How to Change Main/Primary Partition

How do you change the main partition. I have Disk Utility.

Your question was answered in your other post here
https://discussions.apple.com/message/16506302#16506302
There is a forum glitch that you have to post in the thread to see the posts.
Apple is working on the issue.

Similar Messages

  • How to change main window title of oracle ebs

    Hi all,
    Kindly tell me how can we change the main title of oracle ebs 11i.
    Thanks

    Hello Gloscott,
    Welcome to the Aperture discussion forum. Congratulations. You just hijacked a thread. That's bad form for 2 reasons. First, you added a message to a thread called "How to change main window view" which makes it look like you had information to add that thread, and you did not. Second, people who can help you are more likely to read a message that has your problem in the subject than they are to read this message. I.e., you won't get what you want if you ask for something else.
    That being said, when you repost your query in a new thread, you'll have to be more specific. A "Frame" is not in the regular Aperture terminology.
    nathan
    Message was edited by: Mr Endo

  • How to change the primary harddisk without reinstall

    Hi,
    I want to solve the following task:
    Change the primary SATA harddisk to an new SSD in Small Business Server 2003.
    What I did:
    I installed the SSD in to the system and made a software mirror. The two harddisk showed full synch.
    The problem:
    When I removed the original harddisk to let the mirrored start, it didn’t. It says: “Ntldr is missing”
    What I tried:
    I wanted to use fixboot; however Recovery console (nor from SBS neither from XP) didn’t recognize the partition fully. It recognized the Dynamic partition, but without letter and also didn’t find Windows installation.
    I am looking for an advice how I can transfer the OS to the new disk without reinstall.
    Thanks in advance
    Péter Fischer

    Server 2003 software mirror requires that you break the mirror if you wish to revert to a single disk.  Then, because the boot.ini refers to drive1/partition1, you will need to edit that.  The easiest way to test is to boot from a floppy with the
    boot.ini altered, while keeping your original drive safe from harm. 
    Can you confirm that you don't need to load storage drives unique to that mobo or controller.... I'm guessing not since you used software raid.
    How to make a boot floppy for Server 2003:
    http://support.microsoft.com/kb/325879/en-us
    Having said all that, you will gain little by having the system partition on an SSD drive, and SBS 2003 is out of support in April, so if you haven't made plans to migrate to something newer you might want to start those plans soon.
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • How to change iCloud primary account without deleting ical entries on existing primary account?

    Hi, I've got a bit confused and befuddled with my icloud account(s), as I had a MobileMe account before icloud and an itunes / Apple account.  On my iphone and ipad, I've set up icloud on my itunes / Apple account details, which means I have a photo stream that works between these two devices. I also have something silly like 7 ical calendars on my iphone / ipad; two on an icloud account under the same log-in as my itunes, one on my gmail email account (which is the email account that is also my itunes / Apple account name) and four on a @me.com account I acquired from the old MobileMe days.  Although not perfect, it's worked ok for a while, until I wanted to move photos from iphoto on my mac to my photo stream, and realised I had two photo stream accounts, and the one linked to my mac wouldn't enable photos to be seen on my iphone or ipad.
    So I read a lot of stuff on here and decided I needed to change my primary icloud on my mac, ensuring it was my itunes account rather than my icloud account. I did this last night and all the diary entries in my mac ical disappeared. I then went back and deleted the itunes account details as my primary account and reinstalled the icloud details. On doing this, I realised I only have four calendars in my mac ical - and these are all on my @me.com account, none of the gmail calendars appear.
    What I'd like to do, if possible, is migrate all my @me.com calendars and photo stream into one icloud account, using my itunes log-in details. This will, hopefully, mean I can cut down on the number of calendars on my iphone and ipads, ensure everything synchs across the mobile devices and my mac, and ensure I can use photo stream across all three.  Can anyone suggest how I can do this please?

    When you delete an iCloud account from a device, that has no effect on the iCloud accounts on other devices or the content in that iCloud account. You are just deleting that account from that particular device.
    Her content will still be in iCloud.

  • How to change the primary right in iCloud?

    I set up two emails in iCloud account on Macbook Pro. How can I change the Primary right between these emails? Please help with thanks.

    Do you mean selecting the address which by default appears as the 'From' address when composing a message? Mail Preferences>Composing and set 'Send new messages from' to the required address.
    If that isn't what you mean can you please explain in detail what you are trying to do.

