How to change metadata database after OIM/OAM install?
Hi everyone
We need to change the metadata/schema database for our OIM/OAM installation.
What I plan to do is:
1. Create the new db
2. Run the RCU utility for both OID and OAM.
3. Change the connection pool data source in the OAM Weblogic console.
Is there anything else I need to do?
I know there was a connection to the database done when I created the Domain from the OID home (using config.sh). I've tried to run this config script again but can't find any way to amend the domain, nor can I see how to do it in any of the (many) consoles.
Any help greatly appreciates!
D
Hi ,
At the time of configuration you will get an option to set the database connection parameters there you can point to your required DB schema.
Regards,
Ari
Similar Messages
-
HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?
i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.
As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM -
When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.
Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com -
How to recover my database after lose some archivelogs?
How to recover my database after lose some archivelogs?
What should I do next?
When I make a point-in-time recovery, I get the following message:
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/app/oracle/oradata/rcatalog/system01.dbf'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/25/2008 16:41:19
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 1 seq 17 lowscn 798237 found to restore
RMAN-06025: no backup of log thread 1 seq 16 lowscn 796977 found to restore
RMAN-06025: no backup of log thread 1 seq 15 lowscn 781378 found to restore
RMAN-06025: no backup of log thread 1 seq 14 lowscn 759019 found to restore
RMAN-06025: no backup of log thread 1 seq 13 lowscn 709039 found to restore
RMAN-06025: no backup of log thread 1 seq 12 lowscn 708479 found to restore
RMAN-06025: no backup of log thread 1 seq 11 lowscn 676234 found to restore
RMAN-06025: no backup of log thread 1 seq 10 lowscn 646686 found to restore
RMAN-06025: no backup of log thread 1 seq 9 lowscn 645207 found to restore
RMAN-06025: no backup of log thread 1 seq 8 lowscn 645199 found to restore
RMAN-06025: no backup of log thread 1 seq 7 lowscn 595363 found to restore
RMAN-06025: no backup of log thread 1 seq 6 lowscn 557197 found to restore
RMAN-06025: no backup of log thread 1 seq 5 lowscn 519102 found to restore
RMAN-06025: no backup of log thread 1 seq 4 lowscn 519053 found to restore
RMAN-06025: no backup of log thread 1 seq 3 lowscn 492824 found to restore
RMAN-06025: no backup of log thread 1 seq 2 lowscn 476888 found to restoreMixing thread
yours recovery asking a lot of archivelog ,you are in the situation now like you are in no archive mode recovery..which requires last cold backup.
What you can do is restore yours old backup with its old controlfile and then recover till before that miissing log by using recover database using backup controlfile.
Khurram -
HI, DOES ANYONE KNOW HOW TO CHANGE THE COMPUTER MY ILLUSTRATOR IS INSTALLED ON?
HI, DOES ANYONE KNOW HOW TO CHANGE THE COMPUTER MY ILLUSTRATOR IS INSTALLED ON?
This is just about as vague as you can get. Change it how? Maybe paint it red or something? What’s your problem?
-
How to change existing database block size in all tablespaces
Hi,
Need Help to change block size for my existing database which is in 8kb of block size.
I have read that we can only change block size during database creation, but i want to change it after database installation.
because for some reason i dont want to change the database installation script.
Can any one list the steps to change database block size for all existing table space (except system, temp ).
want to change it to 32kb.
Thank you for you time.
-Rushang Kansara> We are facing more and more physical reads, I thought by using 32K block size
we would resolve that..
A physical read reported by Oracle may not be - it could well be a logical read from the o/s file system cache and not a true physical read. With raw devices for example, a physical I/O reported by Oracle is indeed one as there is no o/s cache for raw devices. So one needs to be careful how aone interprets number like physical reads.
Lots of physical reads may not necessarily be a bad thing. In contrast, a high percentage of "good/fast" logical reads (i.e. a high % buffer cache hit ratio) may indicate a serious problem with application design - as the application is churning through the exact same data again and again and again. Applications should typically only make a single pass through a data set.
The best way to deal with physical reads is to make them less. Simple example. A database deals with a lot of inserts. Some bright developer decided to over-index a table. Numerous indexes for the same columns exist in difference physical column orders.
