased in your original country. However, you'll still receive update notifications on your iOS device for any applications installed on it.
5) If you have an iTunes Match subscription, you can't change countries until the subscription has expired.
6) If you have purchased a Season Pass, you cannot change the country associated with your account until that season is done airing and the last episode of the season has been added to the iTunes Store.
7) If you have been using iTunes in the Cloud to download past purchases from your Purchased page, these purchases will no longer appear when you change the country.
That said, you can change the country for your account using a computer using these steps:
1) Sign in to the iTunes Store.
2) From the Store menu, select View My Apple ID.
3) Sign in with your Apple ID.
4) Click Change Country or Region.
5) Choose your new country from the menu, and click Change.
To change the country for your account using an iOS device, check out this article:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311

How to change MAC address on VPN Adapter - Deterministic Network Enhancer

Similar Messages

Maybe you are looking for