How to change messaging storage on N97

The N97's messaging app has a setting (under 'Other') to change the messaging storage (default Chone Memory).
I set that to 'E: Mass STorage' but then messaging ended up showing only 'memory full. cancel some other programs' messages (but E: of course has > 17GB free!
When i switched back to C: all started working again and messages there are visible again.
So how do I change the storage messaging uses to E: ?
I also want to copy (better: move) all the messageing folders from C: to E: to free up more phone memory.
Any help is appreciated

I'm not sure if this will help or not - but as far as I could find there was no way to move the actual messages from C to E, other than perhaps backup from C then restore to E - which I didn't need to try to do.
In my case I set my Messages to E right from the start, but when I later connected my phone to PC Suite in Media Transfer mode, it reset my Messages location to C. I thought I'd lost all my messsages, They reappeared when I realised the setting had changed, and I changed it back to E. The system hadn't copied my messages from E to C, just created another message store on C (which I later deleted).
So I don't believe setting your Message store location to E will also copy your existing messages from C to E.
To free your C space, I would backup your messages, then delete your C drive mailbox (there is a thread on the popular threads link on the front page), then restore your messages to E.
Again, I have not actually done the backup and restore, but I am of the opinion it would be the only way to move the messages.
Perhaps someone else may have a better idea - this is just one I am throwing out there as a possibility.

Similar Messages

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

How to chang message "W" to "E"

Dear all,
During creating Delivery for sales order, I am facing the following waring message.
Delivery quantity must be entered for the item
Message no. VL361
Diagnosis
The delivery quantity must be greater than zero, as defined in Customizing for the item category of this delivery item.
Procedure
Enter a quantity greater than zero in delivery processing.
Should this error message appear when you are confirming a WMS transfer order that you want to close with a quantity of zero, it could be that the delivery item does not allow a quantity of zero. If necessary, ask the person responsible for Customizing if this is intentional. If so, you cannot confirm the transfer order with a quantity of zero.
I hope the message is eror.
How to chang message "W" to "E"?
colin

Hi
SAP has given some messages which can be converted from waring to error and vice versa thro customization
All that SD related messages which is offered by standard SAP you can find in OVAH and OVM1
your message VL361 will not be there in OVM1 which means that standard SAP has hardcoded this message type thro its program and not available for customization
Go to SE91 and do the following:-
input VL in Message Class
input 361 in Number and execute.
select the message number and click on "Where-Used List" (press Cntrl + Shift + F3)
Deselect all boxes excepting "Programs"
List of programs will be displayed where this error message is used
Double click on the description in right side of the screen
You can see the codings written for the error message as W361 which may be changed to E361.
This is a modification of the codings of the standard program which standard SAP does not recommand and if still you want to go with it it needs to be done thro ABAPer which will ask for developer access key etc
Regards
Raja

How to change message v1 501 to be an error message ?

Hi guys,
When i use VA01 creating a sales order reference to contact, if sales order's quantity is larger than contact's quantity, the system gives an warning message :
Target qty of reference: 100 PC (total referenced: 101 PC)
Message no. V1501
I can't find V1 501 with tcode OVAH , anyone knows how to change Warning to Error for this message?
Thanks.

Dear wayne,
Please refer to my post (3rd post):
[Message Control - Warning/ Error|Well done Amit;
Your Message V1 501, can't be customized to Error from Warning, in customizing. Instead, chnages needs be done in Standard Code, to achieve the same.
Best Reagrds,
Amit.
Note: I think, following thread have the same relevance;
[Message control|Re: error/warning message]

How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE

Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.

Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
   Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
    lw_item_data-deliv_numb           = lw_lips-vbeln.
    lw_item_data-deliv_item             = lw_lips-posnr.
    lw_item_data-material                = lw_lips-matnr.
    lw_item_data-fact_unit_nom      = lw_lips-umvkz.
    lw_item_data-fact_unit_denom = lw_lips-umvkn.
    lw_item_data-base_uom            = lw_lips-meins.
    lw_item_data-sales_unit            = lw_lips-vrkme.
    lw_item_control-deliv_numb      = lw_lips-vbeln.
    lw_item_control-deliv_item        = lw_lips-posnr.
    lw_item_data_spl-deliv_numb   = lw_lips-vbeln.
    lw_item_data_spl-deliv_item     = lw_lips-posnr.
    lw_item_data_spl-pick_denial   = 'X'.
    lw_item_data_spl-stge_loc       = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_lgort     TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
    APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data       = lw_header_data
      header_control   = lw_header_control
      delivery               = v_delivery_no
      techn_control     = lw_header_tech_control
    TABLES
      item_data           = li_item_data
      item_control       = li_item_control
      return                 = li_return_change
      item_data_spl    = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
    CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
    READ TABLE li_lips INTO lw_lips
    WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
    IF sy-subrc EQ 0.
Passing the delivery details into Item level table
      lw_item_data-deliv_numb              = lw_lips-vbeln.
      lw_item_data-deliv_item                = lw_lips-posnr.
      lw_item_data-material                   = lw_lips-matnr.
      lw_item_data-batch                       = w_lqua-charg.
      lw_item_data-dlv_qty                    = w_lqua-verme.
      lw_item_data-dlv_qty_imunit         = w_lqua-verme.
      lw_item_data-base_uom               = w_lqua-meins.
      lw_item_data-hieraritem                = lw_lips-posnr.
      lw_item_data-usehieritm                = 1.
      lw_item_data-fact_unit_nom          = lw_lips-umvkz.
      lw_item_data-fact_unit_denom      = lw_lips-umvkn.
      lw_item_data-sales_unit                 = lw_lips-vrkme.
      lw_item_control-deliv_numb           = lw_lips-vbeln.
      lw_item_control-deliv_item             = lw_lips-posnr.
      lw_item_control-chg_delqty           = 'X'.
      lw_item_data_spl-deliv_numb        = lw_lips-vbeln.
      lw_item_data_spl-deliv_item          = lw_lips-posnr.
      lw_item_data_spl-stge_loc            = w_lqua-lgort.
      lw_item_data_spl-pick_denial        = 'X'
Appending work area into internal table to pass as parameter
      APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
      APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
      APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
      CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
                    lw_vbpok, lw_lips.
    ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data           = lw_header_data
      header_control       = lw_header_control
      delivery                   = v_delivery_no
      techn_control         = lw_header_tech_control
    TABLES
      item_data                = li_item_data
      item_control            = li_item_control
      return                     = li_return_change
      item_data_spl         = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.

How to change message text encoding in multiple e-mail messages?

Hello!
I'm newcomer in AppleScript. I have imported a lot of email messages from mbox.
The problem is that some of messages are displayed in correct russian encoding (KOI8-R) but
other messages displayed with incorrect encoding. So i need manually set their encoding
via mail menu to Cyrillic (Windows) to be able to read them. I got about 1000 of those messages.
Is there any possibility to mark those messages in mail and then run AppleScript to change
their encoding automatically?
something like that (that script is not working one):
tell application "Mail"
set selectedMessages to selection
if (count of selectedMessages) is equal to 0 then
display alert "No Messages Selected" message "Select the message you want to get the raw source of before running this script."
else
set message text encoding to "Cyrillic (Windows)"
end if
end tell
Thanks!

I was able to get it to work on all selected emails using this script:
(Note I changed the encoding to "Simplified Chinese (EUC)")
using terms from application "Mail"
tell application "Mail"
set theMessages to selection
tell message viewer 1
repeat with themessage in theMessages
set selected messages to {themessage}
activate application "Mail"
tell application "System Events" to ¬
tell menu item "Simplified Chinese (EUC)" of menu 1 of ¬
menu item "Text Encoding" of menu 1 of ¬
menu bar item "Message" of menu bar 1 of ¬
application process "Mail" to if (exists) then click
end repeat
end tell
end tell
end using terms from

How to change message V1801 to error message?

Dear expert
In sales order creation, Message no. V1801 u201CPricing error: Mandatory condition is missingu201D will display if material condition does not exist.
But the incomplete sales order still can be saved, how can we set V1801 to error message and sales document canu2019t be saved
Thanks

Set the incompletion log for pricing in OVA2 as follows:-
Table:::Fld name:::::Description::::Scr.:Status
VBAP:::::PRSOK::::::::Pricing:::::::PKON:::06
By doing so, sale order cannot be saved. Also dont forget to assign this incompletion log to your item category in VOV7
thanks
G. Lakshmipathi
Edited by: Lakshmipathi on Apr 28, 2011 1:49 PM

How to change data storage in Planning?

I want to change the data storage property of a base member in Planning from Shared to Store. When I cilcked on EDIT, I don't see the option for data storage. Where should i go?

I remember you posted questions about using Outline Load Utility. You can use OLU to update data storage properties. In your csv file have the following format:
Parent Account Data Storage
Assets Asset1 Never Share
Just an option to updating members manually if you have a lot of members to modify...

How to change message class selected for validation ?