Oracle now spends a lot of time dealing (reading) with these indexes when inserting (or updating a row). A single write I/O may incur a 100 read I/Os as a result of these indexes needing to be maintained.
The bottom line is that "more and more physical I/O" is merely a symptom of a problem. Trying to speed these up could well be a wasted exercise. Besides, the most optimal approach to "lots of I/O" is to tune it to make less I/O.
I/O is the most expensive operation for a RDBMS. It is very difficult to make this expense less (i.e. make I/Os faster). It is more effective to make sure that you use this expensive resource in an optimal way.
Simple example. Single very large table with 4 indexes. Not very efficient design I/O wise. Single very large partitioned table with local indexes. This can reduce I/O on that table by up to 80% in my experience. -
How to change backend databases sql server 2008 R2 to Sql server 2012 datacenter
Hi
i have current sharepoint 2010 form has backend database is sql server 2008 R2 on windows server 2008 R2 Enterprise
and this form has
1 application server
1 Search server (index server)
1 wfe server ( all web applications are running)
1 databse server
here how i change this form back end to new windows server 2012 and sql server 2012 datacenter
adilInformation on SQL Aliases (using cliconfg.exe):
http://sqlandme.com/2011/05/05/create-sql-server-alias-cliconfg-exe/
You need to migrate content back into the database prior to migration:
http://technet.microsoft.com/en-us/library/ff628255(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff628257(v=office.14).aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to change the Time Zone in OAM log & audit files
Hi All,
I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
Could any one please tell me how to change the Time according to the place ?
It is an urgent plzzz.
Thanks & Regards,
Vaasu.could you find how to change the tine zone. i am also getting this problem
thanks -
How to change the database in Crystal reports
To give an overview there is one project going on where the oracle database is getting migrated from 10g to 11g.
All the details of database like IP, port etc are changing as part of this.
I can see the driver name configured as crdb_ado (Custom driver).
We have an test environment for 11g against which we have to point all the reports and test it.
Could you please let me know the below queries
Where and how to change the IP details in the crystal reports to point to new test and prod databases.
Overview on this crdb_ado driver
Basically the database is getting changed and we want the reports to point and run from the new database.
ThanksHi Vissu,
Thanks for your reply.
We need to change the database from the reports which are already running from central management console.
I can see a custom driver crdb_ado is being used and it connects to a database.
Could you please let me know where the database configuration is done.
Ideally we need to add one more database to a config file which i am not able to find.
I guess it should be similar to tnsnames.ora file in oracle where the different databases are stored.
From the above image I would like to know where the server details (NECTAR_Prod) would be configured.
Thanks in advance -
How to change page type after the fact
In the application builder, I click on an application and choose Details in View.
I get the list of pages I have in my app.
The page type column has:
Interactive Report
Navigation Form
Dynamic HTML
DML Form
Chart
Report
How do I change this column after a page has long been created?
Specifically, I want to the change "Dynamic HTML" to something else.
Why?
Because on this particular page, tabs do not work (error: page not found).
Buttons created among a regions items do not work (same error, page not found).
I need to use tab and buttons to go from this page to other pages.
And I am suspecting the page type may have something to do with my problem.
Thanks in advance for any pointers.Thanks for your consideration!
For my current app, a clinical management system,
I'd like to have, say, 1000 items.
(For other applications I am thinking about, but have no time,
nor expertise for now, I'd need millions of items,
each corresponding to a pixel of a graphic.)
Who cares if the current computers are too slow?
How about make it a parameter that can be changed
per app or per apex installation, and default to 100?
Some forms can be broken up logically, as people have helpfully suggested,
and I did follow that advise on some pages.
But other forms cannot be. People have put a lot of thought on designing
those forms, they are government or legal standards (or at least something more important
than computer performance), and people have been trained
with those original forms.
Consider the hoops I have to jump through to get more than 100 items
on a page I am currently working on:
Generate the items (INPUT type="text" and INPUT type="checkbox") using PLSQL
lots of htp.p('<INPUT ...>').
a JavaScript function to collect all the values on the page
and make up an XML string. submits this string to an application
process, and application process parses the XML string and does insert or update.
Another JavaScript to populate the items based on the current values of a row,
using an application process to retrieve the columns of a row.
There are about 150 items on this particular page.
All these are ok, because I was aware of the restriction of 100.
