How to change massively in some folders the permissions owner ?

Hi:
We have some folders in SAP Portals 2004s (7.0) with a user which is the ACL permission owner and the Services permission owner of these folders.
We need to change that owner massively in these folders to a group without using the user of that owner.
How can we do that ?
Thanks in advance,
Felipe Mendivil Ortiz

Hi Felipe,
it seems that you have missed one thing (in terms of understanding).
The System Principal is a special permission. It is like defining a super admin user who is able to do a lot of administrative things in the Knowledge Management platform. This special permission can be applied to every existing portal user (independent of the other permissions the user has) but also to a group or a role. All users assigned in that group or with that role will become a system principal and have the defined permissions.
As you've mentioned above, when you create a new system principal definition you can type the following:
1) Name - To be on the safe side I would use here the same UserId/RoleID/GroupID as in the User Name /Role Name /Group Name field.
2) Change Resource Permissions - If you check this box, as mentioned in SAP Help, the defined user/role/group is able to change resource permission for every resource (document or folder).
3) Service ACLs - Yes, here you define if the user/role/group should also be able to change service permissions for every resource (document or folder), or not.
4) Set System Properties - This is for properties that are not set over the UI (Details screen) but can only be set via API. Sometimes you want to have a system user, which you define as system principal and give him this permission to user this user to set system properties.
5) Unlock Permission - As mentioned in the SAP Help link, with this permission a system principal could remove document locks set by other users.
6) Resource Permissions - Here you define what the system principal (user/group/role) is allowed to do in KM (besides the above defined status of changing permissions). If you selected only READ, the system principal will only be able to read ALL resources (files/folders) in KM. It should be clear what happens if you define READ, WRITE, DELETE.
7) User Name - Type here the User ID of the user(s) that you want to give this system principal status. You can have here a comma separated list.
8) Audit Actions - By checking this box, every time the mentioned user changes permission / unlocks objects / etc. this action will logged. You will be able to see it in the [KM audit|http://help.sap.com/saphelp_nw04/helpdata/en/44/a9b4e2f9677455e10000000a11466f/frameset.htm].
You will not find a initial path definition, because you can not restrict a system principal on a special path. The system principal is defined global for ALL KM repositories.
Hope this clarifies all your questions,
Robert

Similar Messages

How to change it if some data is wrong in ODS and infocube

hi all:
could you please tell me how to change it if some data is wrong in ODS and infocube ?
Best regards

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

How to change datasource name based on the partition in configplan

Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?

If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar

How do we know that some of the jobs have been held up in the BW system.And

How do we know that some of the jobs have been held up in the BW system.And after we know that some of the jobs have been held up, how do we restart it?Please provide me an answer.It is very important.I will assign points
Regards,
Poonam

Hi,
Tcode sm37 is the place where you can see the background job status.
Jobs have been help up
as per my understanding
1) job has been triggered and kept it in hold
Now when a job has been triggered, and is kept in hold for its associated process, then you have to wait, becuse the target on which the job has been run is currently used by other and because of this the present job is kept in hold.
Also see the st22 for any shortdumps.
2) Job itself has not yet triggered
The jobs will be in released state and will not trigger, normally this occurs when that particular job is waiting for the event to trigger it, and probably the even has not yet triggered or even if triggered the communication mightnot have been made to the job to trigger. These situations can be attributed to many things lyk system performance, or some internal comm failure, some DB dead locks etc.,.
Now for the first one, start the job immediately with high priority ( if required ) and once completed reschedule it again as normally it is running
for the second , you can trigger the particular event in sm64 and c has the job came to active state or not.
or else you can copy the job and schedule is immediately.
Hope this helps
Janardhan Kumar

Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

Hi Ivanlaiwh,
I have been doing the modification regarding your account.
You should now be able to proceed to a new purchase.
Thanks.
Arnaud.

How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.

How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.

Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

HT201441 i just bough a used iphone but looks that it was found and i cant unlock it. its still link to the last user my question is how do i find out who is the last owner so i can unlock it

i just bough a used iphone but looks that it was found and i cant unlock it. its still link to the last user my question is how do i find out who is the last owner so i can unlock it

peeweenborre wrote:
i just bough a used iphone .... its still link to the last user ...
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund,

How i can open my ipad if the previous owner forget his apple ID

how i can open my ipad if the previous owner forget his apple ID

A valid bill of sales with serial number would be a good start.
Probably a better solution would be have the previous owner check with Apple to find out what his old password was.
Allan

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
Reset the PRAM and the SMC, which might contain personal information.
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

I found a iPad Mini and would like to return it to the original owner. I believe it was previously stolen and it cannot be activated. Any idea how I can get it back to the original owner?

