How to change mail check rate?

Is there a way on the iPad 3 to change the rate at which the e-mail program polls the (in this case my own) server to check mail?  I'd like to set it to check mail less often to avoid collisions with other mail clients on the POP3 server.

Try settings / mail, contacts, calendar and then the option about half way down 'fetch new mail'.
Hope this is what you mean.

Similar Messages

  • How to change the update rate of an Analog output in a loop

    I have to generate a ramp at a decreasing frequency. I use a shift register in a "for" loop to decrease the rate of the analog output. Unfortunately, the loop or the analog output initialisation take a too long time delay..
    How can I solve this problem?
    Any help is greatly appreciated
    Thank you

    Hello;
    I'm attaching an example VI that shows how to change the output rate on the fly.
    Hope this helps.
    Filipe
    Applications Engineer
    National Instruments
    Attachments:
    aochangeonthefly.zip ‏47 KB

  • How to change Availability check (MTVFP) in sales order

    Hi,
    is it possible to change the Availability check on an material in an sales order?
    Some material have the value KP (no check) of Availability check in table MARC.
    If we use this material in sales orders somtimes we want change the Availability check
    from KP to 01 (Daily requirements). Is this possible or have i first change the material
    before i use it in sales order.
    Thanks.
    regards, dieter

    Its pre-define in material master, how particular will be treated in respective sales organization / Plant /
    So its always in material master , you cant change availability check n sales order.
    Once order is created, after that checkin group changed in material master, will be effective for future orders only. not effective in existing / old orders.
    Regards,
    Reazuddin MD

  • How to change the pricing rate of Sales Order after delivery is created?

    Is it possible to update(change) the pricing rate which belong to a specific condition type, of the "Sales Orders"  after corresponding delivery is created ?
    number of the Sales Order to be changed is huge. How can I handle this situation ?
    immediate replies would be rewarded

    Repricing is only possible if your pricing record has a valid from date that is equal to or before the pricing date on the order. Otherwise, your pricing rate change will be applicable only from the begin date of that record.
    Assuming that it is allowed by config, you can go to VA02, go to conditions, and then there is small button at the bottom, that says 'Update'. By pressing that, your system will automatically reprice the sales order, provided, as I said, all pre-conditions are met. Once you know that you can do this, then you can adopt any of the technical solutions that Rich had suggested above to do the mass changes.

  • How to change mail default account

    I have several mail accounts gmail, comcast.net and icloud, how do change the defaunt out going account.

    In Mail on the Mac…
    Open Mail > Preferences, Composing tab.
    Change the 'Send new messages from:' popup
    iOS has a similar default setting inside Settings.app > Mail.

  • How to change a check box default from checked to unchecked?

    Hi All,
    I have a form, want to change a check box default from checked to unchecked.
    from the layout, doulb click into property of this check box, did not see default setting for the box, where to change a check box default from checked to unchecked?
    Thanks.

    hello friend,
    ->go to the property palette of ur check box
    ->under the functional set the property "check box mapping of other values"=unchecked
    so...when u run the form then checkbox will unchecked.
    but..at design time u can't see the effect of unchecked..
    Regards
    Chandan

  • How to change the check box with the push button in itrator table rows

    Hi all,
    I want to change the check box of the itrator table rows with push button/ some thing better as to give
    the table view more good look and user friendly.
    Does any one has tried any other option in table view in place of check box
    Thanks
    Bhagat

    There are various objects which you can create via iterators. Please see the application SBSPEXT_TABLE for more details.
    DATA: lo_text      TYPE REF TO cl_htmlb_textview,
            lo_ddlb      TYPE REF TO cl_htmlb_dropdownlistbox,
            lo_input     TYPE REF TO cl_htmlb_inputfield,
            lo_button    TYPE REF TO cl_htmlb_button,
            lo_chk_bx    TYPE REF TO cl_htmlb_checkbox.
      row_ref = p_row_data_ref.
      CASE p_column_key.
        WHEN 'EFF_DATE'. " Input field
          CREATE OBJECT lo_input.
          lo_input->id       = p_cell_id.
          lo_input->type     = 'DATE'.
          lo_input->showhelp = 'TRUE'.
          lo_input->width    = '60'.
          lo_input->invalid  = 'true'.
          p_class            = `ao`.
          lo_input->value     = get_column_value( p_column_key ).
          p_replacement_bee = lo_input.
        WHEN   'NEW_LOC'. " Drop down list box
          CREATE OBJECT lo_ddlb.
          GET REFERENCE OF gt_persa INTO lo_ddlb->table.
          lo_ddlb->id                =  p_cell_id.
          lo_ddlb->nameofkeycolumn   = 'NAME'.
          lo_ddlb->nameofvaluecolumn = 'VALUE'.
          lo_ddlb->selection         = get_column_value( p_column_key ).
          lo_ddlb->selection  = 'DUMMY'.
          p_replacement_bee          = lo_ddlb.
        WHEN 'MON' . " Check box
          CREATE OBJECT lo_chk_bx.
          lo_chk_bx->id = p_cell_id.
          lo_chk_bx->checked =  get_column_value( p_column_key ).
          p_replacement_bee  = lo_chk_bx.
        WHEN 'NEW_MGR_SRCH'. " Button
          CREATE OBJECT lo_button.
          lo_button->id            = p_cell_id.
          lo_button->text          = 'Search Mgr'.
          lo_button->onclientclick = 'script'.
          p_replacement_bee = lo_button.
        WHEN OTHERS. " Text
          CREATE OBJECT lo_text.
          lo_text->id       = p_cell_id.
          lo_text->wrapping = 'FALSE'.
          lo_text->text     = get_column_value( p_column_key ).
          lo_text->design   =  'STANDARD'.
          lo_text->textcolor = 'POSITIVE'.
          p_replacement_bee = lo_text.
      ENDCASE.
    Thanks
    A