  • How to change the primary node for a resource group. Solaris cluster. 3.2

    I have searched for hours to try to find this answer.
    I want to change the primary node of a resource group.
    example.
    log-rg runs on node1.this.com it will list node1.this.com first when you do clrg status.
    But we run it on node2.this.com
    A reboot will have log-rg run on node1 after a reboot. We have to switch it by hand to run
    on node2 .
    I want it to know that it should always try to first run on node1, but still failover to node2 if the situation arises.
    scswitch -z -g log-rg -h node2 (and all the fully qualified versions of this command)
    would not work.
    How tow can I change the primary node for log-rg (logZ) from node1 to node2???
    thanks!

    Hi.
    Show current configuration for RG:
    clrg show -v log-rg
    For change order Nodelist you can:
    clrg remove-node -n node1 log-rg
    clrg add-node -n node1 log-rg
    But tis command more destructive. It may be problem add-node back to this RG.
    I don't know why Validation of resource log-tiv in res group log-rg on node1 failed.
    Need more know about configuration, resourse type, etc.
    May be it's better create for test small RG and try move and change resource.
    Nodelist - say candidates for run this resources. But at this moment RG can run on any from this list.
    Docs about Sun Cluster.
    http://download.oracle.com/docs/cd/E19787-01/820-7360/fxjbo/index.html
    Typical tasks:
    http://download.oracle.com/docs/cd/E19787-01/820-7359/z40002701009474/index.html
    Adding or Removing a Node to or From a Resource Group
    http://download.oracle.com/docs/cd/E19787-01/820-7359/z400043a1055200/index.html

  • How to change the primary outgoing mail server in iphone

    I am trying to change the primary outgoing mail server from Yahoo to another mail which is my internet provider. I do not know the steps to complete this in my iphone thanks

    If you have more than one email account on your phone, you can change the default account under Settings>Mail, Contacts, Calendar>Default Account. Note that this setting does not appear unless you have more than one account on your phone. So, you'll need to add the email account from your ISP under Settings>Mail, Contacts, Calendars>Add New Account if you have not already done so.

  • How do I delete primary partition?

    So yesterday, I decided to try mountain lion by creating a second partition and doing a clean install onto the second partition.  Since I've decided to keep only mountain lion, what would be the best way for me to delete my primary lion partition?
    I've read about using CCC or Superduper, but was wondering if there are any other easier alternatives like deleting the primary partition and keeping the 2nd partition with ML on it.
    Thanks.

    You need CCC. It's very easy to use.
    Boot from your 2nd partition, download and install CCC and then use it to clone the 2nd into the 1st. CCC will also take care of creating the recovery partition on your 1st partition, which is very important (just follow the instructions when prompted).
    Once CCC is done cloning, boot from your 1st and if everything is OK, you may erase the 2nd if you want to.

  • How can you change the primary partition in Disk Utility?

    I have made another partition using Disk Utility to install Snow Leopard. On my main partition Lion is installed but when i boot into Snow Leopard and try to delete the Lion partition it comes with an error "This operation requires a newer version of Mac OS X for this disk". I tried deleting the partition from Recovery HD but it says it couldn't unmount the disk.
    Is this because Lion is the main partition, can you even delete the main partition?
    And if I do delete the main partition will i be able to move the Snow Leopard partition "upwards" in Disk Utility?

    ralphfromhome wrote:
    1) First of all what is GUID.
    It's the "partition map scheme" Apple uses so your firmware knows what is what on your boot drive, what partitions there are and what format they contain.
    2) Secondly, would I just be able to make a new image in disk utility and use that instead of an external hard drive?
    No, you need something to boot off of and remove all data off the internal drive that's going to be reformatted with a new parttion, that's why you use the free Carbon Copy Cloner, it does both in one shot and it "blesses" the drive to make it bootable.
    3) When I use Carbon Copy cloner will it only copy Snow Leopard Installation or all of my files also?
    It copies everything in your Snow Leopard partition to the external drive, files, programs the OS everything except whats in the Trash.
    4) In your 8th step you mentioned repairing permissions on both. Both of what?
    Both drives, the internal and the external clone in Disk Utility (ignore the long list that appears)
    It's a safety check to make sure your permissions are set back to original settings, I think the newer version of CCC now does this, but I havent' checked, doesn't hurt to do it again.
    5) If you still feel like typing can you tell me how long this whole process might take?
    Formatting a external drive
    You should Erase with Zero option first, that will take a hour per 500GB
    Formatting shoud be rather fast, a few minutes.
    Cloning Snow Leopard to the external drive should take about a hour per 500GB
    Formatting the internal drive a zero erase first for safety should take another hour per 500GB
    Reverse cloning Snow Leopard back onto the internal drive should take another hour per 500GB
    Good thing about it, it's pretty much all ciick and go watch TV while it works.
    I was actually planning to make a Genius Bar appointment to fix it, by the way does that cost much?
    No idea, but you don't have to pay if you get a external drive for $70 or so, CCC is free.
    You get to keep the external drive and use it later for cloning as hard drives die all the time, the clone would get you back to using the computer.