I found a iPad Mini and would like to return it to the original owner. I believe it was previously stolen and it cannot be activated. Any idea how I can get it back to the original owner?

I am very disappointed (yet I somewhat understand) Apple and how they completely have no interest in helping return lost items. I don't believe the person who traded me this was from around here so I don't even know where to begin. I seen on ebay you can sell them for parts but I don't really believe in doing that and would like to at least try my best to get it back to whom it belongs to. I will be contacting my local police department regarding this but I don't think they will be able to do much if it was stolen from somewhere else. However if nobody claims it in 90 days and I have a letter from my local police station saying I am the new owner, will that be enough for apple to unhold their policy of proving the item belongs to you?

How to change default view for folders?

Whenever I create a new folder, the view always defaults to icons with the Sidebar visible. I want all newly created folders to open in list view, and I don't want to see the Sidebar. Can anyone tell me how to change the defaults? Thanks...

I'm not sure how to make it default, but I think you may be able to get rid of the sidebar for a whole session (you probably have to get rid of it again once you've restarted).
Just disable the sidebar by clicking in the little white ellipse/oval thingie in the top right corner of a new finder window. Then when you open new windows, or open folders in that one, they should all come up without sidebars, and in the same format. I hope that works for you, but honestly I don't know why you wouldn't want the handy sidebar

How to change Default Web Templete in the BI System

Hi Experts,
Currently user access queries using WEB BEx Analyzer and the templete is 0Analyzer.
When we develop a query in Query Designer will publish the query in the relevant roles and user can access that query through WEB BEx Analyzer and the templete is 0Analyzer --Open Query option.
Now we want to change the Default templete from 0Analyzer to 0Analysis_Pattern
Could you please update me on how/where to
1) First check what is the default templete defined in the system and
2) How to change the default templete from 0Analyzer to 0Analysis_Pattern.
Thanks

Hi,
I am using BI 7.0
When i go to RSCUSTV27
'Change View "Set Standard Web templetes"
Customizing ID : Business Information Warehouse
Set Standard Web Templetes
Broadcasting
Query precalcilation
Report Precalculation
Enterp report
Ad Hoc Analysis
Every thing is Blank
But currently we are using 0ANALYZER web templete
Please update
Thanks

How to change properties for some controls in runtime ?

hi,
I would like to change some of the properties for some controls in front panel in runtime. Number of control properties I want to change is depending of a log file user opens in final application.
I attach an example where I'm trying to change the visibility of numeric controls. Problem I have I don't know which reference to connect to property node in case the control in for loop is not a numeric control. The example relies to label.text property but I could use the more generic classname property as well.
regards,
petri
Solved!
Go to Solution.
Attachments:
dynamic reference.vi ‏11 KB

pcardinale wrote:
Initially, a control has no caption. It's not just that the caption string is empty and the caption not visible, but the caption object does not exist.
I think this should probably be changed in future versions, because even if each control had a caption, it would still be a negligible small part of the VI. The current behavior made sense many years ago where HD and memory space was very precious. Not any more!
This issue comes up often enough that it warrants addressing the root of the problem.
It is hard to convince the casual that the caption does not exist if he can simply do a "show caption" at edit time and it will show in all glory, even with the default set to the current label. It is confusing!
There is even an idea about this that seems worth supporting (also read the link in the discussion).
What do you think?
LabVIEW Champion . Do more with less code and in less time .

How to change Labels of Fields in the search help shown as F0001 F0002 etc

Dear All,
For one of my fields of screen I have been calling a search help configured using F4IF_INT_TABLE_VALUE_REQUEST.
In this function I am returning the field in dynfields. Let me know please how to change the Labels of Field Names being shown in the search help as F0001, F0002 etc....
Regards,
Alok.

Hi Alok,
You can change the Field Label by going to the Data Element and changing the Field Label .
Hope this helps
Regards
Sunil

How to change 'created by' name in the smartform

Hi,
I have copied one standard smartform into Z_smartform. My z_smartform is having 'created by' name as in standard smartform.
Could anyone please tell me how to change that name to my name.
Thank you,
Regards,
Kusuma.

Hi,
Now I understand. I tried to reproduce your problem by copying a standard smartform and the 'Create by' had my user ID. But now you say you uploaded the smartform from a file it becomes clear.
The uploaded smartform will retain the user ID from the original form, if you want to change this copy the form to a temporary name, then copy it back again to the original name.
Regards,
Nick

How to change massively in some folders the permissions owner ?

Similar Messages

Maybe you are looking for