How to change member names in mass

Hi,
Does anyone know if it is possible to change about 100 member names all at once in Essbase instead of doing this manually?
Thank you!

Good idea, Sunil, and I've done this in the past. You don't even necessarily need to do that 'dummy parent' stuff if you have a source file from which you can build the entire dimension again with the 'remove unspecified' option.
I've also used Glenn's approach.
What you really must think about in either situation is whether any of the new names match existing member names. That definitely complicates things.
Honestly, if you don't already have the code written, for a strictly one-off 100 member change it would probably be faster to suck it up and work through them in EAS. But where's the fun in that, right?

Similar Messages

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change the name of a BADI Implementation?

Hello experts,
Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
Thanks in advance,
AK

Hi,
Please go to transaction SE19, enter your implementation name.
Then go to menu: Implementation -> Rename -> ...
Regards,
Ferry Lianto

How to change you name in iCloud

My dad regestard my iPad onto his name then I had to change my name on iCloud because when I send email on my iCloud email address it says Philip on it. I don't want people to laugh at me so I changed it my name now my dad got me an iPhone and he regestered it on his name and in my iCloud email it says Philip instead of sofia I want my iCloud email address to have my name on it not my dad's I can't remember how to change the name. Please tell me or I will never use my iCloud email address ever again.

I have the same problem, and I trued doing what you did and change my name but it still doesn't say my name(I'm a girl and the name is a guy's)

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

How to change datasource name based on the partition in configplan

Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?

If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar

How to change the name of column in ActionScript?

I possibly know how to change the name of the column in DataGrid using mxml but dont know how to change the name of column in DataGrid using ActionScript.
var newDataGrid:DataGrid=new DataGrid();
newDataGrid.dataProvider=arrayCollection():
It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
Please HELP!

Give your datacolumn and id. Then set the property for that column through the datacolumn id.
DataGridColumn id="nameDC"
Script:
nameDC.headerText = "Name";

HT204053 Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

Can anyone tell me how to change the names of the networks I have set up on Airport Express

Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

Hi mkl1961,
Happy Holidays! The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.
Resetting an AirPort base station FAQ - Apple Support
http://support.apple.com/en-us/HT3728
What default settings will my AirPort base station have after a hard or factory default reset?
AirPort base stations are set to request an IP address by DHCP.
AirPort base station passwords are "public."
AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
*A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port. You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
Airport Express Setup Guide
manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
I hope this information helps ....
- Judy

How to Change Computer Name

Two questions...the first is to find out how to change the name of a computer. When I pulled data of of my previous Mac, the name stuck onto the new one.
Secondly...an old email address keeps popping up in my keychain. Anyway to get in and delete that?
Thanks for any help.

I recently added another iPhone to the Mac inventory and up initializing, it asked if I wanted to make a certain email address my default. I've not used that address for quite a while. I've seen this address pop up a couple other places too, so I'm wanting to retire it for good.
Thanks for you help on the first question.

How to change of NAME and IP after RAC installation.

Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.

Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK

How to change Server Name on BPC Connection Wizard in Mass

Hi there,
I need to know if there's a way to change Server Name in Connection Wizard on a large number of PCs, using a configuration file that can be deployed to the PCs that need the change.
Thanks for your response.
Cheers,
Rodrigo

Apparently the Server name is stored under:
HKEY_LOCAL_USER\Software\VB and VBA Program Settings\Outlooksoft
5\LATEST for each user who uses BPC under the data containing "SERVER"
So this is going to help on this requirement, previous a registry backup.
Cheers,
Rodrigo

How to extract Member Names in MDX script?

I have a MDX script that by default gives me member aliases. How can I change it so it'd give me member names? I know I can use something like that:
NON EMPTY [Employee].Levels(0).Members DIMENSION PROPERTIES [Employee].[Member_Name]ON AXIS(4)
but then it gives me member aliases AND member names, and I need the names only.
Thanks!

The syntax you have is the way to get the member names, but as I said you wouldn't like the way it is displayed. MDX is not a reporting language and so it does not have the nice formatted selections. You will get both alias and member name by using the properties. you could run the output through some sort of parser (Perl perhaps) to get the format you want

How to change domain name on Windows 2003 running Exchange 2007

Hi all,
I have a windows 2003 server running Exchange 2007. I am wanting to rename the domain, however when I search the web for the process to perform a rename of the domain I see "The domain rename operation is not supported in Microsoft Exchange Server 2007".
How can a domain name be changed? http://technet.microsoft.com/en-us/library/cc781575%28v=ws.10%29.aspx
The server runs active directory, dns, dhcp, and Exchange 2007.
This change is being inspired by the change with SSL certs where internal addresses like .local will no longer be supported in the third party certificate registrars. Recently we renewed our cert and did not include the .local URL. Now the internal
systems are getting warnings about the cert. I tried generating an internal self signed cert but it seems only one cert can be valid with exchange 2007 running on windows 2003. Thus the internal cert replaced the external cert and allowed
the internal systems to run without complaining about the cert but the external access was causing warnings. I reversed back to the third party cert. This cert has company.com and mail.company.com and autodiscovery. I believe if I rename
the server to server2.company.com the autodiscovery will allow the server2 to be mapped to company.com and the cert will be valid for internal clients.
Do I have this correct? Are there errors with what I have found so far?
Any suggestions about how to solve this issue short of getting a new server? How can I rename the domain?

Hi,
As you mentioned, the domain rename is not supported in Microsoft Exchange Server 2007.
About your question with certificate, we can change URLs to xxx.domain.com. More details about this workaround, please refer to:
https://support.microsoft.com/kb/940726?wa=wsignin1.0
Note: please make sure the same name with certificate.
Additional, Microsoft do not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
Best regards,
Allen Wang

How to change member names in mass

Similar Messages

Maybe you are looking for