  • How to change UOM conversion rate

    I have an item assigned to a UOM. I define the conversion rate like 1case = 500 pieces. Having done that, I transact a few numbers. Now after some time, the business requires that the conversion be changed as 1case = 450 pieces. Now, as I understand, changing the conversion rate from 500 to 450 directly on the existing conversion definition will definitely corrupt the data. Now if I have to define a new conversion, then the system would not let me choose the UOM 'case' on the same item.
    Creating a new UOM also would not help as changing the UOM of the item is also not receommended.
    What can be the approach in this case? Any pointers or help is greatly appreciated.
    Thanks
    Khyum Mohammed
    Edited by: 817125 on Dec 29, 2010 9:14 AM

    Hi,
    If the Business no longer uses the 500 pcs conversion, one could Inactivate the conversion and define a new one.
    If Business wants to have a choice of using 500 or 450 pcs, then a new Case UOM needs to be defined.
    I hope this helps.
    Regards
    Adarsh Krishna

  • How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

    sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
    set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
    why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
    how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

    That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
    You can specify display settings with an answer file however:
    <Display>
    <HorizontalResolution>640</HorizontalResolution>
    <VerticalResolution>480</VerticalResolution>
    <ColorDepth>16</ColorDepth>
    <RefreshRate>60</RefreshRate>
    </Display>
    http://technet.microsoft.com/en-us/library/ff716344.aspx

  • IOS 7 How to change Mail signature to different font/etc?

    At one point in time, I had a custom email signature in iOS which featured a different font, size and color - no images or HTML.  I had added this by sending the text to be used in an email and simply went into the settings in iOS/Mail and pasted it into the signature field.  This worked. It absolutely did. In all new emails, I had this really nice looking Helvetica Neue looking signature.
    At some point, I went in to edit this nice signature a bit and lost this capability completely.  I've just wasted an entire afternoon attempting to do the same and research how/why this is no longer working - to no avail. 
    Anyone out there have any experience with this?

    I found a post here that solved the issue for me: http://www.bynkii.com/archives/2013/09/stupid_ios_mail_signature_tric.html
    All you do is paste in your rich content and then shake to undo the formatting changes and it magically looks the way you intended.

  • How frequent is mail checking?

    I am trying to decide which email service to use on my iPhone
    So far I have setup Yahoo (which is my real email service), a gMail account and a trial .mac account.
    None of the settings seems to allow you to say how often the phone should check your email system for new messages.
    Yahoo has the push technology, which by reading the forums you learn is very sporadic at the moment.
    What about gmail and .mac? When I send test emails to them from my Mac they sometimes arrive in a minute, other times it can take over an hour.
    If I go into mail on the iPhone I can ask it to refresh, which retrieves the emails but surely the point is that it should periodically check for you

    You know something, I was in the middle of replying to this email with the response...
    "Where? I can not see that option"
    then I found it -- thanks for that, I totally missed it

  • How to change Mail Settings

    My Mail Preference>Accounts has in the incoming (Mac.com) I don't have a mac E-Mail Account and do not want one how do I delete it. The changes I make always default to this mac. thing even the ones I save. If I go to help it just says hit the delete key. That does not work It just makes the blunk sound. Help I have spent hours on this nothing seems to fix it. Thanks.
    Steve

    Thanks for your help

  • How to change mail-enabled security group to security group

    Hi,
    As a test I have configured on the properties page of a security group an email adres. By doing this converted a security group to a mail-enabled security group. Also this group has been transferd to Office 365. But after testing I want to make the distribution
    groups on the Exchange in Office 365. So I deleted the emaila dres of the security group, but it still synchronized to Office 365 as a mail-enabled security group. How can I change in AD the mail-enabled security group to a security group?
    Thanks in advance

    Hi StijnS,
    For the O365 question there are Office 365 technical forums available at
    http://community.office365.com/en-us/f/default.aspx.
    The related article:
    Office 365 Forum Assistant
    http://blogs.technet.com/b/neilhobson/archive/2011/09/20/office-365-forum-assistant.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to change the exchange rate filled in a posted Invoice?

    Hi All,
    an user has posted an invoice in foreign currency. He has forgotten filling in a particular exchange rate.
    I wonder if is possible to change the document filling, in the exchange rate required, so to have the right amount in local currency.
    Thanks
    G.Rossi

    Hi,
    You can not change exchang rate in the already posted document.
    You need to reverse that document and have to create a new one using correct exchange rate.
    Regards,
    Gaurav

  • How to change Mail settings to show mails in HTML or text ?

    Hi,
    I am using SL10.8,
    I somehow changed the mail viewing setting in Mail app to display all mails in text, now html mails loks quite ugly, and I couln't find the option to change this.
    please help

    I am using a Mac Mini with OS 10.8.5. I have the same problem with Mail and HTML images — in particular an email in the form of a grid with concert dates and venues, which displays correctly in webmail in my browser, but in Mail appears as a continuous unformatted and unpunctuated text.
    I have just tried your first Terminal command, and this is what appears:
    Michaels-Mac-mini:~ MichaelGraubart$ defaults read com.apple.mail PreferPlainText
    2014-12-15 18:45:33.458 defaults[27374:707]
    The domain/default pair of (/Users/MichaelGraubart/Library/Containers/com.apple.mail/Data/Library/Preferen ces/com.apple.mail, PreferPlainText) does not exist
    Michaels-Mac-mini:~ MichaelGraubart$
    Can you suggest anything else I could try? I should be very grateful.

Maybe you are looking for