  • I'm back! How to change main email address and make i WORK?!

    Okay, so i got my mail app. back ( thanks guys! you know who you are!) But, I had tried to change the email address to my last one, which didn't work. So now that I have a .mac account, I'd like to know...how can I change my main email address to a .mac account ( I think i know how to, but i was wondering what i should change everything to ie. when it says outgoing mail server...what do it put) Thanks guys! I know someone will know...you guys are like....REALLY SMART!!
    haha Thanks!

    Is your main email account/address provided by your internet service provider used for connecting to the internet and is this email account still active?
    If so, you need to create this account in Mail and must know the account type - POP or IMAP, the incoming and outgoing mail server settings, the user name format - usually the portion of your email address in front of the @ sign only but with some providers the user name is the entire email address. You can get this information from the email account provider for the account.
    You can't change your main email address to a .Mac account if not provided by .Mac.

  • How to change the primary apple id on iMac?

    I was recently divorced and got the iMac in the divorce. However, the original apple id was under my ex. Now, no matter what I do, I can't get it to accept my apple id as the primary. I have logged off on his apple id and have logged in under mine. Then when I go to update, it has his apple id grayed out and states I need his password. It will not allow me to change it to my apple id. Any help would be greatly appreciated!!

    You'd have to erase the hard drive using either the original install disks (Snow Leopard or earlier) or Internet Recovery (Lion or later) by pressing Command + Option + R keys until you see the Utilities screen. In either case, erase the hard drive and then choose to reinstall the OS. You can then update using your own Apple ID. This should be the same process as buying a Mac which has not been prepared by the seller as required (the original OS reinstalled).

  • How to change (decrease) primary key column length?

    Hi all,
    I have plenty of data in the table and I need to decrease the primary key column from CHAR(17) to CHAR(13).
    I try to use:
    ALTER TABLE xx MODIFY (prmy_key (13));
    but Oracle give:
    ERROR at line 1:
    ORA-01441: column to be modified must be empty to decrease column length
    Can anyone give me advice on what is the best way to decrease column length? Thanks in advance for your help.

    To add to the above, I have done a simple test in the lines that I was suggesting the solution for this problem,
       CREATE TABLE testA
       (pk_col   varchar2(20), jd date, constraint pk1 PRIMARY KEY(pk_col));
       --Insert data into testA
       create table testB as select * from testA;
       TRUNCATE table testA;
       ALTER TABLE testA modify(pk_col VARCHAR2(10));   
       INSERT INTO testA SELECT substr(pk_col, 1, 10), jd from testB;
       DROP TABLE testB;
       Select constraint_name, constraint_type, status from all_constraints
       Where table_name = 'TESTA';
       CONSTRAINT_NAME                C STATUS
       PK1                            P ENABLEDAlter command is successful as the table is empty. TRUNCATE flushes the data and resets the high water mark keeping all the constraints. If we safely want to use the TRUNCATE as far as storage issues are concerned,
    TRUNCATE table table_name reuse storage;
    I think, this would accoplish what has been asked.
    Let me know,
    SriDHAR

  • How to change primary keys of existing InfoCube.

    Greetings everyone!
    I’m trying to change the Key Fields in my reporting architecture as per our new company mandate.  I’ve been able to successfully change the primary keys for DS, DSO and InfoSource.  Can any kind soul out there please tell me how to change the primary keys on an existing InfoCube?  I will surely appreciate all the assistance I can get.  Its kinda urgent!
    Regards,
    Philips

    Hi,
    Check the possibility with Remodelling option . If it is not possible with Remodelling, then you can only change the cube deleting the Data.
    With rgds,
    Anil Kumar Sharma .P

  • How do I change my primary @me address associated with my Apple ID.

    To be clear, I know how to change my Apple ID, but I don't know how to change the primary @me address associated with it.  I have seen many people reply about setting up aliases through icloud as well responses that continue to explain how to change your Apple ID.  I do not want to change my Apple ID.  I want to change the @me email address associated with it.

    See the FAQ - http://support.apple.com/kb/HE37 cannot be done for those special cases of @mac.com and @me.com addresses.  You can add a secondary address to the AppleID if you no longer use or receive mail at the primary, but those primary cannot be altered.

  • How do I change my primary email for Apple ID?

    I would like to change my primary Apple ID email, but the system won't allow me since my new wanted primary email is currently my back-up email. I tried to delete that email from being a back-up email but it still would not work. Any suggestions?

    This Apple document describes how to change the primary email address.
    Change your Apple ID - Apple Support

Maybe you are looking for