And because I wanted to generate my own HTML to mimic the original
form anyway.
Then things started to go weird.
I need buttons to go back to another page. and I use tabs.
Buttons to go back from this page,
when a button is created with "Create a button in a region position",
it works fine.
When a button is created with "Create a button displayed among this region's items",
it does not work, and I get HTTP 404, https://.../apex/wwv_flow.accept, page cannot be found.
But I need a button to work like the one created with "Create a button in a region position",
but displayed like the one created with "Create a button displayed among this region's items".
This is still not too bad. I saw the difference between the two kinds of buttons.
I copied the HTML code for the button "Create a button in a region position",
and used a display only item to create a Back button where I wanted:
'<table class="t15Button" cellspacing="0" cellpadding="0" border="0"><tr><td class="t15L"><img src="/i/themes/theme_15/button-l.gif"/></td>'||
'<td class="t15C">Back</td>'||
'<td class="t15R"><img src="/i/themes/theme_15/button-r.gif"/></td></tr></table>'
Here P145_BACK holds the page number to which I want this page to go back to.
Then I noticed that the tabs did not work any more. same error, page not found.
That's is when I got a little frustrated and posted for help on the forum.
Then I begin to undo my steps, and
by lucky accident, I noticed that, if none of the checkboxes is checked,
the tabs work fine. If at least one is checked, I get this error, page not found.
My current solution is to add a function of my own in the doSubmit(B) function in file apex_3_1.js,
which unchecks all checkboxes (o.checked=false).
And now, from this page of about 150 items,
the tabs are ok, and I have a button that is similar to one
created with "Create a button displayed among this region's items", except I created myself
using HTML.
I think this trick of using a custom function in doSubmit(), that unchecks or even hides
INPUT type="text" items (o_div.style.visibility = "hidden"; o_div.style.display = "none";)
should work in general. this function is only invoked when the user clicks the tab,
or buttons among a region's items.
Somebody said regarding restrictions on drugs or sex.....
you will not make people stop, you just make it harder or more expensive.
Same here and many other things, a restriction is just making things harder.
People will try to get around it.
Now that I have a solution, and I am aware of the problem, I'll calm down and
go back to my own thing for now. -
How to change the database in a business area
Hello All,
I am trying to figure out a way to change the database that a business area connects to. When I created the business area I selected to look at tables from the default database. Now I need to change that setting to connect to a different database. The tables are exactly the same on both databases. I just need to change the database that the business area looks at.
Is there a simple way of accomplishing this? I want to avoid having to recreate the business area.
Thank you very much in advanced for your help with this matter.
Del Benavides.Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West -
MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?
i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.
Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK -
How to know what database components have been installed on my database?
How to know what database components that have been installed on my database using SQL*PLUS tool? (10g 10.2.0)
Edited by: frank.qian on Nov 8, 2008 10:55 PMHi..
>
SQL> select comp_name,comp_id,version,status from dba_registry;
select comp_name,comp_id,version,status from dba_registry
The error on the first line:
ORA-00942:The table or view not exis.
>
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
sys >desc dba_registry
Name Null? Type
COMP_ID NOT NULL VARCHAR2(30)
COMP_NAME VARCHAR2(255)
VERSION VARCHAR2(30)
STATUS VARCHAR2(11)
MODIFIED VARCHAR2(20)
NAMESPACE NOT NULL VARCHAR2(30)
CONTROL NOT NULL VARCHAR2(30)
SCHEMA NOT NULL VARCHAR2(30)
PROCEDURE VARCHAR2(61)
STARTUP VARCHAR2(8)
PARENT_ID VARCHAR2(30)
OTHER_SCHEMAS VARCHAR2(4000)
sys >select COMP_ID,COMP_NAME,VERSION,STATUS from dba_registry;
COMP_ID COMP_NAME VERSION STATUS
CATALOG Oracle Database Catalog Views 10.2.0.4.0 VALID
CATPROC Oracle Database Packages and T 10.2.0.4.0 VALID
ypes
OWM Oracle Workspace Manager 10.2.0.4.3 VALID
JAVAVM JServer JAVA Virtual Machine 10.2.0.4.0 VALID
XML Oracle XDK 10.2.0.4.0 VALID
CATJAVA Oracle Database Java Packages 10.2.0.4.0 VALID
EXF Oracle Expression Filter 10.2.0.4.0 VALID
ODM Oracle Data Mining 10.2.0.4.0 VALID
CONTEXT Oracle Text 10.2.0.4.0 VALID
XDB Oracle XML Database 10.2.0.4.0 VALID
RUL Oracle Rules Manager 10.2.0.4.0 VALID
ORDIM Oracle interMedia 10.2.0.4.0 VALID
APS OLAP Analytic Workspace 10.2.0.4.0 VALID
XOQ Oracle OLAP API 10.2.0.4.0 VALID
AMD OLAP Catalog 10.2.0.4.0 VALID
SDO Spatial 10.2.0.4.0 VALID
EM Oracle Enterprise Manager 10.2.0.4.0 VALID -
How to change field values AFTER Inbound IDOC Posted successfully
Hi SAP Experts,
In my project I receive the inbound IDOC PORDCR05 from PI and posted as an Purchase Order in ECC.