Dear all,
For testing, I have created a new validation (applic. area : FI, Callup point:2) with a existing message class (/EACA/BTA_GL).
But now, I would like to create a new validation for the same application area and callup point, but with another message class (that I have created with Z_...).
But unfortunately, I cannot choose another message class when I create a new validation.
Could you help me ?
Thank you and best regards

To change the message class of a callup point please use program
RGUGBR28 (description in SAP note 6975). After making the change,
generate the coding with program RGUGBR00 for the application (without
marking the last two checkboxes).
kind regards,
Diogo Peretti.

How to change the storage location while create delivery?

Hi all:
I have to question to trouble you,when I create a delivery with reference to a sales order,however every time it set storage location 'FG10' to the delivery automatically.I can modify it, but how to modify this default value?the sales order haven't information about storage location.
thanks.
Best regards
lance

Hi Lance
Please try this:
In SPRO, go to Logistics Execution - Shipping - Picking- Determine Picking location - assign picking locations
here, for the reqmt plant and shipping point and storage conditions, define the applicable storage location. If you are not assigning any storage conditions in you material master, you may leave it blank. Storage conditions can be defined in the Material master in General Plant Data / Storage view.
After maintaining this, try creating a delivery and see if the delivery gets created in the required storage location.
Please reward points if this helps you
Rgds
Nageshwar

How to change messaging server attachment quotas

Hi All
We have messaging server version 7.3.currently we are able to send 1MB,But we want to change it to 10MB,where need the chage,please help.
-bash-3.00# ./imsimta version
Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (not compiled)
SunOS mirror 5.10 Generic_141444-09 sun4v sparc SUNW,Sun-Blade-T6320
Regards
Kamal

kkdas wrote:
Iam getting this error messages convergence version 1.3 from client machine Iexploere 7,8 Firefox 5.0
Firstly, there is no such version of Convergence. There is Convergence 1 Update 3 (a.k.a. Convergence patch 10). Convergence 1.3 doesn't exist.
You can get the exact version of Convergence by running "./iwcadmin -V" e.g.
-bash-3.00# ./iwcadmin -V
Sun Convergence 1.0-11.01 (built November 2 2009 - 20:48:35) Also there is no such version of Firefox. There is Firefox 3.5, Firefox 3.0 -- there is no Firefox 5.0.
Error
you have not authorized to perform this operation.There is no such error message. The following error message does exist however:
"Error: You are not authorized to perform this operation"
If you expect people to help you in the forums the least you can do is spend the time to provide correct information so we don't waste time searching for non-existent error messages.
Attachment size 3.3MB is ok if i try 4MB getting below this errorIf the attachment size is larger the Messaging Server allows you should get a popup with the message:
"Error: File too large"
What you can try is to increase the Messaging Server service.http.maxmessagesize and service.http.maxpostsize settings e.g.
./configutil -o service.http.maxmessagesize -v "12058624"
./configutil -o service.http.maxpostsize -v "12058624"
./stop-msg http
./start-msg httpRegards,
Shane.

How to Change Messages inline attribute value Dinamically

Hi
I'm using Jdev 11.3
Our requirement is if the facesmesage having onlly one message it should come like inline message
else it should come as a popup.
i tried EL for inline attribute but the problem is the method is calling only when submition
public boolean isInline()
boolean flag = true;
Iterator it = FacesContext.getCurrentInstance().getMessages();
if (it.hasNext())
flag = false;
return flag;
regards Abhilash

duplicate

How to change flash storage in mbp retina

can i change the flash drive of mbp retina 15" to 1TB?
is it easy to do or will i need to send to apple service?
thanks

Other than Apple, I think this is the only game in town:
http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Retina_2012

How to change the storage destination of Lob objects

Hi All
I've an existing table with a Lob entry.
I'd like to redirect all Lob segments in a precific tablespace. I'd like to do this without reconstruct the table. Is it possible ?
Thanks in advance,
A.G.

I think this should work:
alter table <table_name> move lob (XML_DATA.XMLDATA) store as <lob> (tablespace <new_tablespace>);

HOW TO CHANGE PROGRAMATICALLY LABELS OF BUTTONS AND ...

I want to do a HTMLDB application is some languages that user choice in web page.
I have resolve good how to change messages in pages, but I need to know how to change , labels in buttons, reports and in items.
¿How I can do this? Change this by program.
Any help wellcome.
Thanks in advanced.
Regards everybody.

Hi,
Normally, to translate your entire application you would export the application using Shared Components=>Translation Services. There is documentation on how to do this:
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14303/global.htm
You can also use Shared Components=>Manage Messages to translate individual items. If this is what you want, please let me know and I'll let you know what I did to achieve this.
Normally, the user would select their preferred language using a browser setting. Do you intend for them to select a language on a page?
Regards
Andy

How to change messaging storage on N97

Similar Messages

Maybe you are looking for