How To Change Map Drive for my Database?
Hi all,
I bought an external Usb Disk with 1TB storage capacity and attached it to my laptop, because I am running out of space for new 11g Database Creation.
It was mapped by default at G:\ then I created a new database 11g on it. Then during night time, I shutdown my laptop and remove my external disk.
Next morning I startup my laptop again and attached by external disk. But to my surprise it is mapped as E:\ so I can not startup my database :(
How can I switch it back to G:\ please.
Thanks a lot.
KinsaKaUy? wrote:
Hi all,
I bought an external Usb Disk with 1TB storage capacity and attached it to my laptop, because I am running out of space for new 11g Database Creation.
It was mapped by default at G:\ then I created a new database 11g on it. Then during night time, I shutdown my laptop and remove my external disk.
Next morning I startup my laptop again and attached by external disk. But to my surprise it is mapped as E:\ so I can not startup my database :(
How can I switch it back to G:\ please.
Thanks a lot.
Hi,
Right click on my computer, choose manage, choose disk management under storage, choose your external drive, right click and choose change drive letters and path, change it to G:
Cheers
Similar Messages
-
10g express, how to change port number for the database home page
10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jlAndy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl -
How to change optical drive for Portege R500-135
Hi,
I need to change my optical drive but i don't kown where to buy one.
The reference of my laptop is PPR50E-08M046FR.
Thx
RgdsHi
As far as I know its not easy to replace the ODD because its hidden under the bottom cover this cover needs to be removed firstly in order to get access the CD/DVD drive, HDD, etc
But I found a useful page:
[Portege R500|http://www.irisvista.com/tech/laptops/Toshiba-Portege-R500/disassemble-laptop-remove-hard-drive.htm]
But note; everything what you do, it your own risk you could dame the notebook parts. So be always careful and dont use force -
How to install Oracle Change Management Pack for 11g database.
Hi,
I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
Oracle Configuration Management Pack
Oracle Data Masking Pack
Oracle Diagnostic Pack
Oracle Tuning Pack
using following URL
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
Regards
DBA.As far as I could understand, this is a part of Oracle EM/Grid installation:
The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software. -
Is this possible to already reserve 2 TB of space on a data drive for one database
Is this possible to already reserve 2 TB of space on a data drive for one database.
Please suggest how to do this.
Best regards,
VishalYou can either change the current filesize of current files in your database or add new file(s) whose current size is 2TB by using the ALTER DATABASE command. If you don't have instant file initialization, adding 2TB to data files can take a long time.
If you are adding 2TB to log files that can take a long time whether you have instant file initialization or not. For info on instant file initialization see
http://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx
and
http://sqlblog.com/blogs/tibor_karaszi/archive/2009/03/09/do-you-have-instant-file-initialization.aspx
In addition, there are several good links in the comments to Tibor's blog entry, especially the links to Paul Randal's blog.
Tom -
How to change destination drive? From C to D?
How to change destination drive? From C to D?
Not enough disk space on drive C
Solved!
Go to Solution.Which device and destination for what ? Is it for the Nokia Store downloads ? If 'Yes'.. Go to Nokia Store in your phone and Log-in ..Then go to Options --> Account --> Settings --> Installation Preferences .. and select the appropriate destination..
-
HI!
I am updating a table in sql server 2000 using PreparedStatement but as im trying to updateit. SQL is giving error or rather we can say warning.
java.sql.SQLWarning: [Microsoft][SQLServer 2000 Driver for JDBC]Database changed to BRSHere BRS is my database name.
no error is generated .all the PreparedStatement is executes normally.
Can any one tell me anything about thisAll the PreparedStatement is executes normally.But data is not updated in the database.
-
How to change a connection with the database in Runtime?
How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth -
How to change price total for "Change Unit Cost Estimate Screen" for KKE1 Tcode ?
There is a requirement of bringing the Material Price in KKE1 while entering the Item Catogory M ( M for Material) from the Gross Price in the condition type (P001) that is entered in the Purchase order.Currently systems brings the material value from MAP(Moving average Price) in the Material Master data.
I have looked into the user exit 1) EXIT_SAPLKKEC_001 2) EXIT_SAPLKKEC_002 available in this T code KKE1.When I put break-point in these user-exit,it is not going in debugging mode while fetching the price value in Price total column for "Change Unit Cost Estimate" screen in KKE1.
How will change pricing condition for material in KKE1?
I want to change price condition for material as marked in red as shown in the screen-shot.
Where will write the code such that I will bring Price Total based on material number as shown in the image?Hi Ram,
I think you can do the same in thei manner.
Go to program SAPMV45A.
use menu GOTO -
> Text Elements----
>Text Symbols
Here make change of Text-002 Sold-To Party as saleable .
Regards,
Pravin -
How to change default approval for ResourceAuthorizerApproval ?
Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M. -
How to change a color for a row in ALV grid display
Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plzHello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks! -
How to change material component for a Purchase Order?
How to change material component for a Purchase Order?
I need FM .
PLEASE helpDear ,
Create PO with item category L....There in Item detail you will get tab for material.
There click in component Button, it will take you to the component screen there you can assign and deassign components.
Hope this helps.
Regards
Utsav -
How I change the icon for iTunes songs?
When I drag iTunes songs onto my desktop the icon is white with a gray iTunes icon. How can change this icon for all of my iTunes songs?
Thanks Patrick. I used Control-Click on the actual audio file on my desktop opened the Show View Options menu and turned off the icon preview option. That changed my icons from gray with a white background to red with a white background which is exactly what I wanted. You pointed me in the right direction. Appreciate it.
-
How to change Apple ID for all applications in iPad2?
I have changed Apple ID via Settings > Store > Apple ID > Sign out my old Apple ID > Sign in with my new Apple ID.... But, by this method, Apple ID in iCloud, Facetime, and iMessage isn't changed follow to my new one! Do I misunderstand about changing ID? and How to change Apple ID for these applications?
PS. I do not want to do hard reset my iPad2
Thank you all for your kindly help ^^Go into Settings > iCloud > Account > Change to your new Apple ID
Settings > Messages > Recieve At > New Apple ID
Settings > Facetime > Change to new Apple ID -
I cannot find how to change the language for labels in a quiz
I cannot find how to change the language for labels in a quiz
You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.
Maybe you are looking for
-
How do you change your apple id on your iphone 5
how do you change your apple id on your iphone 5. I also increased storage and cannot update to latest software upgrade! ANNOYING!!!! Yes, I logged in and out of the Ap Store and it is correct on that end. I have signed in on my PC too and connected
-
I cannot get into the app store my apple id is not working
i cannot get into the apple store via i tunes would not allow me to sign in
-
IPhone 3G 2.02 - Geotagging still only in the western hemisphere!
I cannot believe that we are into the second bug-fix and the eastern hemisphere bug isn't fixed in 2.02. http://home.online.no/~refsvik/pub/iphone202geotagbug.png I have done several complete restores and cannot get this to work on my new iPhone 3G.
-
Can I automatically perform "one last operation" on SAP system shutdown?
Dear experts, is there any way for a job/program to catch an SAP system shutdown ? In the list of available standard events for job scheduling there is an event SAP_SYSTEM_STOP that looks quite promising but unfortunetaly it doesn't work. Do you know
-
AppleScript and MIDI comms - is that possible?
I'm getting into AppleScript, had a lot of fun with FaceSpan - now I want to talk to my musical instruments over MIDI, how can I do that using AppleScript? It seems I need some "interface" between the AppleScript and the serial port. My latest idea i