I create the Z process code and Z function module (which is a copy version of IDOC_INPUT_PORDCR) and complete all the necessary configuration steps. It works perfectly.
My problem is: I have to collect some inbound idocs (that satisfied some criteria) and change the value of field EKPO-TXJCD and EKKN-KOSTL of the PO AFTER it posted successfully (means the purchase order is created and save in database).
How can I do this? I've try to put the logic code in Z function module, but it does not work, since at that time, the Inbound IDOC is not updated to the database yet.
Aprreciate your advise.
Regards,
Elaine.Hi Elaine ,
as per your cretiria pick the idocs and take created PO# from status 53 & use the BAPI (BAPI_PO_CHANGE) to change the neccessary values in the PO. We can't reprocess those idocs again.
Reddy -
How to change the database character set on physical standby database?
Hi,
We have a database with character set WE8ISO8859P1 and migrated the character set to WE8MSWIN1252 using csscan/csalter scripts. This database has a physical standby database setup also and after the migration, the physical standby database is still showing the character set as WE8ISO8859P1. How can I change the characterset on the physical standby? I raised a Service Request with Oracle, and they said that recreating the standby database is the only supported way of changing the char set on the standby database. Is this true?
Thanks,
SreekanthThank you, Robert, for your reply.
The standby is in sync with the primary.
see below
SYS@sisprod>select * from v$dataguard_stats;
NAME VALUE UNIT TIME_COMPUTED
apply finish time +00 00:00:00.0 day(2) to second(1) interval 12-NOV-2009 14:02:46
apply lag +00 00:00:00 day(2) to second(0) interval 12-NOV-2009 14:02:46
estimated startup time 11 second 12-NOV-2009 14:02:46
standby has been open N 12-NOV-2009 14:02:46
transport lag +00 00:00:00 day(2) to second(0) interval 12-NOV-2009 14:02:46
SYS@sisprod>
I am selecting from v$nls_parameters;
I don't know how to restore the controlfile from primary. Could you please tell me how to do it?
Thanks,
Sreekanth
Maybe you are looking for
-
How to Configure two standalone Server to access with eachother
Hi All, I have two stand alone Servers (SQL 2000) configured in two PCs in different locations (Location A & Location B) . I want to access Location A database from Location B Viz-Versa. 1. I have a STATIC IP provided by ISP and I m using a router (
-
Can Coldfusion Report Builder Lock .MDB Files?
I have been seeing an issue where an .mdb file will be locked into a read only mode state. There is no .ldb lock file on the object, but when I open the DB up a banner pops up at the top stating it is in read only mode. While it is in this mode it ca
-
Saving EPS Files in CS4 without the artboard
I am having an issue placing eps files using CS4. If you save an EPS file in Illustrator CS4, the resulting file retains the entire artboard... So when you place the file in Photoshop, the graphic is too small. If I open this eps and simply resave i
-
I get this error message from Windows: Instruction af 0x76f8de2d referred memey at 0x000000ca. Memory could not be written. The iTunes stops working. I am running Windows Vista with lastest updates from Microsoft. My iTunes folder is located on a QNA
-
Design question: How to double extend?
I know that extending two classes cannot be done, so is there a work around? I have two classes: Class_A, Class_B. I want all the methods within both of the classes to be usable in Class_C So I want: Class_C extends Class_A, Class_B. Thanks for any a